AD8607ARZ
Product Specifications
AD8607ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8607ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD8607ARZ: dual micropower precision amplifier in SOIC-8
The AD8607ARZ is the 8-lead SOIC_N version of the 40 uA two channel precision amplifier, with a 50 uV maximum offset, 1 pA bias current and 400 kHz of bandwidth from 1.8 V to 5 V. It is the package for a long life instrument where the footprint is already SOIC and the board has to keep working for a decade on the same board.
Published values
| Parameter | Value |
|---|---|
| Offset voltage | 12 uV typical, 50 uV maximum |
| Offset voltage drift | 1 uV/C typical, 4.5 uV/C maximum |
| Input bias current | 0.2 pA typical, 1 pA maximum |
| Supply current, both channels | 80 uA typical, 100 uA maximum |
| Gain bandwidth | 400 kHz at 5 V |
| Slew rate | 0.1 V/us |
| Voltage noise density | 25 nV/root Hz at 1 kHz |
| Settling to 0.1% | 23 us on a 2 V step |
| CMRR and PSRR | 80 dB minimum |
| Thermal resistance, SOIC-8 | 120 C/W junction to ambient |
| Supply range | 1.8 V to 5 V single supply |
| Input range | 0.3 V beyond both rails |
Drift over the range, not drift at 25 C
Fifty microvolts at room temperature is the headline. The number that decides whether an uncalibrated channel holds its accuracy is 4.5 uV/C maximum, which over a 100 C excursion inside a sealed enclosure is 450 uV, nine times the room temperature offset. A channel that only has to be accurate at 25 C can use the 50 uV figure; a channel that has to be accurate at 85 C cannot, and either needs a calibration at the operating temperature or a chopper part with drift in the hundredths of a microvolt per degree.
What a second source has to match in this socket
An SOIC-8 dual in a battery instrument is usually surrounded by fixed components: the feedback network, the input filter and the load capacitance. A substitute therefore has to match the 1 pA bias current, the 400 kHz bandwidth and the 0.1 V/us slew rate closely enough that the filter response does not move, and it has to stay stable with whatever capacitance is already on the output. Faster substitutes are the ones that oscillate in this position, not slower ones.
Ratiometric measurements and the supply
With 80 dB minimum of supply rejection, a 100 mV change on the rail appears as 10 uV at the input, which is a fifth of the offset. In a product that runs from an unregulated battery voltage, that error moves with the battery, so either regulate the analog rail or reference the converter to the same rail so the two errors cancel in the ratio.
Long life and obsolescence
This family has been in production long enough that a board change is not needed to keep using it, which is the practical argument for a part with modest specifications in an industrial product. Where a bill of materials has to survive ten years, keeping a second source position on the same die in a different package is the cheapest insurance available.
Sourcing notes for this family: component obsolescence management holds the cross references, the obsolete part cross reference hub is the pre substitution check, and the amplifier cross reference is what we use when the part on the drawing is not on the shelf.
Two questions buyers ask
Is the AD8607ARZ electrically identical to the MSOP version? Yes. The same die, so offset, drift, noise and bandwidth are the same; only the package and the thermal resistance differ.
How does the drift compare with a zero-drift part? 4.5 uV/C maximum here against 0.04 uV/C maximum on a chopper part. Over 100 C that is 450 uV against 4 uV, which is the reason both families exist.