Contact Us

ADP122AUJZ-3

Brand: Analog Devices
Analog Devices ADP122AUJZ-3 is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADP122AUJZ-3 — Analog & Mixed-Signal ICs | Superb Automation

ADP122AUJZ-3

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADP122AUJZ-3 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADP122AUJZ-3: a 300 mA LDO chosen for 45 uA of quiescent current, not for speed

The ADP122AUJZ-3 is the fixed output member of the ADP122/ADP123 pair, a CMOS linear regulator that takes 2.3 V to 5.5 V in and delivers up to 300 mA with 45 uA of quiescent current at no load. On a battery product the quiescent current is the specification that decides whether the product lasts a month or a week, and on this part it is quoted at 170 uA at full load, which is the number to use when the rail is left on and the load never sleeps.

Published values

ParameterValue
Maximum output current300 mA
Input voltage range2.3 V to 5.5 V
Quiescent current, no load45 uA
Quiescent current at full load170 uA
Shutdown currentBelow 1 uA
Dropout at 300 mA85 mV
Initial accuracy1%
PSRR at 100 kHz60 dB
Fixed output options31 values from 1.75 V to 3.3 V
Adjustable versionADP123, 0.8 V to 5.0 V
Output capacitor1.0 uF ceramic
Packages5-lead TSOT, 6-lead 2 mm x 2 mm LFCSP

What 45 uA buys on a battery rail

A 45 uA quiescent current is roughly a fifth of what a general purpose LDO of the same current rating takes. On a product that sits idle for most of its life, such as a meter reading module or a location tag, the difference between 45 uA and 250 uA is measurable in months of shelf life. The figure only holds with the enable pin high and no load; once the load is drawing the full 300 mA the ground current rises to 170 uA, so a rail that is always on should be calculated at the loaded figure, not the headline one.

The same part has to be judged on what it gives up. 85 mV of dropout at 300 mA is good for a low current regulator, but the transient response is slower than a part with ten times the quiescent current, so a load that steps from 1 mA to 300 mA in a microsecond will show a deeper dip than the noise figure suggests.

The 31 voltage options and the ordering trap

The fixed version covers 1.75 V to 3.3 V in 31 steps. Because the suffix on the order code carries the voltage, two parts that look identical in a bill of materials can be 200 mV apart, and a substitute picked by family name alone will pass a visual check and fail at the first power up. The rule we apply is that the full order code, including the voltage suffix, is compared character by character before any reel is released.

Where this part fits and where it does not

Portable and battery equipment, meter reading modules, GPS and location units, medical instrumentation and point of sale terminals are the published applications. It is a poor choice as a post regulator behind a switching supply on a noise sensitive converter rail, because the PSRR curve falls away above 100 kHz and the quiescent current budget leaves no room for the bandwidth needed to reject a 2 MHz switching ripple.

Sourcing notes for this family: the power management cross reference holds the cross references, how to reduce component cost is the pre substitution check, and one stop BOM sourcing is what we use when the part on the drawing is not on the shelf.

Two questions buyers ask

Does the ADP122 need a minimum load to stay in regulation? No, it is stable and in regulation with no load, which is why the 45 uA no load figure is quoted. A minimum load requirement is a feature of older bipolar regulators, not of this part.

Can the ADP123 adjustable version replace a fixed ADP122? Only with two resistors added and the board checked for the extra node. The die is shared but the pin function differs, so it is a rework, not a drop in.