Contact Us

TPS54424RNVR

Brand: Texas Instruments
Texas Instruments TPS54424RNVR is a power management component designed for AI Servers & Low-Altitude Economy (Drone and UAV) and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TPS54424RNVR — Power Management & Signal Chain | Superb Automation

TPS54424RNVR

Texas Instruments — Power Management & Signal Chain

Product Overview

The TPS54424RNVR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TPS54424RNVR 17 V input 4 A buck in a 3.5 mm square body

The TPS54424RNVR is a 4 A synchronous step down converter that runs from 4.5 V to 17 V, with 19 V as the absolute maximum, and delivers 0.6 V to 12 V out. The switches are 14.1 milliohm high side and 6.1 milliohm low side inside a 3.5 mm by 3.5 mm HotRod QFN, and the control is peak current mode with an adjustable soft start and an adjustable input undervoltage lockout. The switching frequency runs from 200 kHz to 1.6 MHz and can be locked to an external clock.

Peak current mode is the reason the part needs no external compensation network worth speaking of: the loop is compensated on the COMP pin with two small components and the crossover follows the output capacitor. That is what makes a 4 A converter usable across a 12 V to 0.6 V core rail and a 12 V to 5 V housekeeping rail with the same bill of materials apart from the divider and the inductor.

The reference is 0.6 V with 0.85 per cent accuracy over temperature, and the minimum on time of 90 ns typical and 130 ns maximum sets how far down the output can go at high input. At 17 V input and 1.6 MHz the on time at a 0.6 V output is 22 ns, well below the minimum, so the part folds back in frequency rather than skipping pulses, which is the behaviour that keeps a low voltage rail from developing a large ripple at high line.

Key parameters from the SLVSDV8 document

Input range4.5 V to 17 V operating and 19 V absolute maximum, with UVLO rising at 4.1 V to 4.3 V
Output range0.6 V to 12 V with a 0.6 V reference, 596 mV to 604 mV at 25 degrees and 0.85 per cent over the full range
Output current4 A continuous from 14.1 milliohm high side and 6.1 milliohm low side switches
Switching frequency200 kHz at 250 k on RT to 1.6 MHz at the top of the range, synchronizable to an external clock
Current limitHigh side peak 5.6 A minimum, 6.8 A typical and 8.5 A maximum at 12 V input, with a low side sourcing limit and a low side sinking limit
Quiescent current580 microamp typical and 800 microamp maximum non switching, with a shutdown current in the low microamp range
Timing limitsMinimum on time 90 ns typical and 130 ns maximum at 50 per cent to 50 per cent of the input
Orderable bodyHotRod VQFN-HR, 18 pins, 3.5 mm by 3.5 mm, 3000 pieces on a large reel and 250 on a small reel at moisture level 2

What the current limit window means in practice

The high side peak limit is specified as a window from 5.6 A to 8.5 A on a 4 A part, which is a wide band, and the reason is that it follows the switch resistance and the temperature rather than a trimmed reference. A board that has to survive a 5 A load without tripping has to be checked against the 5.6 A bottom of the window, not the 6.8 A typical, and a board that has to protect a 4 A inductor has to accept that the peak can reach 8.5 A before the limit acts.

Hiccup mode follows a persistent fault, so a shorted load produces a low duty retry instead of a continuous current into the fault. That matters on a backplane where a shorted card should not drag the whole bus down.

Soft start, tracking and lockout on the same pins

The SS pin sets the ramp with a capacitor and can be driven from an external ramp for tracking. The EN pin has an adjustable threshold, so a divider from the input sets the point at which the converter starts, which is how a board is kept off until a 12 V bus is above 10 V. Between the two, a rail can be made to start at a defined supply level and rise at a defined rate, which is the whole sequencing requirement on most boards.

The internal soft start current is a few microamps and the ramp is linear, so the inrush into the output capacitor is set by the capacitor value and the ramp time rather than by the current limit. A 100 microfarad output ramping in 2 ms draws 50 mA beyond the load, well below a limit that acts at 5.6 A.

Where this part fits

Telecom and datacom line cards, industrial control boards, test instruments and medical equipment all use a 4 A rail at a point of load, and the 3.5 mm body fits between connectors where a larger package would not. The 19 V absolute maximum also covers a 12 V bus with a transient and a 15 V adapter input.

For a procurement team the useful point is that the same body covers 4 A at 17 V with one reel size, so a platform that grows from 2 A to 4 A does not change the placement. That comparison is set out in power management cross reference and in how to verify a drop in replacement.

What to check before a purchase order

The first field is the reel suffix, since the same body ships 3000 on a large reel and 250 on a small reel. The second is the moisture level and floor life, level 2 with one year, because a reel that has been open on a humid floor for a week needs baking before reflow. The third is the frequency setting resistor, since the RT value decides both the switching frequency and the point at which the part folds back at high line.

Our desk checks the reel and the floor life against the build schedule and flags a part that would need baking before it can be used. See incoming inspection plan and kitting service for how that is handled at goods in.