Contact Us

HMC1086F10

Brand: Analog Devices
Analog Devices HMC1086F10 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

HMC1086F10 — Analog & Mixed-Signal ICs | Superb Automation

HMC1086F10

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The HMC1086F10 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

HMC1086F10: 25 W at 2 GHz to 6 GHz and 52 W of heat behind it

The HMC1086F10 is a gallium nitride MMIC power amplifier in a 10-lead flange mount package covering 2 GHz to 6 GHz with 23 dB to 24 dB of small signal gain, 44.5 dBm saturated output, 41 dBm at four decibels of compression, 46 dBm of output third order intercept at 33 dBm per tone and 1100 mA of quiescent current from 28 V. Power added efficiency is 35 percent over 2 GHz to 4 GHz and 32 percent over 4 GHz to 6 GHz. The gate is adjusted between minus 8 V and 0 V to set the quiescent point, which is a wider range than any of the pHEMT parts and reflects how a gallium nitride stage behaves.

Published values

ParameterValue
Frequency range2 GHz to 6 GHz
Small signal gain23 dB over 2 GHz to 4 GHz, 24 dB over 4 GHz to 6 GHz
Gain flatness1 dB over 2 GHz to 4 GHz, 0.5 dB over 4 GHz to 6 GHz
Saturated output power44.5 dBm, about 28 W
Output power at 4 dB compression41 dBm
Power gain at 4 dB compression20 dB
Power gain at saturation11 dB
Output third order intercept46 dBm at 33 dBm per tone
Power added efficiency35 percent 2 to 4 GHz, 32 percent 4 to 6 GHz
Quiescent supply28 V at 1100 mA
Gate adjustmentminus 8 V to 0 V to reach 1100 mA
Package10-lead flange mount, 50 ohm matched, dc blocked

The quiescent current is not the current at 44.5 dBm

1100 mA at 28 V is 30.8 W, and that is the quiescent figure with no drive. At 44.5 dBm the output is 28.2 W, and the published efficiency of 35 percent puts the DC input at 80.5 W, which is 2.88 A at 28 V. The difference between 30.8 W and 80.5 W is radio frequency current, and it is the number that sizes the supply, the cable and the bulk capacitance.

So 52 W becomes heat at saturation. That is not a number a laminate handles. It is why the part is a flange mount: the flange bolts to a heat sink, the heat sink carries the 52 W into forced air or into a cold plate, and the thermal resistance from junction to flange is quoted against that arrangement. A build that mounts the flange on a board without a heat sink below it will see the gain fall as the die heats, because the quiescent point set at 25 degrees is no longer 1100 mA at 100 degrees.

Eleven decibels of gain at saturation and twenty at four decibels of compression

The power gain falls from 20 dB at four decibels of compression to 11 dB at saturation, and the small signal gain is 23 dB to 24 dB. That is a stage being driven a long way into compression, which is normal for a saturated power stage and is what makes the driver requirement severe: the input has to deliver 44.5 minus 11, which is 33.5 dBm, at saturation.

A driver that can only reach 30 dBm will leave the output at about 41 dBm, which looks like a 3.5 dB shortfall in the final stage and is really a driver problem. This is the most common way a 25 W stage measures 12 W on a first build, and it is worth checking the driver at its own compression point before the final stage is blamed.

Gallium nitride, thermal cycling and the gate range

The gate range of minus 8 V to 0 V is wider than a pHEMT part and reflects the threshold spread of a gallium nitride process. It also means the bias network has to be able to produce a genuinely negative rail, not a divider off the 28 V supply, and it has to keep that rail stable while the drain current changes by a factor of nearly three between quiescent and saturation.

Thermal cycling is the other difference. A gallium nitride die on a flange with 52 W of dissipation going on and off puts the attach and the flange interface through a large temperature swing, and the failure mode that follows is a delamination that shows up as a rising thermal resistance rather than as an electrical fault. Recording the flange temperature at a fixed drive level on each build is the cheapest way to see it coming.

Sourcing notes for this family: the RF power transistor cross reference holds the cross references, defense grade components is the pre substitution check, and RF procurement is what we use when the part on the drawing is not on the shelf.

Two questions buyers ask

Is the 1100 mA the current to size the 28 V supply for? No. It is the quiescent current. At saturation the published efficiency puts the DC input at about 80 W, which is 2.88 A at 28 V, and the supply has to deliver that during the pulse or continuous transmission.

Can the HMC1086F10 be mounted on a normal board without a heat sink? Not with 52 W to remove. The flange mount exists so the part can be bolted to a heat sink or cold plate. Without that path the junction temperature rises, the quiescent point moves and the gain and power fall long before anything fails.