Contact Us

ADM3485EARZ

Brand: Analog Devices
Analog Devices ADM3485EARZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

ADM3485EARZ — Analog & Mixed-Signal ICs | Superb Automation

ADM3485EARZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The ADM3485EARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

ADM3485EARZ: twelve megabit RS-485 at 3.3 V

The ADM3485EARZ is a 3.3 V half duplex RS-485 transceiver in an 8-lead narrow SOIC with 15 kV human body model protection and a 12 Mbps data rate. It is the fast 3.3 V member of the same footprint family as the 500 kbps slew limited parts, and the difference between the two is entirely about edges.

Published values

ParameterValue
Functionhalf duplex RS-485 driver and receiver
Supply3.3 V
Data rate12 Mbps
ESD on bus pins15 kV human body model
Common mode range-7 V to +12 V
Temperature range-40 C to +85 C
Package8-lead narrow SOIC

Twelve megabits is 83 ns per bit

At 12 Mbps a bit is 83.3 ns. A driver delay of about 10 ns and a receiver delay of about 15 ns consume 30 percent of that before the cable is counted, so the link is a short backplane or a short cable link rather than a field bus. At 500 kbps, the same delays are 1.25 percent of a 2 us bit.

That ratio is the whole argument between this part and the slew limited member of the family. Both are 3.3 V, both are 8-lead, both carry 15 kV. One is built for a 30 cm backplane and the other for a 100 m cable, and the order code is the only thing that distinguishes them on a bill of materials.

Edges, emissions and the cable

Faster edges mean more energy at high frequency, and a cable that is not terminated at both ends turns that energy into reflections. At 12 Mbps a 100 m cable is electrically long: the propagation delay one way is comparable to a bit, so the reflection arrives inside the frame rather than after it.

The practical check is the rise time against the cable length. A part specified for 12 Mbps is not a part specified for a long line at 12 Mbps; the same device can be used at 1 Mbps on a long line if the protocol allows, and that is often the right answer.

Common mode range and protection

The -7 V to +12 V common mode range is the same as the 5 V parts, so a mixed 3.3 V and 5 V bus works. The 15 kV human body model rating on the bus pins is the highest in the 8-lead family and it is on the pins that reach the connector, which is where it is needed.

The receiver thresholds stay inside the RS-485 window at 3.3 V, so the part does not need a divided bus or a level shift. That is the point of a 3.3 V RS-485 transceiver: the bus is unchanged and only the local supply moves.

Replacement checks

Candidates on this footprint differ in data rate, in whether the edges are slew limited and in the temperature option. A slower part is a safe substitution on a short link and a wrong one where the protocol needs the rate; a faster part is the reverse.

The pages below hold the cross reference, the acceptance test and the delivery options.

Sourcing notes for this family: the pin to pin cross reference holds the cross references, the ADI second source page is the pre substitution check, and component lead time solutions is what we use when the part on the drawing is not on the shelf.

Two questions buyers ask

Is the ADM3485EARZ a drop in replacement for the ADM3075EARZ? The footprint and the supply are the same. The data rate is 12 Mbps against 500 kbps, and the 500 kbps part is slew limited for long cables.

What terminates the bus? The transceiver does not include terminators. A 120 ohm resistor at each end of the cable is the usual arrangement, and its power rating follows from the driver output into that load.