Contact Us

AD8418WBRZ

Brand: Analog Devices
Analog Devices AD8418WBRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD8418WBRZ — Analog & Mixed-Signal ICs | Superb Automation

AD8418WBRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD8418WBRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD8418WBRZ: 400 uV of Offset at a Gain of 20 Is 8 mV at the Output

The AD8418 is a bidirectional, zero drift current shunt amplifier with a fixed gain of 20, a common mode range from -2 V to +70 V, and a maximum input offset of 400 uV over the full temperature range. Typical drift is 0.1 uV per degree Celsius, which over 165 degrees is 16.5 uV, a small fraction of the 400 uV limit. It runs from 2.7 V to 5.5 V, includes electromagnetic interference filters on the inputs, and is qualified for automotive use. The part is normally chosen for high side sensing in motor and solenoid drives, where the common mode moves with pulse width modulation and the measurement has to survive that movement.

The offset in output terms

At a gain of 20, the 400 uV maximum input offset becomes 8 mV at the output. On a 1 milliohm shunt at 10 A the sense voltage is 10 mV, so the output is 200 mV and the offset is 4 percent of the reading. On a 0.1 milliohm shunt at the same current the sense voltage is 1 mV and the offset is 40 percent. That is the whole argument for shunt value selection: the amplifier's offset is fixed, so the shunt has to be large enough that the offset is a small part of the signal, and the power dissipated in the shunt is what limits how large it can be. A 1 milliohm shunt at 10 A dissipates 100 mW; a 0.1 milliohm shunt dissipates 10 mW and buys nothing but a worse reading.

Pulse width modulation and the common mode

In a motor drive the common mode is a square wave between the rail and ground, with edges of tens of nanoseconds. The amplifier specifies common mode rejection of 86 dB from dc to 10 kHz, and the data sheet describes circuitry that keeps the output accurate with pulse width modulated common mode inputs. A rejection of 86 dB at a 48 V common mode step leaves 2.5 mV of input referred error, which at a gain of 20 is 50 mV at the output, so the settling of the common mode rejection, not its dc value, is what has to be checked when the shunt sits on a switching node.

ParameterValueWhat it decides
Gain20 V per V, fixedSets the output for a given shunt and current
Gain error0.15 percent maximumSmall against the offset term at low currents
Offset, maximum400 uV over temperature8 mV at the output, 4 percent on 10 mV
Offset drift, typical0.1 uV per degree C16.5 uV over 165 degrees
Common mode operating-2 V to +70 VAbove a 48 V rail with margin for ringing
Common mode survival-4 V to +85 VTransient headroom without damage
Common mode rejection86 dB, dc to 10 kHz2.5 mV of error on a 48 V step
Supply2.7 V to 5.5 VRuns from the same rail as the controller
Temperature range-40 C to +125 CAutomotive qualified
Input filtersElectromagnetic interferenceKeeps switching edges out of the input pair
Reference pinsTwo, VREF1 and VREF2Bidirectional output offset and span
Package8-lead MSOP and SOICTwo bodies, same die

Two reference pins and what they do

The output sits between VREF1 and VREF2, so the pair defines both the offset and the span: tying both to mid supply gives a bidirectional output centred on the rail, tying one to the rail and the other to ground makes the output unidirectional, and offsetting the pair by different amounts moves the zero current point. The divider that sets those two references carries its own tolerance into the reading, so a 1 percent pair on a 5 V rail contributes 50 mV at the reference and the same at the output, which is six times the amplifier's own offset contribution. The reference network, not the amplifier, is usually the accuracy limit.

Where this sits against the rest of the family

The same family includes a gain of 50 part, a gain of 20 high accuracy part and a gain of 20 high speed part, so the three numbers to compare across them are gain, bandwidth and offset. A gain of 50 on the same shunt gives more output per amp but saturates earlier on a high current event, and the high speed member trades offset for bandwidth. The order code fixes the gain and the qualification. Current availability is handled through power management cross reference, and the broader question of what a motor drive needs beside the sense amplifier is set out in medical device components. Where a board is being reworked around a short part, the checks are in how to verify a drop in replacement.