Contact Us

UCC3809DTR-2

Brand: Texas Instruments
Texas Instruments UCC3809DTR-2 is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

UCC3809DTR-2 — Power Management & Signal Chain | Superb Automation

UCC3809DTR-2

Texas Instruments — Power Management & Signal Chain

Product Overview

The UCC3809DTR-2 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

UCC3809DTR-2: an economy primary side controller with a 15 V lockout and a 5 V reference brought out

The UCC3809DTR-2 is a BCDMOS current mode controller for an isolated single ended converter, in an eight pin SOIC. The -2 member turns on at 15 V and off at 8 V, which is the wide window option and suits a bias rail charged from a high voltage start up resistor before the auxiliary winding takes over. Start up current is below 100 microamps, operation runs to 1 MHz, and the totem pole output sinks 0.8 A and sources 0.4 A, which drives a small to medium MOSFET directly or a larger one through a buffer.

Two features make this controller easy to apply. The 5 V reference is brought out on a pin, so the feedback divider, the timing current and any housekeeping circuit can be driven from it, and the soft start is programmed by a capacitor on the SS pin with an active low shutdown function on the same pin. Maximum duty is set by two resistors and a capacitor rather than by a fixed internal limit, so a forward converter can be given the reset time its core needs, and the whole oscillator is programmed by an external capacitor with a resistor setting the charge current.

Key electrical data for the UCC3809DTR-2

LockoutTurn on 15 V, turn off 8 V, the wide window member of the family
SupplyStart up current below 100 microamps, operation to 1 MHz
OutputTotem pole stage, 0.4 A source and 0.8 A sink, suitable for an N-channel MOSFET gate
Reference5 V brought out on a pin for the divider and the timing current
ControlProgrammable soft start with active low shutdown, programmable maximum duty through two resistors
TopologyIsolated single ended forward and flyback converters, primary side control

Package, marking and reel data

BodyD, SOIC 8 pin, ambient 0 C to 70 C on the UCC3809 rows
Reel2500 pieces on a 330 mm reel, 12.4 mm carrier, quadrant Q1
FinishNIPDAU at moisture level 1 unlimited on both the plain and the .A row
StatusBoth rows print NRND, which is not recommended for new builds

The status line is the first thing to settle on this code

Both addendum rows for this part print NRND. That is a different statement from obsolete: the part is still in production and still orderable, but the vendor no longer recommends it for a new build. For a customer who is already running the part, the practical question is how long the supply lasts and what replaces it, and for a customer bringing up a new board the question is why the vendor has moved on. The usual answer in this class is that the same function exists in a newer family with tighter reference tolerance and lower start up current, and the pinout may or may not match.

Because the status is NRND and not obsolete, a last time buy has not been triggered, but the risk of a quiet discontinuation over a product's life is real. The honest answer to a customer is to plan the second source before the first build rather than after the shortage notice, and to keep the electrical differences in a document that survives a personnel change. The electrical points that matter when a replacement is compared are the lockout window, the start up current and the reference tolerance, and a candidate that matches two of the three is not a substitute. The second source also has to be checked against the same temperature grade and the same body, since a part that matches electrically in a different package passes a bench comparison and fails at goods in. Our component obsolescence management page describes how we track that for parts in this position.

Buyer questions on the UCC3809DTR-2

Is an NRND part still available? Yes, in production. NRND means the vendor no longer recommends it for a new build, not that it has stopped shipping. We state the status on the quote.

Can the 5 V reference supply the timing network? It can, and the vendor's application circuit does exactly that. The reference has a limited output current, so the load has to be counted against that limit.

What does the -1 member change? The lockout, from 15 V to 10 V turn on with the same 8 V turn off. That suits a converter whose bias rail never reaches 15 V during start up.

Availability and cross reference

The reel is 2500 pieces and the family covers two lockout levels in the same pinout. Since both rows are NRND, the sensible approach is to buy against a forecast with a buffer rather than to run a lean inventory, and to keep the replacement candidate qualified in parallel. We hold the part and the candidate together and set out the plan on our last time buy and LTB planning page.