AD5445YRUZ
Product Specifications
AD5445YRUZ
Analog Devices — Analog & Mixed-Signal ICs
Product Overview
The AD5445YRUZ from Analog Devices is a high-performance analog / mixed-signal IC providing precision signal acquisition, conversion, and conditioning. Analog Devices (ADI) is a world leader in high-performance analog, mixed-signal, and DSP ICs for instrumentation, healthcare, automotive, and communications.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- High-resolution data conversion with excellent SNR and THD
- Wide dynamic range and high linearity across operating conditions
- Integrated voltage reference with low temperature drift
- Flexible digital interface — SPI, I2C, or parallel options
- Industrial/automotive temperature range with guaranteed specs
- Low power consumption with power-down modes
Key Specifications
| Resolution | bits |
| Channels | — |
| Sample Rate | kSPS |
| Interface | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
| INL | LSB |
| SNR | dB |
| THD | dB |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
AD5445YRUZ: A 17 ns Write Cycle and a 120 ns Analogue Settle Are Both in the Data Sheet
The AD5445 is a 12-bit current output multiplying converter with a parallel interface, a 17 ns write cycle, a 20.4 MSPS update rate, a 10 MHz multiplying bandwidth and an external reference input that accepts up to 10 V while the part itself runs from 2.5 V to 5.5 V. Two timing numbers sit far apart in that list and are easy to conflate. The write cycle is how fast the register can be loaded. The analogue output takes 80 ns typical and 120 ns maximum to settle to within 1 mV of a full scale step, so a system that pushes the bus at 20.4 MSPS is updating the output faster than the output settles, and the effective resolution falls at the top of that rate.
Current output means an external amplifier, and that sets the speed
The converter sources current into a virtual node, so a precision current to voltage amplifier is required, and the internal feedback resistor tracks the ladder over temperature at 5 ppm per degree C. Using a discrete resistor instead throws that tracking away, and the gain drift becomes the resistor's own. The amplifier's settling time adds to the converter's, so the 10 MHz multiplying bandwidth is a small signal figure that assumes a fast amplifier and a 100 ohm load. Feedthrough to the output with the converter deselected is quoted at 81 dB, which is what limits a multiplexed system where several converters share one amplifier.
| Parameter | Published value | What it limits |
|---|---|---|
| Resolution | 12 bits, 1 LSB integral linearity | Accuracy at the low end of the range |
| Write cycle | 17 ns | Bus rate, 20.4 MSPS update |
| Settling to 1 mV | 80 ns typical, 120 ns maximum | The real update rate before resolution is lost |
| Reference input | Up to 10 V, independent of the supply | Output span and noise gain |
| Multiplying bandwidth | 10 MHz | Modulation and waveform use |
| Supply current | 0.4 uA typical | Battery and loop powered products |
The reference can be larger than the supply
This is the detail that makes a multiplying converter useful in a 3.3 V system: the ladder is a current steering network, so the reference input is not clamped to the supply and a 10 V reference produces a 10 V full scale output from a 3.3 V part, as long as the external amplifier can swing that far on its own rail. It also means the reference input is a signal input: in a multiplying application the reference is modulated, and the multiplying bandwidth of 10 MHz describes how fast that modulation can be. A converter used as a digital attenuator or a programmable gain element lives entirely on this pin.
The digital interface details that bite
The parallel interface is latched, so the bus can run asynchronously to the update, and the register can be read back through the data pins, which is how a self test confirms that the written code arrived. On power up the register fills with zeros and the output sits at zero scale, so a system that needs a midscale start requires a write before anything else is enabled. Readback also removes the guesswork in a system where the converter is at the far end of a ribbon cable and the host has to know whether the code was corrupted.
Sourcing a multiplying converter
These parts are upgrades of the AD7524, AD7533 and AD7545 line, which means the older codes are still in sockets in plenty of equipment and the substitution direction is usually forward. The ADC DAC cross reference page covers the family, the obsolete part cross reference hub page covers the legacy route, and lot checks follow the incoming inspection plan.