Contact Us

ADR4540BRZ-R7

Brand: Analog Devices
Analog Devices ADR4540BRZ-R7 is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADR4540BRZ-R7 — Analog & Mixed-Signal ICs | Superb Automation

ADR4540BRZ-R7

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADR4540BRZ-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

ADR4540BRZ-R7: A 4.096 V Reference with 2 ppm per Degree C and 0.02 Percent Initial Error

What this part is

The ADR4540 is a 4.096 V series voltage reference in the B grade, with a maximum temperature coefficient of 2 ppm per degree C across minus 40 to plus 125 degrees C and a maximum initial error of 0.02 percent. The output voltage is chosen because it divides exactly into the full scale of a 12 or 16 bit converter, so a converter using it needs no scaling amplifier and no software correction of the span.

It takes an input of 3 V to 15 V, sinks and sources 10 mA, and draws a maximum of 950 microamps of quiescent current, with a 300 mV dropout at 2 mA for outputs of 3 V and above. The part is offered in an 8 lead small outline body and a leadless chip carrier, is qualified to AEC-Q100, and quotes a long term drift of 8 ppm typical over 4,500 hours. The grades differ mainly in temperature coefficient and in the temperature range over which that coefficient is guaranteed, which is the field to read before choosing a letter.

Published figures that matter to a buyer

Output4.096 V
Initial error, B, C and D gradesplus or minus 0.02 percent maximum
Temperature coefficient, B grade2 ppm per degree C maximum, minus 40 to plus 125 degrees C
Temperature coefficient, C grade1 ppm per degree C maximum, 0 to 70 degrees C
Temperature coefficient, A grade4 ppm per degree C maximum, minus 40 to plus 125 degrees C
Low frequency noise1 microvolt peak to peak, quoted at 2.048 V
Input range3 V to 15 V
Output currentplus and minus 10 mA
Quiescent current950 microamps maximum
Dropout300 mV at 2 mA for outputs of 3 V and above
Long term drift8 ppm typical at 4,500 hours
QualificationAEC-Q100

Where the headline numbers stop

Both quoted accuracy figures have to be turned into converter counts before they mean anything. The initial error of 0.02 percent on 4.096 V is 819 microvolts, which against a 16 bit count of 62.5 microvolts is 13.1 counts. The 2 ppm per degree C over the full 165 degree span is 330 ppm, or 1.35 mV, which is 21.6 counts. Added, they are 2.17 mV, or 34.7 counts, or 0.053 percent: the drift is the larger of the two terms, so a budget that keeps the initial error and ignores the coefficient is keeping the smaller half.

The grade letters are not interchangeable. The C and D grades reach 1 ppm and 0.8 ppm per degree C but only from 0 to 70 degrees C, so they are not substitutes for the B grade in an industrial or automotive build even though their coefficients look better on a comparison table. The A grade is 4 ppm over the full range, which is double the B grade for a lower price.

The noise figure of 1 microvolt peak to peak is quoted at the 2.048 V output, and this order code is the 4.096 V member, so it is not covered by that number directly. Treat it as the family indication rather than as a specification of this output: noise in a series reference scales with the output, so the 4.096 V part is nearer 2 microvolts peak to peak, which is 32 counts of a 16 bit converter and is small next to the 34.7 counts of initial error plus drift. The long term drift of 8 ppm is 32.8 microvolts, about half a count.

Applications where it fits

  • 16 bit data acquisition, where the reference sets the accuracy of the whole channel.
  • Precision measurement instruments and industrial transmitters.
  • Medical devices that need a low drift reference over a wide temperature range.
  • Automotive battery monitoring, where the AEC-Q100 grade is required.
  • Portable equipment, where 950 microamps and 300 mV of dropout keep the reference alive on a low rail.

Two questions buyers ask

Can a 5 V rail feed this 4.096 V reference? Yes, with 904 mV of headroom, which is well above the 300 mV dropout. The case that fails is a 4.096 V output from a 3.3 V rail, which is below the output and outside the 3 V to 15 V input range in the sense that matters: the input must be above the output plus dropout, and a 3.3 V rail cannot produce 4.096 V.

Does the 10 mA output current mean it can drive a bridge directly? It means the reference can source and sink 10 mA, which is enough for a converter reference pin and a light load. A 350 ohm bridge drawing 10 mA or more leaves no current for anything else and puts the reference at its limit, where the output impedance and the load regulation start to appear in the measurement. A buffer amplifier belongs in that circuit.

Sourcing notes and next step

ADR4540BRZ-R7 is the B grade in the 8 lead small outline body on tape and reel. The grade letter sits before the body code and the two together are the part: a quotation that offers an A grade against a B grade request is a different specification, not a discount. The ADC and DAC cross reference page sets out the reference fields to compare, the drop in replacement verification page covers what to check before accepting a substitute, and the analog and mixed signal IC family page lists the rest of the reference line.

Request Quote — In Stock, 100% New & Original, Full Warranty