AD826ARZ
Product Specifications
AD826ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD826ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD826ARZ: Two 50 MHz Amplifiers on 7.5 mA Each
The AD826ARZ is the dual member of the 50 MHz family, and the specification that defines it is the combination of 350 V per microsecond of slew rate with 7.5 mA maximum of supply current per amplifier. Each output delivers 50 mA minimum and drives an unlimited capacitive load, so a single package can drive two cables. Supply is specified at plus and minus 5 V, plus and minus 15 V and at a single 5 V rail, and on the single 5 V rail the part still reaches 25 MHz. On plus and minus 5 V it swings 2.0 V peak to peak into a 150 ohm load, which is enough for a video or instrumentation signal into a terminated cable. Offset is 2 mV maximum and settling to 0.01 percent takes 70 ns.
Published values
| Parameter | Value |
|---|---|
| Configuration | Dual |
| Unity gain bandwidth | 50 MHz |
| Bandwidth at single 5 V | 25 MHz |
| Slew rate | 350 V per microsecond |
| Supply current | 7.5 mA maximum per amplifier |
| Output current | 50 mA minimum per amplifier |
| Capacitive load | Unlimited |
| Output swing | 2.0 V peak to peak into 150 ohm at plus and minus 5 V |
| Differential gain and phase | 0.07 percent and 0.11 degrees |
| Settling time | 70 ns to 0.01 percent |
Two channels, one package, one thermal budget
At 7.5 mA per amplifier and a 15 V rail each half dissipates about 110 mW, so an 8-lead package carrying both channels is handling more than 200 mW before any load current. That number, not the bandwidth, decides the ambient limit on a densely packed board. The usual failure pattern is a two channel video driver that works on the bench and drifts on the production board because the package sits next to a regulator and the offset moves with temperature. Spreading the copper under the package and keeping the two outputs away from the supply pins costs nothing at board time and removes the problem.
Where the two amplifiers in one body help and where they hurt
Driving two cables from one package halves the part count and keeps channel timing matched, because both amplifiers share one die and therefore one temperature. The cost is supply coupling between the channels: when one output drives a capacitive load the current step appears on the shared supply pins and couples into the second channel through the supply rejection, which falls with frequency. Local decoupling at the package, one capacitor per supply pin, is what keeps the separation at the data sheet figure. Sharing a single decoupling capacitor between two packages is the usual shortcut that turns a two channel amplifier into a two channel oscillator.
Single 5 V operation and what it costs
The part is specified at a single 5 V rail and reaches 25 MHz there, half the dual supply figure, which is the honest number for a 5 V signal chain. What also changes is the output swing: with a 2 V peak to peak swing into 150 ohm at plus and minus 5 V, the single 5 V case has to be scaled to the reduced headroom. Any board moving from dual supplies to a single rail has to recheck the gain and the termination, because the clipping point moves and the distortion rises before the output actually clips.
Alternates and the body question
The dual 8-lead pinout is standard, so a substitution within the family is a part change rather than a board change, but the bandwidth and the supply current vary across the family and those two numbers decide whether an existing thermal and decoupling arrangement still works. Where the exact part is short, the amplifier cross reference is the place to start, because it groups candidates by bandwidth, output current and body rather than by part number. The amplifier cross reference page lists the dual high speed options, the pin to pin cross reference page shows which bodies swap without a board change, and the drop in replacement verification page covers the tests that have to pass before a substitute ships.