AD8129ARZ-REEL7
Product Specifications
AD8129ARZ-REEL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD8129ARZ-REEL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD8129ARZ-REEL7: 94 dB of CMRR is 210 microvolts of error across a 10.5 V common mode
The AD8129ARZ-REEL7 is a differential to single ended amplifier built to receive high speed signals that have travelled over twisted pair. Analog Devices positions it against the AD8131 and AD8132 drivers, and the pair is used for analog video, digital video and high speed data links. The ARZ body is the 8 lead SOIC. The part is stable at a fixed gain of 10, takes a 1 megohm differential input, accepts a common mode range of plus or minus 10.5 V, and runs from a single 4.5 V rail up to plus or minus 12.6 V with a power down pin.
Its sibling AD8130 is the same function at a gain of 1 with 270 MHz and 12.5 nV per root hertz. The two are often quoted against each other by buyers who treat them as interchangeable, and the difference in gain and noise is the reason they are not.
What the vendor page states
| Parameter | Value |
|---|---|
| Function | Differential to single ended receiver amplifier |
| Bandwidth | 200 MHz at gain 10 |
| Slew rate | 1060 V per microsecond at gain 10 |
| Common mode rejection | 94 dB minimum dc to 100 kHz, 80 dB minimum at 2 MHz, 70 dB at 10 MHz |
| Input impedance | 1 megohm differential |
| Input noise | 4.5 nV per root hertz |
| Input common mode range | plus or minus 10.5 V |
| Distortion | minus 74 dBc worst harmonic at 5 MHz, 1 V peak to peak |
| Supply | 4.5 V single to plus or minus 12.6 V |
| Gain setting | Fixed at 10, no external components needed for the gain of 1 sibling |
| Power down | Provided |
What the rejection figures mean in microvolts
A rejection ratio of 94 dB is 50,119 to 1. Put 10.5 V of common mode on the input and the error referred to the input is 210 microvolts. At 2 MHz the 80 dB figure is 10,000 to 1 and the same 10.5 V becomes 1,050 microvolts, and at 10 MHz the 70 dB figure of 3,162 to 1 becomes 3,320 microvolts. That progression is the practical limit of a twisted pair receiver: the rejection that looks enormous at dc has fallen by a factor of 16 by 10 MHz, and the interference a cable picks up is rarely at dc.
The 4.5 nV per root hertz input noise integrates to 14.2 microvolts rms over a 10 MHz bandwidth and 45 microvolts over 100 MHz, so the wide bandwidth and the low noise cannot both be spent at once. The worst harmonic at 1 V peak to peak is minus 74 dBc, which is 200 microvolts, a figure larger than the integrated noise over 10 MHz. Gain bandwidth is 2 GHz, and the full power bandwidth for a 2 V peak to peak swing works out at 337 MHz from the 1060 V per microsecond slew rate, so the small signal bandwidth on the first page is not available at full swing.
Questions buyers ask before ordering
Can the AD8130 be used in place of the AD8129? Not without changing the system. The AD8130 runs at a gain of 1 with 270 MHz and 12.5 nV per root hertz. Substituting it changes both the gain of the stage and the noise floor, and a board built for a gain of 10 will lose 20 dB of signal.
Does the part need external gain resistors? No, the gain is fixed at 10. The AD8130 needs no external components for its gain of 1, which is why the two are often confused in a bill of materials.
What supply should be quoted with it? Anywhere from 4.5 V single supply to plus or minus 12.6 V. The input common mode range of plus or minus 10.5 V is the constraint that usually decides the rail in a receiver that sits behind a cable with a large ground offset.
How this part is supplied
The device is carried within the Analog Devices analog and mixed signal range, and high speed amplifiers of this class are grouped in the amplifier cross reference by bandwidth, gain and package so that a shortage can be answered with a real alternative rather than a guess. When a build is short and the schedule cannot move, the BOM shortage recovery route checks the whole line, because a receiver amplifier is rarely the only part on the board with a long lead time.
Request Quote — In Stock, 100% New & Original, Full Warranty