ADF4360-2BCPZ
Product Specifications
ADF4360-2BCPZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADF4360-2BCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADF4360-2BCPZ: 2 GHz integer N synthesizer with an integrated VCO
The ADF4360-2BCPZ combines an integer N synthesizer and a voltage controlled oscillator in one 24-lead LFCSP. The VCO covers 1850 MHz to 2170 MHz, and a divide by two output gives 925 MHz to 1085 MHz from the same chip. It runs from 3.0 V to 3.6 V, draws a fraction of what a discrete synthesizer and VCO pair would, and is controlled over a 3-wire serial interface.
Published values
| Parameter | Value |
|---|---|
| Output frequency | 1850 MHz to 2170 MHz |
| Divide by two output | 925 MHz to 1085 MHz |
| Center frequency | 2000 MHz |
| Supply range | 3.0 V to 3.6 V |
| Logic compatibility | 1.8 V |
| Prescaler | dual modulus 8/9, 16/17 or 32/33 |
| Output power | programmable |
| Interface | 3-wire serial |
| Lock detect | analog and digital |
| Power down | hardware and software |
| Package | 24-lead LFCSP |
The tuning range is the whole band or nothing
The VCO covers 320 MHz, from 1850 MHz to 2170 MHz, which is 16 percent of the centre frequency. A product that needs 2.4 GHz is outside it and moves to another member of the family, and a product that needs 1850 MHz to 2170 MHz in one product gets the whole range from one order code. The tuning voltage range and the loop filter decide how much of that 320 MHz is actually reached: a 1 V to 2 V tuning window covers far less than the full band.
The divide by two output is not a second VCO. It is the same oscillator halved, so its phase noise is 6 dB better than the fundamental at the same offset and its range is exactly half. Using the divided output for a 900 MHz band therefore gives a cleaner signal than running the VCO at 900 MHz would, which is why the option exists.
Integer N means the step is the comparison frequency
The output step equals the phase detector frequency, so a 200 kHz comparison gives 200 kHz steps and a 25 kHz comparison gives 25 kHz steps. There is no fractional modulator, so the spurs that appear at multiples of the comparison frequency are the dominant spectral artefact and the loop filter has to be narrow enough to remove them without making the loop too slow to settle.
With a 2000 MHz output and a 200 kHz comparison the N value is 10000, and the prescaler has to be chosen so that the N and A counters can represent it. The dual modulus 8/9, 16/17 and 32/33 options exist for that reason: a higher prescaler allows a higher N at the same comparison frequency.
Supply, logic and the 1.8 V interface
A 3.0 V to 3.6 V supply is 3.3 V nominal with 10 percent of tolerance, and the 1.8 V logic compatibility means the control pins can be driven directly from a baseband processor that has no 3.3 V interface. That removes a level shifter from the bill of materials and removes the propagation delay it would add to the register writes.
The programmable output power lets the drive level be set for the mixer or the amplifier that follows, which matters when the VCO output feeds a passive mixer directly: too much drive saturates the mixer and too little raises its noise contribution. The setting is a register value, so it can be changed per band in software.
Where a customer needs a second position on this part, component lead time solutions is the starting point, the obsolete part cross reference hub sets out the checks a substitution has to pass, and vendor consolidation is the short lead time route we quote against.
Two questions buyers ask
Does the ADF4360-2 tune to 2.4 GHz? No. Its VCO stops at 2170 MHz. The family has other members for higher bands, and the order code has to be chosen by frequency rather than by package.
What is the output step? The phase detector comparison frequency. A 200 kHz comparison gives 200 kHz steps, and the loop filter has to remove the reference spurs that the integer N architecture produces at that spacing.