Contact Us

AD8542ARZ-REEL

Brand: Analog Devices
Analog Devices AD8542ARZ-REEL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8542ARZ-REEL — Analog & Mixed-Signal ICs | Superb Automation

AD8542ARZ-REEL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8542ARZ-REEL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD8542ARZ-REEL: a dual rail to rail amplifier on 45 microamps per side

What this order code is

AD8542ARZ-REEL is the dual member of the AD8541, AD8542 and AD8544 family, single, dual and quad rail to rail input and output amplifiers that run from 2.7 V to 5.5 V on 45 microamps per amplifier. The bandwidth is 1 MHz, the input bias current is 4 picoamps, there is no phase reversal on overdrive and the part is unity gain stable. ARZ is the 8-lead SOIC body and REEL is the reel.

The family is AEC-Q100 qualified for automotive applications, which is stated as a family feature rather than as an order code option, and it is specified from minus 40 to plus 125 degrees C. The vendor points at integrators, photodiode amplifiers, piezoelectric sensors and other high source impedance circuits as the applications that benefit from the low bias current, and at active filters and gain stages as the ones that benefit from the 1 MHz bandwidth held at low supply voltages.

Parameters as published

ItemValue
Supply range2.7 V to 5.5 V
Supply current45 microamps per amplifier
Gain bandwidth1 MHz
Input bias current4 picoamps
Input and output rangerail to rail
Phase reversalnone on overdrive
Stabilityunity gain stable
Temperature rangeminus 40 C to plus 125 C
QualificationAEC-Q100 for automotive applications
Package8-lead SOIC, 8-lead MSOP and 8-lead TSSOP alternatives

Numbers that decide the application

Forty five microamps per amplifier is 90 microamps for the dual and 788.4 mAh across a year, which is a third of what a 750 microamp part costs and the reason this family exists. The price is bandwidth: 1 MHz at unity gain falls to 100 kHz at a gain of 10 and 10 kHz at a gain of 100, so a filter stage built around this part has to be chosen for the gain it will run at rather than for the headline figure.

Bias current of 4 picoamps across a 10 megohm source is 40 microvolts, which is small enough that a high impedance sensor can be connected directly, and that is the second reason the part exists. A CMOS input with nanoamp bias in the same socket would produce twenty times that error. The rail to rail input and output is what allows a signal to use the whole 2.7 V rail, which matters in a battery product where every hundred millivolts of headroom counts.

There is no offset figure on the front page of the product summary, which is itself informative: this is an ac and impedance part rather than a dc precision one, and a circuit that needs a defined offset has to go to the data sheet table rather than to the feature list. The AEC-Q100 qualification is the field that makes it usable in an automotive module.

Selection and cross reference notes

The comparison against the 8 MHz CMOS duals is a current against bandwidth trade: 45 microamps at 1 MHz against 750 microamps at 8 MHz is a factor of sixteen in current for a factor of eight in bandwidth, so the slower part is the efficient one when the bandwidth is not needed. The second comparison is bias current, where both are in the picoamp range and either will serve a high impedance source.

Package options inside the family are the third field. The dual comes in SOIC, MSOP and TSSOP, and the three are different land patterns even though the die is the same. The AEC-Q100 qualification is a family statement, so a line that requires it should still confirm the specific order code against the qualification list rather than relying on the family page.

Where it fits

ASIC input and output amplifiers, sensor interfaces, piezoelectric transducer amplifiers, medical instrumentation, mobile communications, audio outputs, portable systems and active filters are the applications named on the product page. The piezoelectric and sensor interface cases are where the 4 picoamp bias and the rail to rail swing work together. Buyers who need the family view can start at the analog and mixed signal category page, and teams working on portable medical equipment usually go through the medical device components page.

Buying notes

ARZ is the 8-lead SOIC body and REEL is the reel; the MSOP and TSSOP bodies and the single and quad members all carry different codes. Because the family name is the same across three packages and three channel counts, the full order string is what identifies the part, and a quotation that keeps only the family name can deliver a footprint that does not fit.

Sourcing notes and next step

The questions that come back are the package the board can take, the bandwidth at the real gain and whether the automotive qualification is required. We quote the AD8542 codes against a bill of materials and confirm the body and qualification against the line. Send the codes, quantities and required date through the BOM shortage recovery page and we will answer with availability and the cross reference where the exact body is short.

Request Quote — In Stock, 100% New & Original, Full Warranty