Contact Us

ADV7511KSTZ-P

Brand: Analog Devices
Analog Devices ADV7511KSTZ-P is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADV7511KSTZ-P — Analog & Mixed-Signal ICs | Superb Automation

ADV7511KSTZ-P

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADV7511KSTZ-P from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADV7511KSTZ-P: 225 MHz HDMI transmitter with audio return channel

The ADV7511KSTZ-P is a high definition multimedia interface transmitter in a 100-lead LQFP, screened over 0 to +70 C, with a 225 MHz TMDS clock. It carries HDMI 1.4 features including the audio return channel, 3D video and 12-bit deep colour, plus an integrated CEC controller and HDCP 1.4 on chip. Boards that add an HDMI output to an existing video pipeline use it because it needs no external HDCP memory and no audio master clock.

Published values

ParameterValue
FunctionHDMI 1.4 transmitter, DVI 1.0 compatible
TMDS clock225 MHz maximum
Deep colour12-bit in all video formats up to 1080p
HDCP1.4 with on-chip keys
CECIntegrated buffer and controller
Audio in8 channel I2S and S/PDIF, up to 192 kHz in the feature list
Audio return channelSupported, HEAC pair
ColourProgrammable two way colour space converter, RGB and YCbCr
Video input36-bit pixel bus, 1.8 V to 3.3 V logic levels accepted
ControlOn-chip microcontroller for HDCP and EDID reads, 5 V tolerant I2C and hot plug
Package100-lead LQFP
Temperature0 C to +70 C

225 MHz is exactly the 1080p60 deep colour ceiling

1080p at 60 Hz with 8-bit colour needs a 148.5 MHz TMDS clock. Deep colour multiplies that by 1.5 for 12 bits, which is 222.75 MHz, and the part's 225 MHz covers it with about one percent to spare. Anything wider, a 1200 line frame or 16-bit colour at the same rate, lands above the ceiling and is outside the part.

That arithmetic is worth doing before a customer asks for 4K. The answer is not that the part is slow, it is that the interface generation changed: 4K at 60 Hz needs a different TMDS rate and a different device, and no amount of register configuration moves this one.

Two audio numbers that do not agree

The feature list on the first page gives 8 channel LPCM up to 192 kHz, and the general description a few lines later says the same I2S path can carry up to 768 kHz. Both are in the same document. A board that has to pass a 384 kHz source needs the second figure confirmed against the full specification before the board file is fixed.

The audio return channel is the HDMI 1.4 feature that carries television audio back up the cable to a receiver, and it uses the HEAC pair rather than the TMDS lanes. Its presence is the main reason this part is chosen over the earlier 1.3 transmitters in a soundbar or an AV receiver.

Buyers usually arrive at the ADC and DAC cross reference to find the family alternatives, then use the obsolete part cross reference hub to confirm a substitute before it is fitted; component obsolescence management is the routine for a part that has already stopped shipping.

Two questions buyers ask

Does this transmitter support 4K? No. The TMDS clock stops at 225 MHz, which is the 1080p60 deep colour ceiling. A 4K frame needs a higher rate and a different device, not a register change.

Is HDCP handled without external memory? Yes. The keys are on chip and the internal microcontroller runs the authentication and the EDID reads, so there is nothing to program on the production line.