AD8617ARMZ
Product Specifications
AD8617ARMZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8617ARMZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8617: Two Amplifiers at 50 Microamps Each That Still Swing Rail to Rail
The AD8617 is the dual member of the AD8613, AD8617 and AD8619 family: single, dual and quad micropower CMOS amplifiers with rail to rail inputs and outputs, 2.2 mV maximum offset voltage, 1 pA maximum input bias current, 22 nV per root Hz of voltage noise and a supply current of 50 microamps per amplifier maximum over temperature. It operates from 1.8 V to 5.5 V single supply, or plus or minus 0.9 V to plus or minus 2.5 V dual, and comes in an 8-lead MSOP, SOIC or LFCSP. The AD8617W is the automotive qualified version of the same part in the same packages.
The current budget is what separates it from a general purpose CMOS part
A 1 pA bias current is not a marketing number in a loop powered instrument: it is the difference between a 4 mA to 20 mA transmitter that can stay inside its 4 mA budget and one that cannot. Fifty microamps per amplifier leaves room for a reference, a converter and the loop stage in a device that must draw less than 3.5 mA total. The combination of a picoamp input and a low supply current is what makes a high impedance sensor usable without a buffer that costs more current than the sensor itself. Where the source impedance is low the bias current hardly matters, and a faster amplifier with more current is the better choice, so this part earns its place on the input side of a high impedance node rather than everywhere on the board.
Values at a glance
| Parameter | Value | Note |
|---|---|---|
| Channels | 2 | AD8613 is single, AD8619 is quad, same specifications |
| Offset voltage | 2.2 mV maximum | No external trim needed for a 12-bit system |
| Input bias current | 1 pA maximum | The reason it suits high impedance sensors |
| Supply current | 50 microamps per amplifier maximum | Over the full temperature range, not at 25 C only |
| Supply voltage | 1.8 V to 5.5 V single | Plus or minus 0.9 V to plus or minus 2.5 V dual |
| Input and output | Rail to rail on both | No phase reversal when the input exceeds the rails |
| Noise | 22 nV per root Hz | Low enough for a 16-bit converter front end at low frequency |
| Packages | 8-lead MSOP, SOIC, LFCSP | Automotive qualified version is the AD8617W |
Driving a converter input without a second amplifier
An ADC driver normally needs an amplifier with enough bandwidth to settle the sampling transient and enough output current to charge the hold capacitor. At 50 microamps the AD8617 is not that amplifier for a fast converter, but for a sigma delta converter running at tens of samples per second it is more than enough, and the rail to rail output means the full converter range is available without a level shift. The same part drives a DAC output stage or a level shifter where the load is a few tens of kilohms and the demand is a defined output with a low offset. Where the part is misapplied is on a fast successive approximation converter, where the settling requirement is measured in hundreds of nanoseconds and the micropower output stage cannot meet it.
Phase reversal and the fault that costs a board spin
No phase reversal means that when an input is driven above the positive rail or below the negative rail, within the absolute maximum ratings, the output does not invert. On a single supply amplifier in a battery instrument this matters because the input can be driven above the supply during a hot plug event, and an amplifier that reverses turns a small overvoltage into a large and possibly destructive output. The part is unity gain stable, so it can be used as a buffer without a compensation capacitor, and the low input capacitance keeps it stable behind a resistive divider. Both properties are worth checking in a substitute, since a pin compatible amplifier without them will pass a functional test and fail in the field on an ESD event.
Procurement and second source
The automotive qualified version shares the package with the industrial part, so the difference is screening and documentation rather than silicon, and the order code has to be read carefully. The amplifier cross reference lists the micropower parts that share the pinout, medical device components covers the sourcing route for instrument grade amplifiers with traceable lots, and ADI part second source sets out what to check before a different vendor is allowed into a qualified position.