HMC1087-Die
Product Specifications
HMC1087-Die
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The HMC1087-Die from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
HMC1087-Die: 8 W across 2 GHz to 20 GHz, and the efficiency that halves at the top
The HMC1087-Die is a gallium nitride monolithic power amplifier covering 2 GHz to 20 GHz, with 39 dBm saturated, 11 dB of small signal gain and 43.5 dBm of output third order intercept from a 28 V supply at 850 mA quiescent. It is the wideband member of the pair with the 2 GHz to 6 GHz part, and the number that decides whether it suits a system is the power added efficiency at the top of the band, which is about half the figure at the bottom.
Published values
| Parameter | Value |
|---|---|
| Frequency range | 2 GHz to 20 GHz |
| Saturated output power | 39 dBm to 12 GHz, 38.5 dBm from 12 to 20 GHz |
| Compressed output power, 3 dB | 38.5 dBm to 12 GHz, 37.5 dBm from 12 to 20 GHz |
| Small signal gain | 11 dB to 12 GHz, 10.5 dB from 12 to 17 GHz, 10 dB from 17 to 20 GHz |
| Output third order intercept | 43.5 dBm to 12 GHz, 42.5 dBm from 12 to 20 GHz |
| Power added efficiency | 30% to 12 GHz, 17% from 12 to 20 GHz |
| Supply | 28 V at 850 mA quiescent |
| Gate bias | VGG between -8 V and 0 V to set 850 mA |
| Input and output match | 50 ohm, internally matched |
| Package of the published document | 10-lead flange mount |
Efficiency, not power, is what changes
39 dBm to 12 GHz and 38.5 dBm from 12 GHz to 20 GHz is a 0.5 dB change in output, which looks minor. The efficiency falls from 30 percent to 17 percent over the same split, so the dc input for the same output rises from 26.4 W to 46.5 W and the heat rises by 20 W.
A board built around the bottom of the band therefore cannot simply be used at the top. The heatsink, the copper area and the airflow all have to be sized for the 17 percent case, and a programme that qualifies at 8 GHz and ships at 18 GHz will find the difference in the field.
Quiescent current against driven current
850 mA at 28 V is 23.8 W. At 30 percent efficiency, 39 dBm, or 7.9 W, requires 26.4 W, which is 943 mA, so at the bottom of the band the quiescent figure is close to the operating figure. At 17 percent the same output requires 46.5 W, or 1.66 A, which is nearly double the quiescent current.
The supply therefore has to be sized for 1.7 A, and the difference between the two ends of the band is the reason a single current figure cannot be used for both. This is the same trap as on the higher power part in the family, and it is the most common error in a first power budget.
The 2 GHz to 20 GHz match
A decade of bandwidth from one 50 ohm matched die is the reason this part exists. A narrow band alternative at either end would give more gain and better efficiency, so the case for this part is an application that has to work across the whole range, such as an electronic warfare receiver or a multi band test instrument.
The cost of the wideband match is visible in the gain: 11 dB against 23 dB for the 2 GHz to 6 GHz part, because the same output device is matched over ten times the bandwidth. A chain built around this part needs more gain elsewhere, and that gain has to come with its own linearity.
Assembly and the die option
The published document describes the F10 flange mount body. The die removes the package, and above 10 GHz that matters, since the package transition is a significant part of the loss at the top of the band. A module built with the die can hold a wider bandwidth and a better match than the packaged part, at the cost of a chip and wire process and a carrier that has to be specified.
The thermal path on the die is through the backside into the carrier, so the attach material and the carrier thickness are part of the electrical specification as well as the thermal one. A carrier that is too thin spreads heat poorly, and one that is too thick adds inductance in the ground return.
When an order code in this family cannot be found, the amplifier cross reference lists what else does the same job, defense grade components covers what to check before a part is dropped into an existing board, and OEM procurement is the route we take on a live shortage.
Two questions buyers ask
Why does the efficiency drop from 30 to 17 percent above 12 GHz? The published table splits the band at 12 GHz, and the gain, compression and efficiency all fall above it. At 17 percent the dc input for 38.5 dBm is about 46.5 W, or 1.66 A at 28 V.
Is this part a replacement for the 2 GHz to 6 GHz member of the family? It covers the same low band and extends to 20 GHz, but with 11 dB of gain against 23 dB and 8 W against 25 W. It is a wideband part and not a substitute where the narrow band power is needed.