AD7403-8BRIZ-RL7
Product Specifications
AD7403-8BRIZ-RL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7403-8BRIZ-RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7403-8BRIZ-RL7: 88 dB of Signal to Noise and 1250 V of Working Isolation
The AD7403 is the third generation isolated sigma delta modulator in this family, and the minus 8 grade on this page is the version with a 2 uV per degree C typical offset drift and a minus 40 to plus 105 degrees C range, where the standard grade is 1.6 uV per degree C and minus 40 to plus 125 degrees C. It accepts an external clock from 5 MHz to 20 MHz, has a differential input with a 320 mV full scale and a 250 mV nominal range, and delivers 16 bits with no missing codes, 88 dB of signal to noise ratio and 14.2 effective bits at 78.1 kSPS. Isolation is 5000 V rms for one minute under UL 1577 with a working voltage of 1250 V peak under VDE 0884-10, common mode transient immunity is better than 25 kV per microsecond, and the package is a wide body SOIC.
88 dB is 14.2 effective bits, and the two are the same statement
A signal to noise ratio of 88 dB over the conversion bandwidth corresponds to (88 minus 1.76) divided by 6.02, which is 14.3, and the data sheet states 14.2 effective bits. That consistency is worth noting because it means the 16-bit word is filled to within 1.8 bits, and the missing bits are the noise floor rather than a missing code. Converted to voltage, 320 mV divided by two to the power 14.2 is about 17 uV of rms noise, so a current reading on a 10 milliohm shunt has 1.7 mA of noise, and averaging over a decade of bandwidth buys another 10 dB, which is 1.7 bits.
1250 V peak of working voltage is the highest in the family
The working voltage of 1250 V peak under VDE 0884-10 is what puts this part on a 690 V or an 800 V drive bus, and it is roughly twice the 645 V peak of the earliest member of the family. The 5000 V rms one minute withstand figure is common to all three generations, so a specification written around the withstand number does not distinguish them. The creepage of the wide body package and the 1250 V rating are what allow the higher bus voltage, and the pollution degree and the material group of the board still have to be right for the certification to hold.
| Parameter | Value | What it decides |
|---|---|---|
| Clock | External, 5 MHz to 20 MHz | Host controlled sampling and filtering |
| Input range | 250 mV nominal, 320 mV full scale | 4.88 uV per code at 16 bits |
| Resolution | 16 bits, no missing codes | 0.49 mA per code on a 10 milliohm shunt |
| Signal to noise ratio | 88 dB at 78.1 kSPS | 14.2 effective bits, 17 uV of rms noise |
| Effective bits | 14.2 typical | The word is 1.8 bits wider than the noise |
| Offset drift, minus 8 grade | 2 uV per degree C typical | 290 uV over 145 degrees, 59 codes |
| Offset drift, standard grade | 1.6 uV per degree C typical | Better drift, but a 125 degree ceiling |
| Isolation, UL | 5000 V rms for one minute | Withstand test, common to the whole family |
| Isolation, working | 1250 V peak under VDE 0884-10 | The highest in the family, for an 800 V bus |
| Transient immunity | Better than 25 kV per microsecond | A switching node edge does not corrupt a sample |
| Secondary supply | 5 V or 3 V | Direct connection to a 3.3 V host |
| Package | Wide body SOIC | Creepage for the working voltage |
| Temperature range | Minus 40 to plus 105 degrees C | The minus 8 grade, not the 125 degree one |
Choosing the grade is choosing the drift ceiling
The two grades differ by 0.4 uV per degree C of typical offset drift and by 20 degrees of temperature range, and the second difference is the one that decides most boards. A cabinet at 105 degrees C internal ambient rules out the standard grade regardless of its better drift, because the part is not specified at that temperature. Where both fit, the drift difference over 105 degrees is 42 uV, which is nine codes, and that is inside the calibration uncertainty of most current loops. The grade choice is therefore a thermal decision, and the drift number is secondary.
Why the working voltage matters more than the test voltage
The one minute withstand test at 5000 V rms is applied to a sample and proves the insulation does not fail at that stress. The working voltage of 1250 V peak is what the insulation is rated to carry continuously for the life of the product, and the two differ by a factor of about three because continuous stress ages the insulation. A board that selects a part on the withstand number alone and runs it at 1500 V continuously is using the part outside its rating even though every sample passes the test. The working voltage, the creepage and the expected life at temperature are the three numbers a safety file needs.
Filter choice sets the bandwidth and the delay
The 88 dB figure is quoted at 78.1 kSPS, which is a 20 MHz clock with a 256 decimation ratio. Running the clock at 5 MHz with the same ratio gives 19.5 kSPS, a narrower bandwidth and a better noise figure, at the cost of four times the delay. In a current loop the delay is part of the phase margin, so a slower filter buys resolution and spends stability. The filter order matters too: a third order sinc filter has a wider flat band and a longer impulse response than a second order one at the same decimation, and the choice has to be made with the loop compensation in view.
Sourcing a high voltage isolated modulator
The order code carries the grade and therefore the temperature ceiling and the drift, so a substitute with the same part number prefix and a different grade suffix is a different component for a safety file. Parts that can be compared on isolation rating, input range and bandwidth are listed in ADC DAC cross reference, the power stage side of the same bill of materials is covered in power management cross reference, and the audit that keeps a certified part certified through purchasing is described in supplier quality audit.