Door Interlock Switches for Safety Circuits
Product Specifications
Product Overview
A door interlock switch is the part that tells the control system a guard is closed. It is not a limit switch with a different label: the NC contact has to open by positive mechanical action when the actuator withdraws, so a welded contact cannot leave the machine running with the door open.
Two families cover most cabinet and guard doors. The tongue operated switch has a separate actuator that is mounted on the door and enters the head of the switch; the head can be rotated so the same switch works on a left or a right hinged door. Contact forms run from 1NC/1NO for a simple guard to 3NC for a door that feeds two contactors and a monitoring relay.
The installation detail that decides whether it works is the actuator gap. Too far and the guard is reported closed before the door is shut; too close and the tongue hits the head on a slammed door. The switch body, the actuator and the door stop have to be set together, which is why the actuator is a separate line on the order and not an accessory in the box.
Key Specifications
| Property | Schmersal AZ 17 | Omron D4NS |
|---|---|---|
| Contact forms | 1 NO and 1 NC, or 2 NC | 1NC/1NO, 2NC, 2NC/1NO, 3NC, and make before break versions |
| Thermal current | 10 A | 10 A conventional free air |
| Utilisation category | AC-15 230 V 4 A, DC-13 24 V 4 A | AC-15 240 V 3 A, DC-13 250 V 0.27 A |
| Positive opening | 11 mm travel, 17 N minimum per NC contact | 10 mm travel, 60 N minimum opening force |
| Protection | IP67 | IP67 |
| Housing | glass fibre reinforced thermoplastic, 30 x 60 x 30 mm | resin body, slow action head |
| Connection | M16 cable entry or M12 4-pin connector | PG13.5, G1/2, M20, 1/2-14NPT or M12 connector |
| Mechanical life | 1,000,000 operations minimum | 1,000,000 operations minimum |
Included Models and Order Codes
The code after the family name is the contact form and the entry, not the actuator. AZ 17-11ZRK is one NO plus one NC with a latching force of 30 N and an M16 entry; the ST suffix swaps the cable entry for an M12 connector. Omron uses the digit after D4NS for the entry: 1 is PG13.5, 4 is M20, 9 is M12.
| Part number | Contact form | Entry or connector | Body | Protection |
|---|---|---|---|---|
| AZ 17-11ZRK | 1 NO, 1 NC | M16 cable entry | 30 x 60 x 30 mm | IP67 |
| AZ 17-11ZRK-ST | 1 NO, 1 NC | M12, 4-pin, A-coded | 30 x 78.5 x 30 mm | IP67 |
| AZ 17-11ZRK-1637 | 1 NO, 1 NC, gold contacts | M16 cable entry | 30 x 60 x 30 mm | IP67 |
| D4NS-1AF | 1NC/1NO, slow action | PG13.5 | resin | IP67 |
| D4NS-1BF | 2NC, slow action | PG13.5 | resin | IP67 |
| D4NS-1CF | 2NC/1NO, slow action | PG13.5 | resin | IP67 |
| D4NS-1DF | 3NC, slow action | PG13.5 | resin | IP67 |
| D4NS-4CF | 2NC/1NO, slow action | M20 | resin | IP67 |
| D4NS-9BF | 2NC, slow action | M12 connector | resin | IP67 |
Choosing the Contact Form
The contact form follows the safety circuit, not the door. The table is the short version of the usual combinations.
| Circuit | Contact form | Typical part |
|---|---|---|
| One contactor, one monitoring channel | 1NC/1NO | AZ 17-11ZRK, D4NS-1AF |
| Two contactors in series | 2NC | D4NS-1BF |
| Two contactors plus a signal to the PLC | 2NC/1NO | D4NS-1CF, D4NS-4CF |
| Two doors on one guard, both monitored | 3NC | D4NS-1DF |
| Machine built for Europe, M20 entry | 2NC/1NO | D4NS-4CF |
| Machine built for North America, M12 | 2NC, quick change | D4NS-9BF |
Key Features
Positive opening on the NC contact – the NC side opens by mechanical action, not by spring force alone, which is the property the safety circuit relies on.
Contact forms from 1NC/1NO to 3NC – one family covers a simple guard and a door that feeds two contactors and a monitoring relay.
Rotatable head – the same switch works on a left or a right hinged door, so a spare part fits either side of the machine.
IP67 body – wash-down and coolant mist do not reach the contacts, and the slot cover keeps dust out of the unused opening.
M12 connector option – a door that has to be removed for transport can be unplugged and refitted without re-terminating the cable.
Low level coded actuator – the actuator is coded to the switch, so a screwdriver or a second actuator does not defeat the guard.
Applications
Interlocks are chosen by what the door protects and how often it is opened. Three patterns.
Machine guards and access doors – a tongue switch on the guard, with the actuator on the door and the head set so the NC contact opens before the door is wide enough to reach the tool.
Control cabinets with live busbars – an interlock on the cabinet door that drops the incomer when the door is opened, with a 2NC form feeding two contactors.
Test and burn-in chambers – a switch with an M12 connector, so the door can be lifted off for a chamber service and plugged back without a rewire.
Door stays and interlock switches are ordered with the hinges and locks for the same door, and both the SUPERB PCBA and the SUPERB PCB are checked against the panel wiring schedule so the safety circuit and the door hardware arrive together.
Sourcing and Cross-Reference
Order the actuator with the switch. The switch is supplied without it, and the actuator code depends on the approach direction and the door radius. A switch that arrives without an actuator cannot be commissioned.
Match the entry to the machine market. A machine for Europe normally takes M20; a machine for North America takes 1/2-14NPT; a machine with a pluggable door takes M12. An adapter is available but it adds a joint that can work loose.
Set the gap against the door stop. The actuator has to be inside the operating range when the door is closed and outside it when the door is open by the distance the risk assessment allows. The door stop, not the switch, sets that distance.
Do not rely on the switch to hold the door. The interlock reports position; the hinge and the door stay take the load. A switch used as a door stop fails at the head. See obsolete part cross reference when a machine is rebuilt around a discontinued switch.
The SUPERB Assembly team sets the actuator gap on the bench before the door is hung, because a tongue switch that is set after painting usually ends up too far from the actuator and trips on a slammed door.
Q: Is the actuator included, and can the switch be supplied with an M12 connector for a removable door?
A: Yes. Send the door drawing with the hinge side, the opening angle and the control voltage; the SUPERB Tech team quotes the stay and the interlock with the actuator and the connector that match the door.
Why Builders Buy Interlock Switches From SUPERB
- Contact form quoted against the circuit: the NC and NO count is checked against the contactors and the monitoring relay before the part number is confirmed.
- Actuator and entry in the same quote: the approach direction, the entry thread and the connector are listed so the switch can be commissioned on arrival.
- IP67 and coded actuation: the body is sealed for wash-down and the actuator is coded, so a spare key does not defeat the guard.
- Replacement for older machines: the same family covers PG13.5 and M20 entries, so a rebuild does not need the door plate to be re-punched.
Related Product Families
This page is part of the component range we supply for industrial, telecom, medical and defence builds. Continue with: Reed Switches and Magnetic Actuators, Inductive Proximity and Photoelectric Sensors, Cam Locks and Key Locking Latches, Continuous and Butt Hinges.