ADP7142ACPZN3.3-R7
Product Specifications
ADP7142ACPZN3.3-R7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADP7142ACPZN3.3-R7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADP7142ACPZN3.3-R7: The 3.3 V Fixed Option of the 40 V Regulator
What this part is
This order code is the 3.3 V fixed output version of the ADP7142, in the same 2 mm by 2 mm six lead LFCSP and on the same 7 inch reel. The electrical behaviour is the family behaviour: a 2.7 V to 40 V input range, 200 mA of output current, 11 uV rms of output noise, 88 dB of rejection at 10 kHz and a 200 mV dropout at full load. What changes is that the feedback divider is inside the package and trimmed, so the output accuracy at 3.3 V is the quoted plus or minus 0.8 percent initial without any external resistors.
Fixing the voltage in silicon is worth more than it looks. An adjustable build at 3.3 V needs two resistors, and their tolerance and drift add to the regulator error, while the noise of the divider sits directly on the feedback node. The fixed part removes both, and it also removes the feedback node where noise coupling into a trace turns into output noise.
Published figures that matter to a buyer
| Output voltage | 3.3 V fixed |
| Input voltage range | 2.7 V to 40 V |
| Output current | 200 mA maximum |
| Output noise | 11 uV rms |
| Power supply rejection | 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz |
| Initial accuracy | plus or minus 0.8 percent |
| Accuracy over line, load and temperature | minus 1.2 to plus 1.5 percent to 85 degrees C, plus or minus 1.8 percent to 125 degrees C |
| Dropout | 200 mV typical at 200 mA |
| Quiescent current | 50 uA typical |
| Shutdown current | 3.0 uA at 40 V input |
| Output capacitor | 2.2 uF ceramic |
| Package | 2 mm by 2 mm six lead LFCSP |
Where the headline numbers stop
At a 24 V input and 200 mA the regulator burns 4.14 W, and at 40 V it burns 7.34 W, so the usable current at the top of the input range is set by the package and not by the 200 mA rating. The 200 mV dropout at 200 mA is a 1 Ohm equivalent series resistance, which means the input has to stay above 3.5 V for the output to hold 3.3 V at full load, and above 3.5 V plus the tolerance of the source at any load.
The accuracy over temperature is asymmetric: minus 1.2 percent at the cold end and plus 1.5 percent at the hot end to 85 degrees C, widening to plus or minus 1.8 percent at 125 degrees C. On a 3.3 V rail that is 3.26 V to 3.35 V at ordinary temperatures and 3.24 V to 3.36 V at the top of the range. A load that needs 3.3 V plus or minus 2 percent is therefore inside the regulator, and a load that needs plus or minus 1 percent is not, which is the sort of thing that decides whether a separate reference is needed.
Applications where it fits
- Industrial controllers that run a 24 V bus and need a quiet 3.3 V rail for a microcontroller and its analogue front end.
- Automotive modules where 3.3 V logic and sensors share a rail fed from a 12 V or 24 V system.
- Instrumentation where a 3.3 V reference-quality rail feeds a converter and the noise at 1 MHz matters.
- Communication boards that regulate a 3.3 V local rail from a 12 V backplane.
Two questions buyers ask
Is this the same die as the adjustable version? Yes. The 3.3 V option is a trimmed fixed version of the same regulator, so the noise, rejection and dropout figures are the same and the difference is the internal divider. A board that was built adjustable at 3.3 V can move to the fixed part and gain accuracy, but the feedback node has to be removed rather than left floating.
Can the output be trimmed above 3.3 V? The vendor states that each fixed output can be adjusted above its set point with an external divider. On this order code that means adding a resistor from the feedback node to ground raises the output, which is a way to reach 3.4 V or 3.6 V from stock rather than ordering a special voltage.
Sourcing notes and next step
The ADP7142ACPZN3.3-R7 is the fixed 3.3 V option in the 2 mm LFCSP on a 7 inch reel. The same voltage is available in the 8 lead SOIC and 5 lead TSOT bodies, and the order code changes with the package even though the die does not. The analog and mixed signal IC family page lists the regulator line, the power management cross reference page covers the substitution route across the fixed voltage options, and the BOM shortage recovery page sets out how a build is protected when one voltage option is on allocation.
Request Quote — In Stock, 100% New & Original, Full Warranty