Contact Us

AD7401AYRWZ-RL

Brand: Analog Devices
Analog Devices AD7401AYRWZ-RL is a analog & mixed-signal component designed for Precision Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7401AYRWZ-RL — Analog & Mixed-Signal ICs | Superb Automation

AD7401AYRWZ-RL

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7401AYRWZ-RL from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

AD7401AYRWZ-RL: five kilovolts of barrier in front of a second order modulator

The AD7401 is an isolated sigma delta modulator, a second order converter that turns an analog input into a one bit data stream with the isolation built onto the die, in a 16-lead wide body SOIC. The input is differential and rated at plus or minus 200 mV, with a plus or minus 320 mV full scale, and the part runs from a 5 V supply while the serial side can run at 5 V or 3 V. The external clock sets the data rate, up to 20 MHz, and the density of ones in the output stream carries the input value, which is why a digital filter on the other side of the barrier is required before the number means anything. An internal clock version, the AD7400, carries the same modulator.

What the vendor page and datasheet state

ParameterValue
Typesecond order sigma delta modulator, 1 bit output
Clockexternal, 20 MHz maximum
Inputdifferential, plus or minus 200 mV nominal, plus or minus 320 mV full scale
Resolution16 bits with no missing codes
Linearityplus or minus 2 LSB INL typical at 16 bits
Offset drift3.5 microvolts per degree C maximum
Isolation5000 V rms for one minute per UL 1577, VIORM 891 V peak per VDE 0884-10
Supply and current5 V, 20 mA maximum
Temperatureminus 40 to plus 105 C
Package16-lead SOIC wide body

Nine point seven seven microvolts per LSB, and what that is on a shunt

Six hundred and forty millivolts peak to peak across 65536 codes is 9.77 microvolts per LSB at 16 bits. Put a 2 milliohm shunt in front of it and the full scale input becomes 100 A with 4.88 mA per LSB, which is the resolution of a motor phase current sensor without any programmable gain in the path. Change the shunt to 2 milliohms to 1 milliohm and the range doubles to 200 A with 9.77 mA per LSB. That trade is the whole specification of a phase current sensor, and it is made at the shunt, not at the converter, because the plus or minus 200 mV input range is fixed.

Twenty megahertz divided by the filter gives the sample rate

The modulator runs at the clock rate, so the useful sample rate is set by the decimation ratio in the digital filter behind it: 20 MHz with an oversampling ratio of 256 gives 78.1 kSPS, 128 gives 156.3 kSPS and 64 gives 312.5 kSPS. Higher ratios buy resolution and latency, lower ones buy loop bandwidth, and a motor control loop at 8 kHz of current loop bandwidth can afford the 256 ratio while a fast outer loop cannot. The first sample after a step is delayed by the filter's group delay, which is several output periods, and that latency is what limits the loop bandwidth long before the 16-bit resolution does.

Five thousand volts rms is 7071 V peak, and 891 V peak is the working voltage

The UL 1577 figure of 5000 V rms for one minute is a test, not an operating condition: as a sine wave it is 7071 V peak, applied once for a minute to prove the barrier. The figure that governs a board is the 891 V peak working voltage from the VDE 0884-10 rating, and the creepage and clearance in the 16-lead wide body are drawn for it. A three phase inverter with a 400 V dc bus puts roughly 565 V peak across the barrier plus the switching overshoot, so the 891 V working voltage covers it with margin, while a 690 V drive does not. The 20 mA at 5.25 V, 105 mW, is the whole isolated side budget including the modulator, and it is why the part replaces an optocoupler plus an amplifier plus an isolated supply in a phase current path.

Before the order goes out

The AD7401 needs an external clock while the AD7400 carries its own, and the two are not interchangeable on a board even where the modulator is the same. The ADC and DAC cross reference lists the modulators and the converters used behind them, the obsolete part hub is where the life cycle of the isolated modulator family is tracked, and the analog and mixed signal category page holds the rest of the isolation and conversion portfolio.

Request Quote — In Stock, 100% New & Original, Full Warranty