Contact Us

AD706JRZ

Brand: Analog Devices
Analog Devices AD706JRZ is a analog & mixed-signal component designed for Instrumentation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

AD706JRZ — Analog & Mixed-Signal ICs | Superb Automation

AD706JRZ

Analog Devices — Analog & Mixed-Signal ICs

Product Overview

The AD706JRZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-resolution data conversion with excellent SNR and THD
  • Wide dynamic range and high linearity across operating conditions
  • Integrated voltage reference with low temperature drift
  • Flexible digital interface — SPI, I2C, or parallel options
  • Industrial/automotive temperature range with guaranteed specs
  • Low power consumption with power-down modes

Key Specifications

Resolutionbits
Channels—
Sample RatekSPS
Interface—
Supply VoltageV
Operating Temp°C
Package—
INLLSB
SNRdB
THDdB

Applications

Precision Instrumentation Industrial Process Control Medical Imaging & Diagnostics Automotive Sensor Interfaces Communications Infrastructure Test & Measurement

Request Quote — In Stock, 100% New & Original, Full Warranty

AD706JRZ: The Commercial Window Version of the 200 pA Dual Op Amp

The AD706JRZ is the J grade of the dual picoampere input amplifier, and the J grade is a temperature window decision rather than a dc specification decision: the offset, drift, bias current and noise limits are the same family figures, 100 microvolts maximum, 1.5 microvolts per degree Celsius maximum, 200 pA maximum and 0.5 microvolts peak to peak of low frequency noise, but the part is guaranteed over the commercial window rather than the industrial one. For an instrument that lives in a cabinet at room temperature that is the right trade, because the drift budget over 0 to 70 degrees is a quarter of what it is over 40 degrees below zero to 85 above. The dual body contains both amplifiers and draws 750 microamps in total.

Published values

ParameterValue
Channels2 per package
Input offset100 microvolts maximum
Offset drift1.5 microvolts per degree Celsius maximum
Input bias current200 pA maximum
Low frequency noise0.5 microvolts peak to peak, 0.1 Hz to 10 Hz
Supply current750 microamps total
GradeJ, commercial temperature window
Bodies8-lead DIP and 8-lead surface mount
Tape and reelSurface mount body to EIA-481A
Data sheet applicationsActive filters, instrumentation, integrators

What a temperature window costs in drift

Drift is specified per degree and multiplied by the window the part is guaranteed over, so the same 1.5 microvolts per degree is a 105 microvolt excursion over the industrial window and a 105 microvolt figure that an office instrument never sees. The practical consequence is that a circuit with a commercial part can spend its error budget on the amplifier's room temperature offset and its long term stability, while an industrial build has to assume the full drift. Programs that qualify one board for both markets usually specify the industrial grade and pay for it once rather than running two builds.

Integrators, filters and the noise that follows

The low frequency noise figure of 0.5 microvolts peak to peak over 0.1 Hz to 10 Hz is the number that limits a slow measurement, because a filter with a 1 second time constant passes exactly that band to the output. A chopper stabilised amplifier has lower offset but puts its switching residue at a few hundred kilohertz, which is harmless in a slow loop and damaging in a wideband one. This part sits between the two: it has neither the offset of a plain precision bipolar part nor the switching noise of a chopper, which is why it appears in lock in amplifiers, precision rectifiers and low frequency instrumentation.

Grade and body questions

Because the J and A grades share the die and differ only in the guaranteed window, a substitution from A to J is a documentation change and a review of the ambient specification, not a circuit change. Body and pinout are shared with the rest of the family, so a socket built for a dual precision amplifier will take it. Where four channels are needed the quad version carries the same amplifier, and consolidating two duals into one quad is one of the simpler cost reductions available on a mature board. The amplifier cross reference lists the precision families we supply, the ADI second source page covers grade equivalence, and the cost reduction page covers the consolidation arithmetic.