AD7657BSTZ-1
Product Specifications
AD7657BSTZ-1
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7657BSTZ-1 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7657BSTZ-1: Six Channels at 250 kSPS for 140 mW, With Three Separate Convert Start Pins
The AD7657 is the 14 bit member of a three part family of six channel, simultaneously sampling, bipolar converters with a 250 kSPS throughput rate, pin and software selectable input ranges of plus and minus 10 V and plus and minus 5 V, an on chip reference and reference buffers, and a power dissipation of 140 mW at 250 kSPS. The six channels are organised as three pairs, each with its own convert start pin, so three groups can be triggered independently and the two channels inside a group sample together. Signal to noise ratio is 86.5 dB at 50 kHz, and standby power is 100 uW maximum.
Three convert start pins, three independent triggers
With one convert start per pair, a motor controller can trigger the two current channels on one pin at the top of the pulse width modulation period and the two voltage channels on another pin at a different point in the cycle. That flexibility is what allows the sampling instant to be placed relative to the switching edges, which is where the current ripple is smallest and the measurement is most useful. A single convert start for all six channels forces every measurement to the same instant and loses that freedom.
14 bits on a 20 V span
On the plus and minus 10 V range a 14 bit converter has a code size of 1.22 mV, against 305 uV for a 16 bit part on the same span. For a motor current measured across a shunt with a 50 mV full scale, the 14 bit code is 6 uV after the amplifier, which is adequate; for a strain gauge with a 2 mV full scale signal it is not. The family exists in 12, 14 and 16 bit members with the same pinout, so the resolution can be chosen against the signal rather than against the board.
| Parameter | Value | What it decides |
|---|---|---|
| Resolution | 14 bit | 1.22 mV per code on a 20 V span |
| Channels | Six, simultaneous in three pairs | Three independent convert start pins |
| Throughput | 250 kSPS | 4 us per conversion |
| Input ranges | Plus and minus 10 V, plus and minus 5 V | Pin or register selectable |
| Signal to noise | 86.5 dB at 50 kHz | 14 effective bits at that frequency |
| Reference | On chip, with buffers | No external reference or buffer |
| Power at 250 kSPS | 140 mW | 0.56 mW per channel at full rate |
| Standby power | 100 uW maximum | Three decades below active |
| Supplies | 5 V analog, separate interface supply | Talks to a 3.3 V processor |
| Interface | Parallel, serial, daisy chain | Daisy chain saves isolators |
| Process | Industrial CMOS, 33 V capable | Bipolar inputs without level shifting |
| Package | 64-lead LQFP | Six bipolar channels in one body |
| Temperature range | Industrial and extended grades | The order code carries the grade |
Bipolar inputs without a level shift
A plus and minus 10 V input on a single 5 V supply means the converter has an internal level shift and a high voltage front end, which is what the industrial CMOS process provides. Without it, a plus and minus 10 V signal needs an amplifier with plus and minus 15 V rails in front of every channel, and six channels of that is a larger board than the converter. The trade is the 140 mW dissipation and the 64-lead package.
Daisy chain and isolation
In a system with a floating measurement section, the serial interface can be arranged as a daisy chain so that several converters share one set of isolators. Three converters in a chain present one clock, one data in and one data out to the isolated side instead of nine lines. That is a cost decision as much as an electrical one, because the isolators and their supplies are usually the expensive part of the barrier.
Buying a six channel bipolar converter
The comparison across candidates is resolution, input range, channel grouping and power, and the order code fixes the resolution and the grade within one pinout. A part from the same family with a different resolution is a valid substitution only if the system's accuracy requirement allows it. Availability is tracked through ADC DAC cross reference, and the wider question of a motor drive bill of materials is set out in power management cross reference. Where the original code is short, the options are in component lead time solutions.