AD7294BSUZ
Product Specifications
AD7294BSUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7294BSUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD7294BSUZ: ADC, Four DACs, Current Sense and Temperature on One Die
The AD7294 is a monitoring and control system rather than a single function part. It contains a 12-bit successive approximation converter with a 3 us conversion time and four uncommitted input channels that accept a reference or twice the reference as the full scale span, two high side current sense inputs that work from 5 V to 59.4 V with a 200 mV full scale and 0.5 percent maximum gain error, two external diode temperature channels covering minus 55 to plus 150 degrees C with 2 degrees C accuracy and series resistance cancellation, an internal temperature sensor, four 12-bit monotonic digital to analog converters with a 15 V output capability, five volt span and up to 10 V of offset, and per channel minimum and maximum recorders with programmable alert thresholds and hysteresis. It comes in a 64-lead TQFP or a 56-lead LFCSP.
200 mV of current sense range is 4.9 mA per code on a 10 milliohm shunt
The current sense inputs have a 200 mV full scale span, so a 12-bit converter resolves 48.8 uV, and with a 10 milliohm shunt that is 4.9 mA per code up to a 20 A full scale. A 0.5 percent gain error is 1 mV, which is 100 mA on the same shunt, twenty codes. That ratio is the important one: the resolution is far finer than the accuracy, so averaging does not improve the current reading, and a calibration against a known current is the only way to get inside the gain error. On a 1 milliohm shunt the same 200 mV range gives 200 A full scale and 48.8 mA per code, which is the right choice for a battery string and the wrong one for a 2 A load.
The four DACs are not precision sources
The four 12-bit converters have a 5 V span with up to 10 V of offset, a 15 V output capability, 10 mA of sink and source current and an 8 us settling time, and they power up to 0 V. They are there to trim a threshold, set a comparator limit or drive a control input, and the 12-bit resolution on a 5 V span is 1.22 mV. They are not a substitute for a precision reference channel, and using one to set a 0.1 percent threshold on a 50 V rail is a mistake: 1.22 mV of a 50 V rail is 0.0024 percent, which sounds fine until the offset drift of the converter over temperature is added.
| Parameter | Value | What it decides |
|---|---|---|
| ADC | 12 bits, 3 us conversion | About 300 kSPS for a single channel |
| Uncommitted inputs | Four, single ended or differential | Reference or twice reference full scale |
| Current sense inputs | Two, 5 V to 59.4 V common mode | High side sensing without a level shift |
| Current sense span | 200 mV, 0.5 percent gain error | 48.8 uV per code, 1 mV of gain error |
| External temperature | Two diode channels, minus 55 to plus 150 degrees C | 2 degrees C accuracy, series resistance cancelled |
| Internal temperature | One sensor, 2 degrees C accuracy | Board level thermal monitoring |
| DACs | Four, 12 bits, monotonic | 1.22 mV per step on a 5 V span |
| DAC output | 15 V capability, 10 mA drive | Drives a control pin or a bias network |
| DAC settling | 8 us | Set points and thresholds, not waveforms |
| DAC power up | 0 V | No output before the host writes |
| Monitoring | Minimum and maximum recorders | A transient is caught without polling |
| Alerts | Programmable thresholds and hysteresis | An interrupt instead of a software loop |
| Packages | 64-lead TQFP or 56-lead LFCSP | Pin count driven by the input count |
Series resistance cancellation on a diode input
A remote diode temperature measurement pushes two currents through the junction and measures the difference in forward voltage, and the series resistance of the trace and the bond wire adds a term that is proportional to the current difference and therefore does not cancel. The cancellation scheme takes a third measurement to remove that term. Without it, a 1 ohm of series resistance at a 10 uA to 100 uA current step is 90 uV, which is several degrees of error, and that is the reason a temperature channel on a power board reads high until the cancellation is used.
Why a monitor part exists at all
Four uncommitted inputs, two current senses, three temperature channels and four control outputs is the input count of a base station power amplifier bias board or a 48 V automotive controller, and doing that with separate parts costs board area, an I2C bus and a set of address decoders. Putting it on one die also puts all the channels on one conversion sequence, so the readings are simultaneous enough to be compared with each other. The trade is that one failure takes the whole monitor function, which is why the alert thresholds and the recorders are there: the part is expected to report its own overload.
Procuring a monitoring subsystem
The order code fixes the package, and the two package options differ in the number of pins brought out rather than in function, so a board change between them is a footprint change. Parts that combine a converter with current sense or temperature channels can be compared through ADC DAC cross reference, the telecom and RF side of this class of board is covered in RF component sourcing, and a multi channel board bill of materials is consolidated through one stop BOM sourcing.