AD8639ARZ
Product Specifications
AD8639ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8639ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8639ARZ: dual 16 volt auto-zero amplifier with a 9 microvolt offset
The AD8639ARZ is the two channel member of the AD8638/AD8639 auto-zero family in an 8-lead SOIC_N body. It runs from 5 V to 16 V single supply or plus or minus 2.5 V to plus or minus 8 V dual, holds 9 uV maximum offset and 0.06 uV/C maximum drift, and delivers 1.5 MHz with 60 nV/root Hz of noise, which is the combination for a 12 V or 15 V industrial front end.
Published values
| Parameter | Value |
|---|---|
| Offset voltage | 3 uV typical, 9 uV maximum |
| Offset voltage drift, all packages | 0.01 uV/C typical, 0.06 uV/C maximum |
| Offset voltage drift, SOT-23 | 0.04 uV/C typical, 0.15 uV/C maximum |
| Input bias current | 1.5 pA typical, 40 pA maximum at 5 V; 75 pA maximum at 16 V |
| Input offset current | 7 pA typical, 40 pA maximum |
| Supply current per amplifier | 1.0 mA typical, 1.3 mA maximum at 5 V; 1.5 mA maximum at 16 V |
| Gain bandwidth | 1.35 MHz at 5 V, 1.5 MHz at 16 V |
| Slew rate | 2.5 V/us at 5 V, 2.0 V/us at 16 V |
| Voltage noise density | 60 nV/root Hz at 1 kHz, 1.2 uV p-p over 0.1 to 10 Hz |
| CMRR | 118 dB typical, 133 dB maximum at 5 V |
| Large signal gain | 120 dB minimum at 5 V |
| Input voltage range | -0.1 V to +3 V on a 5 V supply; -0.1 V to +14 V on a 16 V supply |
| Output swing | 4.97 V minimum high into 10 k at 5 V |
| Settling to 0.1 percent | 3 us on a 2 V step at 5 V, 4 us on a 4 V step at 16 V |
| Overload recovery | 50 us |
The input window is the catch
The output is rail to rail but the input is not. On a 5 V supply the common mode range is -0.1 V to +3 V, and on 16 V it is -0.1 V to +14 V, so a signal that swings within 2 V of the positive rail is outside the part. In a 12 V industrial system with a 0 V to 10 V signal, 10 V against a 12 V rail is 2 V below the rail and still inside the window, but a 0 V to 12 V signal is not. Check the top end of the signal against the window before anything else.
The bottom end is better behaved: -0.1 V below ground on a single supply means a true zero volt input sits inside the range, which is what a grounded thermocouple or a shunt at 0 V needs.
Auto-zero offset at 16 V
9 uV maximum offset at 16 V is one code of a 16-bit converter on a 10 V span, and 0.06 uV/C over 165 C is 10 uV, so the channel is about two codes over the whole temperature range. That is 300 times better than a 1 uV/C bipolar part would do and it is why this family is used on 4 mA to 20 mA input cards that are calibrated once.
The price is noise: 60 nV/root Hz against 3 nV for a good low noise amplifier. On a 10 kHz band that is 6 uV rms, which is 4 codes at 16 bits, so the noise, not the offset, becomes the limit on a fast channel. Set the input filter to the bandwidth the application actually needs before choosing the amplifier.
Power and package
Two amplifiers at 1.5 mA maximum on 16 V are 3 mA and 48 mW, which is 420 mAh over a year and far too much for a battery instrument. On a loop powered card the whole budget is 4 mA, so 3 mA leaves 1 mA for the reference, the converter and the sensor. Where that does not fit, the AD8628 family runs at 1.1 mA on 5 V and the AD8639 stays on the 12 V boards where the current is available.
The 8-lead SOIC_N has a thermal resistance of 158 C/W, so 48 mW raises the junction by about 7.6 C above the board, which is small against the 125 C limit. At 16 V the part is limited by the supply current, not by the package.
Two pages worth reading before a purchase order goes out are defense grade components and how to verify a drop in replacement; the first lists what else fits the socket, the second is the test sequence for a drop in, and the amplifier cross reference covers the case where the shortage is already on the line.
Two questions buyers ask
Is the AD8639ARZ rail to rail on the input? No. The output is rail to rail; the input common mode range is -0.1 V to +14 V on a 16 V supply. A signal that goes to the positive rail is outside the part.
What is the difference between the AD8639 and the AD8629? Supply range and noise: 16 V and 60 nV/root Hz against 5.5 V and 22 nV/root Hz. The offset and drift are in the same class, so the supply the board already has decides which one fits.