Contact Us

ADRF5020BCCZN

Brand: Analog Devices
Analog Devices ADRF5020BCCZN is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADRF5020BCCZN — Analog & Mixed-Signal ICs | Superb Automation

ADRF5020BCCZN

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADRF5020BCCZN from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADRF5020: 30 GHz of Switching Range on a Dual Supply, With 24 dBm as the Real Limit

The ADRF5020 is a silicon single pole double throw switch covering 100 MHz to 30 GHz in a 3 x 3 mm land grid array package. It is nonreflective on all three ports, holds 60 dB of isolation at 30 GHz and 2.0 dB of insertion loss at the same frequency, and it settles in 15 ns. The two figures that decide whether it can be dropped into an existing signal chain are the 24 dBm power handling and the dual supply, because both of them reach outside the switch itself and touch the rest of the board.

What the RF path looks like across the band

ParameterValueWhere it matters
Frequency range100 MHz to 30 GHzOne part covers IF, microwave and the low millimetre wave band
Insertion loss1.2 dB to 10 GHz, 1.5 dB to 20 GHz, 2.0 dB to 30 GHzThe loss doubles between the bottom and the top of the band
Isolation65 dB to 10 GHz, 60 dB to 30 GHzSets how much LO leaks into the receive path in a TDD front end
Power handling24 dBm through the path, 24 dBm into a terminated portThe off port is not a safe place for a hot signal either
Compression and intercept+28 dBm and +52 dBm typicalWell above the handling limit, so the limit is thermal, not linearity
Settling15 ns to 0.1 dB of the final outputFast enough for a TDD frame guard period

Two supplies, and only one of them is about the logic

The part runs from a positive rail of 3.3 V to 5 V and a negative rail of -2.5 V, and its control inputs are CMOS and LVTTL compatible. The negative rail is part of the RF path. A board that keeps the positive rail and the logic but drops the -2.5 V converter because the switch still toggles will find the part switching with the wrong insertion loss and isolation, and the fault looks like a bad lot rather than a missing rail. Power sequencing on the negative rail is worth a look during bring up as well, since the control lines can be asserted before the negative supply is up.

24 dBm on both ports changes the front end budget

A switch that handles the same power on the through path and on the terminated path suits a TDD front end where the antenna port is shared and the transmitter can be live while the receiver branch is switched out. It does not suit an absorptive arrangement that expects the off port to swallow a kilowatt; 24 dBm is 250 mW, and anything above it has to be kept away from the switch by a circulator or by sequencing the transmitter off first.

ESD class 1 at 1 kV

The human body model rating is 1 kV, which is low for a packaged part and lower than most of the amplifiers it will sit next to. That is a statement about handling, not about field reliability: the switch belongs on the list of parts that are only handled at an ESD workstation, with wrist strap and ionised air, and it should not be the part that a technician picks up with bare fingers during rework. Incoming inspection should also avoid unbagging the reel outside a protected area.

Where it fits, and the sourcing question

The replacement question for a wideband switch is rarely about the throw count. It is about the supply rails, the power handling and whether the part is reflective or not, because a reflective replacement in a nonreflective socket changes the return loss of the whole node. The RF component sourcing page lists the switch family, the pin to pin cross reference page covers footprint and control compatibility, and incoming lots follow the incoming inspection plan.