ADM3232EARUZ-REEL7
Product Specifications
ADM3232EARUZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADM3232EARUZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
ADM3232EARUZ-REEL7: a 3.3 V RS-232 transceiver with two drivers and two receivers
What this order code is
ADM3232EARUZ-REEL7 is a two driver, two receiver RS-232 transceiver that runs from a single 3.3 V supply at up to 460 kbps, in a 16-lead TSSOP. It conforms to EIA-232E and CCITT V.28, and it generates its own positive and negative rails from the 3.3 V supply using four external 0.1 microfarad charge pump capacitors.
The E in the family name is the ESD grade: plus or minus 15 kV air gap discharge and plus or minus 8 kV contact discharge to IEC 1000-4-2 on both the RS-232 pins and the logic pins. Those are two different tests and both are quoted, which matters because a port that is plugged in while live sees the contact event and a port that is approached by a charged cable sees the air gap event. The part is aimed at electrically harsh environments and at equipment whose serial cable is connected and disconnected frequently.
Parameters as published
| Item | Value |
|---|---|
| Drivers and receivers | 2 drivers, 2 receivers |
| Data rate | 460 kbps |
| Supply | 3.3 V single supply |
| Standard | EIA-232E and CCITT V.28 |
| Charge pump capacitors | four external 0.1 microfarad |
| ESD, air gap | plus or minus 15 kV |
| ESD, contact | plus or minus 8 kV |
| Test standard | IEC 1000-4-2 on RS-232 and logic inputs and outputs |
| Technology | CMOS, low power dissipation |
| Applications listed | general purpose RS-232 links, portable instruments, handsets, diagnostic ports |
| Package | 16-lead TSSOP, 16-lead SOIC alternative |
Numbers that decide the application
At 460 kbps a bit is 2.17 microseconds, which is slow by modern standards and is the reason this part is used for diagnostic ports and legacy links rather than for data transfer. The 460 kbps rate is also what allows the charge pump to keep up: the pump has to supply the transmitter current during the mark state, and a higher data rate would need larger capacitors or a different pump arrangement.
The plus or minus 15 kV and plus or minus 8 kV figures are ESD ratings and not fault ratings. They describe a discharge event of a defined shape and energy, and they say nothing about a sustained miswire or a ground potential difference between two buildings. A port that is expected to survive the latter needs external protection as well, and the internal rating is then a second line.
The four 0.1 microfarad capacitors are part of the circuit, not a recommendation. Reducing them to save board area lowers the pump's output voltage and the transmitter swing, and the link then fails at the far end of a long cable rather than at the connector. The transmitter output has to reach plus and minus 5 V or more into a 3 kilohm load to meet the standard, and the pump with the specified capacitors is what achieves it from 3.3 V.
Selection and cross reference notes
Three fields decide the part: the number of drivers and receivers, the supply voltage and the ESD grade. A two driver two receiver part is not interchangeable with a one driver one receiver part in a socket that uses the second channel, and a 5 V part will not run from 3.3 V even though the package is identical.
The non-E member of the family has lower ESD ratings and the same pinout. On a bench they behave identically, which is why the grade field is the one that gets missed at incoming inspection and discovered at the field return.
Where it fits
General purpose RS-232 data links, portable instruments, handsets and industrial or telecom diagnostic ports. The 3.3 V supply keeps it on the same rail as a modern microcontroller, and the charge pump removes the need for a plus and minus 12 V supply that older RS-232 parts required. Buyers checking a socket replacement can start at the pin to pin cross reference page, and teams checking availability on interface parts usually use the component lead time solutions page.
Buying notes
RUZ is the 16-lead TSSOP and REEL7 is the reel; the SOIC body carries a different suffix. The E is the ESD grade and the 3232 is the two driver two receiver configuration. Because the family includes several configurations in the same body, the full code is the only complete description of what is in the reel.
Sourcing notes and next step
The questions for an RS-232 transceiver are the channel count, the supply voltage and the ESD grade. We quote the exact code and confirm the grade before shipping. Send the codes and quantities through the BOM shortage recovery page and we will answer with availability and the packaging on offer.
Request Quote — In Stock, 100% New & Original, Full Warranty