Contact Us

AD7323BRUZ

Brand: Analog Devices
Analog Devices AD7323BRUZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD7323BRUZ — Analog & Mixed-Signal ICs | Superb Automation

AD7323BRUZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD7323BRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD7323BRUZ: Four Channels That Accept Plus and Minus 10 V Directly at 500 kSPS

The AD7323 is a four channel successive approximation converter with 12 bits plus a sign bit, a throughput rate of 500 kSPS, and software selectable input ranges of plus and minus 10 V, plus and minus 5 V, plus and minus 2.5 V and 0 V to 10 V. It accepts true bipolar signals without an external level shifting amplifier, the four inputs can be configured as four single ended channels, two true differential pairs or two pseudo differential channels, and an on chip sequencer walks the channels without host intervention. It has a 2.5 V internal reference, a 22 MHz full power signal bandwidth, draws 18 mW, and comes in a 16-lead TSSOP on the industrial CMOS process.

Plus and minus 10 V on a single 5 V supply is the point of the part

A converter that accepts plus and minus 10 V with a 5 V supply has an internal high voltage front end, which is what the industrial CMOS process provides. Without it, a plus and minus 10 V signal has to be attenuated and offset by an external amplifier, which costs a precision resistor network, an offset reference, and the errors of both. Removing that stage is worth more than the converter itself in a channel count application, and it is the reason this part appears in PLC input cards and motor control feedback instead of a plain 5 V converter with a divider.

4.88 mV per code on the wide bipolar range

The output word is 13 bits wide including the sign, so the magnitude has 4096 codes, and on the plus and minus 10 V range the span is 20 V with 4.88 mV per code. On the 0 V to 10 V range the same converter has 2.44 mV per code, which is a factor of two better in resolution for the same part. That asymmetry is worth knowing when a specification is being written: if the signal only occupies 0 V to 10 V, selecting the unipolar range doubles the resolution and halves the size of one code, and the only cost is the register setting.

ParameterValueWhat it decides
Resolution12 bits plus sign4096 codes either side of zero
Throughput500 kSPS2 us per conversion, including acquisition
Input rangesPlus and minus 10, 5, 2.5 V and 0 V to 10 VSoftware selected, no external divider
Code size4.88 mV on the wide range2.44 mV on the unipolar range
Channel configurationFour single ended, two differential pairs, two pseudo differentialSame pins, register selected
SequencerProgrammable channel sequenceNo host write per conversion
Full power bandwidth22 MHzThe front end tracks a fast signal before sampling
Reference2.5 V internalNo external reference for a 0 V to 10 V span
Power18 mW36 uW per kSPS at full rate
InterfaceSerial, SPI compatibleOne data line for four channels
Supply5 V analog, separate logic supply3.3 V host without a level shifter
Package16-lead TSSOPFour channels in a 5 mm body
ProcessIndustrial CMOS with high voltage devicesBipolar input on a low voltage rail

The sequencer and what it saves

Without a sequencer, reading four channels at 500 kSPS means the host writes a channel address before every conversion, and the bus transaction becomes the limit rather than the converter. The on chip sequencer stores a list of channels and steps through it on each conversion, so the host reads results and never writes addresses. On a motor control loop that is the difference between a converter that can run at its rated rate and one that runs at the rate the firmware allows, and it also makes the channel-to-channel timing deterministic, which matters when the readings are used to compute a vector.

Two differential pairs from four single ended pins

Configuring the part as two differential pairs halves the channel count and doubles the rejection of common mode noise, which is the usual trade on a motor phase current measurement. The pair has to be adjacent in the pinout and the source impedance of both legs has to match, because an unmatched source converts common mode noise into a differential error. On a shunt measurement the two legs are the two ends of the same resistor, so the matching is inherent and the differential configuration is straightforwardly better than two single ended readings subtracted in software.

Getting the reference right on a bipolar range

The internal 2.5 V reference sets the conversion span, and the input range selection scales the signal into it. That means the accuracy of the plus and minus 10 V range depends on the internal reference just as the 0 V to 10 V range does, and the reference drift shows up as a gain error over temperature rather than as an offset. A board that calibrates the channel at 25 degrees C and then runs at 70 degrees C sees the reading drift by the reference drift, which is the same term for every channel, so a single reference measurement can correct all four.

Sourcing a bipolar input converter

The order code fixes the package, and the 16-lead TSSOP version is the one used where four channels are enough and board area is tight. Parts that accept bipolar inputs without a front end amplifier can be compared through ADC DAC cross reference, the industrial control side of this class of board is covered in OEM procurement, and where the exact code is on a long lead time the options are in component lead time solutions.