AD5686RARUZ
Product Specifications
AD5686RARUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD5686RARUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD5686RARUZ: The 16-Bit Quad DAC Where Total Unadjusted Error, Not Linearity, Sets the Accuracy
The AD5686RARUZ is the 16-bit member of the quad nanoDAC+ family and it is a good example of a part whose headline number and whose usable number are different. The integral nonlinearity is plus or minus 2 LSB maximum at 16 bits, which sounds like a converter that can resolve 1 part in 32768 cleanly. The total unadjusted error is plus or minus 0.1 percent of full scale maximum, which at 16 bits is plus or minus 65.5 LSB. Both statements are true, and the second one is the one that decides whether an absolute output voltage can be trusted without calibration.
Linearity is what the converter does, TUE is what the pin delivers
Linearity describes the shape of the transfer function once offset and gain are removed. Total unadjusted error includes the offset error of plus or minus 1.5 mV maximum and the gain error of plus or minus 0.1 percent of full scale, and those two terms are not removed by anything on the chip. On a 2.5 V full scale, 0.1 percent is 2.5 mV, which is 65.5 codes of 38.1 uV each, and 1.5 mV of offset is a further 39 codes. A system that needs a 16-bit absolute level therefore has to either calibrate at final test or accept an error two orders of magnitude above the resolution. A system that needs a 16-bit relative step, for instance a ratiometric sweep that starts and ends at the same code, is much closer to the linearity figure and can use the part as specified.
The on-chip 2.5 V reference and the gain pin
The reference is internal and enabled by default, specified at 2 ppm per degree C typical and 5 ppm per degree C maximum. Over the minus 40 C to plus 105 C range of the part that is 145 degrees, so the typical drift accumulates to 290 ppm, which is 725 uV on 2.5 V or 19 codes, and the maximum drift accumulates to 725 ppm, which is 1.81 mV or 47.5 codes. The drift term is therefore comparable to the gain and offset terms and not a rounding error. A GAIN pin selects a gain of 1 or 2, so the full scale is 2.5 V or 5 V, and the second option needs a supply above 5 V to reach the top code. The reference can also be overdriven externally when a tighter or a different value is required, and that removes the internal drift from the budget at the cost of an external part.
| Parameter | Value | What it decides |
|---|---|---|
| Resolution | 16 bits, quad channel | 38.1 uV per code on a 2.5 V full scale |
| Integral nonlinearity | Plus or minus 2 LSB maximum | Transfer shape, offset and gain removed |
| Total unadjusted error | Plus or minus 0.1 percent of full scale | 65.5 codes, the real absolute accuracy |
| Offset error | Plus or minus 1.5 mV maximum | A further 39 codes at 2.5 V full scale |
| Internal reference | 2.5 V, 2 ppm per C typical, 5 ppm per C maximum | 725 uV to 1.81 mV of drift over 145 degrees |
| Full scale | 2.5 V at gain 1, 5 V at gain 2 | 5 V option needs a rail above 5 V |
| Output drive | 20 mA within 0.5 V of either rail | Can drive a remote node without a buffer |
| Glitch | 0.5 nV seconds | Output step small enough for a control loop |
| Interface | 50 MHz SPI with readback and daisy chain | Four channels plus verification on one bus |
| Power | 3.3 mW at 3 V, 4 uA in power-down | Per channel shutdown for unused outputs |
| Package | 3 mm by 3 mm 16-lead LFCSP and TSSOP | Two bodies, same die, different thermal path |
Start-up state is an order code property, not a default
The RSTSEL pin decides whether the outputs come up at zero scale or at midscale, and the choice is made on the board rather than in software. A midscale start means the output sits at half full scale before the first write, which is the right behaviour for a bias node that must not slam to zero, and the wrong behaviour for a setpoint that must start at zero. Because a 16-bit midscale value is 1.25 V on a 2.5 V full scale, that state is a real output, not a disabled one. Power-down is per channel and drops the part to 4 uA at 3 V, so a system that uses two of the four channels can leave the other two off without a second order code.
Where the part fits
Optical transceiver bias and modulation control, base station power amplifier biasing, programmable logic controller analogue output cards and data acquisition offset correction all want several high resolution levels that stay put. The 20 mA drive capability within 0.5 V of the rails is what allows the DAC to drive a remote node or a long trace without a follower, and the readback path is what allows the host to confirm the code that actually landed. Where the requirement is a monitored 4 to 20 mA loop rather than a voltage, this family has a loop powered member instead, and the ADC and DAC cross reference page lists the pairs worth comparing. For second sourcing an existing ADI socket, the ADI part second source page sets out what has to be checked, and for a mixed BOM the one stop BOM sourcing page covers consolidation.