ADA4932-1YCPZ
Product Specifications
ADA4932-1YCPZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The ADA4932-1YCPZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
ADA4932-1YCPZ: low power differential ADC driver with 560 MHz bandwidth
The ADA4932-1YCPZ is a single differential amplifier in a 16-lead LFCSP built to sit between a single ended or differential source and a high speed converter. It holds a 560 MHz -3 dB bandwidth at unity gain, a 2800 V/us slew rate and 9.6 mA of supply current, with an externally set gain that can be below one. The output common mode is set by a separate pin, which is what lets it drive a converter whose input range is not centred on the amplifier supply.
Published values
| Parameter | Value |
|---|---|
| -3 dB bandwidth | 560 MHz at a gain of 1 |
| 0.1 dB gain flatness | to 300 MHz |
| Slew rate | 2800 V/us, 25 to 75 percent |
| Settling time to 0.1 percent | 9 ns |
| Supply current per amplifier | 9.6 mA |
| Input offset voltage | plus or minus 0.5 mV typical |
| Voltage noise | 3.6 nV per root hertz |
| Harmonic distortion | 100 dB SFDR at 10 MHz, 90 dB at 20 MHz |
| Supply range | +3 V to plus or minus 5 V |
| Gain | externally set, values below 1 allowed |
| Output common mode | adjustable by a dedicated pin |
| Temperature range | -40 C to +105 C |
| Package | 16-lead LFCSP |
The common mode pin is the reason to use it
A converter with a 1 V internal reference wants its input centred at 0.5 V or at 2.5 V depending on the part, and that centre has nothing to do with the amplifier supply. The dedicated output common mode pin takes that voltage from a reference or from the converter itself, so the amplifier output sits where the converter expects it while the input can be referenced anywhere inside its own range. Without that pin the same job needs a level shift network that adds its own error and its own noise.
The input common mode range is shifted down by one base emitter drop, which is the price of the bipolar input stage. A single ended source that sits at ground therefore needs its own bias, and a source that sits at mid supply is comfortable.
Distortion is quoted at a frequency, not as a number
100 dB of spurious free dynamic range at 10 MHz falls to 90 dB at 20 MHz. On a 14-bit converter one code is about 0.1 mV on a 1.6 V span and 100 dB is 16 bits of headroom, so at 10 MHz the driver is not the limit and at 20 MHz it is still four bits above a 12-bit converter. The frequency at which the driver stops being transparent is the number a receiver chain needs, and it is not the same 100 dB for every band.
The 3.6 nV per root hertz noise over a 40 MHz band is 22.8 uV, which is 0.23 of a 12-bit code on a 2 V span and 0.9 of a 14-bit code. A wider band therefore costs resolution even though the distortion figure looks untouched.
Power, heat and the 16-lead body
9.6 mA at 5 V is 48 mW, and the same current at 3 V is 29 mW. The part is specified to +105 C rather than to +125 C, which is the constraint a closed enclosure has to be checked against: a 16-lead LFCSP with no airflow reaches its limit quickly when it sits next to a converter that draws ten times its power.
A gain below one is allowed, which makes the part usable as an attenuator in front of a converter that has a wider input range than the source. The feedback network sets the gain and also sets the input impedance, so the resistor values are a noise and loading decision as much as a gain decision.
When an order code in this family cannot be found, the ADC and DAC cross reference lists what else does the same job, the amplifier cross reference covers what to check before a part is dropped into an existing board, and how to verify a drop in replacement is the route we take on a live shortage.
Two questions buyers ask
Can the ADA4932-1YCPZ replace an AD8132? It is the next generation of that part and the pinout is compatible in the 16-lead body, but the noise, the bandwidth and the supply current all differ. It is a socket fit that has to be re-qualified on the board, not a drop in that can be released without a measurement.
What sets the output common mode voltage? The VOCM pin. It is driven from a reference or from the converter and is independent of the input common mode, so the amplifier can take a ground referenced source and deliver a mid rail centred output.