AD633ARZ
Product Specifications
AD633ARZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD633ARZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD633ARZ: A Four Quadrant Multiplier With a 10 V Scaling Reference Inside
The AD633ARZ is a complete four quadrant analog multiplier, and the word complete is the specification that matters: the transfer function is W equals the quantity X1 minus X2 times the quantity Y1 minus Y2, divided by 10 V, plus Z. Both input pairs are differential and high impedance, the Z input is a unity gain summing node, and the division by 10 V comes from a laser trimmed reference inside the part. Total error is within 2 percent of full scale without any external trim, Y input nonlinearity is typically under 0.1 percent, and the output noise referred to the output is typically under the level that matters for a 1 percent system. Nothing external is needed to make it multiply, which is why it survives in circuits that could do the same job in a processor.
Published values
| Parameter | Value |
|---|---|
| Transfer function | W equals X1 minus X2, times Y1 minus Y2, divided by 10 V, plus Z |
| Quadrants | Four |
| Input structure | Differential, high impedance X and Y pairs, unity gain summing Z input |
| Full scale output | 10 V nominal, set by an internal buried Zener reference |
| Total error | Within 2 percent of full scale, laser trimmed |
| Y input nonlinearity | Typically under 0.1 percent |
| External components | None required for multiplication |
| Bodies | 8-lead DIP and 8-lead surface mount |
| Data sheet applications | Multiplication, division, squaring, modulation, phase detection, voltage controlled gain |
The Z pin is what makes it a building block
Because the output buffer's summing input is brought out, two multipliers can be added without an external op amp, the output can be offset, and the multiplier can be turned into a divider by closing a loop around it. That single pin is the difference between a part that multiplies and a part that can be used as a gain control element, a squared envelope detector, or a phase detector. The unity gain summing input also means the output can be converted to a current by summing into a resistor, which is how the part drives a current output stage in a variable gain amplifier.
Where an analog multiplier still beats a processor
A digital replacement needs a converter on each input, a multiply, a converter on the output and a latency budget, which for a control loop adds a sampling delay that shows up as phase margin loss. An analog multiplier has propagation delay in the tens of nanoseconds and no quantisation, so it stays in loops where a processor would need a faster sample rate than the loop can tolerate. The accuracy ceiling of 2 percent of full scale is the trade: a digital path can beat that easily, but not inside the same loop bandwidth without a much faster converter.
Buying a multiplier that has been in production for decades
The 8-lead body is shared with a number of parts, but the internal reference is what sets the scaling, so a substitute with a different divisor is not a drop in replacement even when the pinout matches. Grade and body are the only things the order code encodes here, and the accuracy is quoted for the family rather than per grade. The amplifier cross reference lists the analog function blocks we can supply, the pin to pin cross reference covers which parts share this outline, and the obsolete part cross reference hub covers the case where the exact code has gone.