AD7172-2BRUZ-RL7
Product Specifications
AD7172-2BRUZ-RL7
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD7172-2BRUZ-RL7 from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
AD7172-2BRUZ-RL7: 24 Bits, 31.25 kSPS, and the 161 us That Sets the Channel Count
The AD7172-2BRUZ-RL7 is a 24-bit sigma-delta converter in a 24-lead TSSOP with two fully differential or four single-ended inputs, a crosspoint multiplexer, true rail-to-rail analogue and reference input buffers, an on-chip 2.5 V reference with 2 ppm per degree C of drift, and an SPI interface that configures each channel separately. Output data rates run from 1.25 SPS to 31.25 kSPS, the channel scan rate is 6.21 kSPS per channel with fully settled data at 161 us, and the part achieves 17.2 noise free bits at 31.25 kSPS and 24 noise free bits at 5 SPS. Integral nonlinearity is plus or minus 2 ppm of full scale, 50 Hz and 60 Hz rejection is 85 dB with a 50 ms settling window, and the part is specified from minus 40 C to 105 C.
This is the converter you choose when the signal is slow, the channel count is small, and the accuracy has to be real rather than headlined. The two numbers that decide most boards are the 161 us settling per channel and the drift of the internal reference, because the first sets how many channels fit in a scan and the second sets whether the internal reference can be used at all.
161 us per channel is the scan budget
At 6.21 kSPS per channel the period is 161 us, which is exactly the settling time the data sheet quotes. There is no overhead in that number: the channel change, the settling and the conversion all happen inside it. Four single-ended channels scanned at that rate take 644 us, or 1.55 kSPS per channel, so a four channel scan cannot run at the headline 31.25 kSPS. A system that wants 31.25 kSPS on one channel uses one channel; a system that wants four channels gets 1.55 kSPS each, and that is fast enough for temperature, pressure and bridge signals.
The 85 dB of 50 Hz and 60 Hz rejection belongs to the 27.27 SPS setting with a 50 ms settling window, not to the fast rates. A part running at 31.25 kSPS has a settling window of 32 us and no rejection at mains frequencies, so a bench that needs 50 Hz rejection has to give up the speed. That is a property of the digital filter, not a limitation of the part, and it is the same trade in every sigma-delta converter.
| Resolution | 24 bits, no missing codes |
| Inputs | 2 fully differential or 4 single-ended, crosspoint multiplexer |
| Output rate | 1.25 SPS to 31.25 kSPS |
| Channel scan | 6.21 kSPS per channel, 161 us fully settled |
| Noise free bits | 17.2 at 31.25 kSPS, 24 at 5 SPS |
| Linearity | Plus or minus 2 ppm of full scale |
| Reference | Internal 2.5 V, 2 ppm per degree C, 725 uV over 145 degrees |
| Mains rejection | 85 dB at 50 Hz and 60 Hz with a 50 ms settling window |
| Interface | SPI, per channel configuration, GPIOs for external multiplexers |
| Temperature | Minus 40 C to 105 C, 24-lead TSSOP |
The internal reference drifts 4865 LSB at 24 bits, so 24 bits is a resolution not an accuracy
Two parts per million per degree C over the 145 degree span from minus 40 C to 105 C is 290 ppm, which on 2.5 V is 725 uV. One 24-bit LSB on the same span is 149 nV, so 725 uV is 4865 LSB, or about 12.3 bits of drift. The converter's own noise at 5 SPS is 24 noise free bits, so the reference is nine orders of magnitude worse than the converter's noise at the top of the temperature range. The internal reference is therefore usable for a ratiometric measurement or for a relative reading, and an absolute DC measurement over temperature needs an external reference with a better drift or a calibration.
The same arithmetic repeats at the fast rate. At 31.25 kSPS the 17.2 noise free bits are 150,562 counts, which is 16.6 uV, and the reference drift of 725 uV is 44 of those counts, or 5.5 bits. So the fast mode's 17.2 bits also collapse over temperature unless the reference is stable. Both statements point the same way: the converter is not the accuracy limit in a system that needs absolute volts, and the reference is.
Two questions buyers ask
What does 17.2 noise free bits at 31.25 kSPS mean in volts?
One hundred and fifty thousand counts on a 2.5 V span is 16.6 uV of peak to peak noise, which is about 5.5 uV RMS. Against a 10 mV load cell signal that is 0.06 percent of reading, which is usable; against a 1 mV thermocouple signal it is 1.7 percent, which is not. The part is a 24-bit converter whose usable resolution depends on the full scale chosen, and choosing a smaller full scale with a higher gain is the way to get the resolution the headline suggests.
Can the GPIOs drive an external multiplexer?
Yes, and they are synchronous with the conversion timing, which is what makes an 8 or 16 channel system possible from a two channel part. The GPIOs change state as part of the channel sequence, so the external multiplexer settles inside the same 161 us budget. A slower multiplexer adds its settling time to the channel period, and that has to be added to the scan arithmetic rather than assumed away.
Ordering and supply
The BRUZ suffix is the 24-lead TSSOP, lead free, in tape and reel. Substitution traps in this class are the reference drift, the filter options and the channel scan rate. A converter with the same 24 bits and a 10 ppm per degree C reference is 5.5 bits worse over temperature, and a converter without the crosspoint multiplexer cannot scan the channels in the order the application needs.
We hold and source this family for production and for repair. Start from the analog mixed signal ICs family page, compare a candidate against the ADC and DAC cross reference, and where a substitute has to be qualified on an existing board, the checklist in how to verify a drop in replacement puts the reference and the settling budget first.
Request Quote — In Stock, 100% New & Original, Full Warranty