Contact Us

TLV5628

Brand: Texas Instruments
Texas Instruments TLV5628 is a power management component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

TLV5628 — Power Management & Signal Chain | Superb Automation

TLV5628

Texas Instruments — Power Management & Signal Chain

Product Overview

The TLV5628 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

TLV5628: octal 8 bit voltage output converter on a 3 V single supply in a 16 pin body

TLV5628 is an eight channel 8 bit digital to analog converter with a serial interface, buffered reference inputs and a simultaneous update latch in a SOIC body of 16 pins. The TLV5628 packs eight 8 bit voltage output converters into a 16 terminal body, either a small outline package or a plastic DIP. It runs from a single supply of 3 to 3.6 V, takes a serial word of 8 data bits, 3 channel select bits and a range bit, and offers an output that is either one or two times the reference. The converters are double buffered so a complete set of values can be loaded and then all eight outputs updated together through the LDAC terminal, and a power on reset sets a repeatable start up state. The output stage is half buffered and the reference inputs are high impedance.

Order code and package

Order codeTLV5628
Channelseight, voltage output
Resolution8 bit
Supply3 to 3.6 V single rail
Interfaceserial, 8 data bits plus 3 channel select bits plus a range bit
Output range1 times or 2 times the reference
Updatedouble buffered, all outputs at once through LDAC
Power on resetyes, sets a repeatable start up state
Output stagehalf buffered
Reference inputhigh impedance, buffered
Package16 terminal SOIC or plastic DIP
DocumentSLAS108A, January 1995, revised November 1995

Electrical parameters that decide the application

Resolution8 bit, 256 codes per channel
Supply range3 to 3.6 V
GradesC from 0 to 70 C, I from minus 40 to 85 C
Range bitselects 1 times or 2 times the reference
Simultaneous updateLDAC latches all eight outputs
Reference inputshigh impedance, so a resistor divider can drive them
Output stagehalf buffered, so the load resistance matters
Serial clockdata entered on the negative edge
Channel selectthree bits address all eight outputs
Start uppower on reset
Package optionsDW small outline, N plastic DIP
Document age1995, so the timing table is the authority

Points to check before this part goes on a BOM

The half buffered output is the limitation that decides the application. A half buffered stage drives a high impedance load well and a heavy load badly, so a channel that drives a 10 kohm input is fine while the same channel driving a 1 kohm load loses range and linearity. The load resistance belongs in the error budget rather than in a footnote.

The 2 times range option is what makes a 3 V supply useful. With a 1.25 V reference the 1 times range gives 1.25 V full scale and the 2 times range gives 2.5 V, so a board with only 3 V available can still reach a 2.5 V setpoint. The cost is that the reference has to be clean, since the output follows it directly.

Double buffering with LDAC is the feature that makes eight channels usable for a coordinated action. Each channel is loaded separately and none of them moves until the LDAC pulse, so eight gain or offset values step together. On a board where the channels trim the same analog block, that simultaneity is what prevents a transient between updates.

Data is entered on the negative edge of the serial clock, and the document dates from 1995, so the setup and hold times are the authority for the interface. A modern microcontroller driving this part at its maximum clock has to meet those numbers, and the usual failure is a serial clock that is too fast for the older timing rather than a wrong word.

Power on reset sets a known start up state, which matters in a system where the converters set bias levels before the controller is ready. A converter without that behaviour can power up at an arbitrary code and drive an amplifier into a rail, and the resulting fault looks like a firmware problem.

The high impedance reference inputs allow a resistor divider or a filtered reference to drive them without a buffer, which saves a component per reference. The trade is that the reference source impedance and the channel loading interact, so a divider with a high value changes its voltage when a channel updates.

Sixteen pins for eight channels is a package density that no current part improves on at this resolution. For a repair or a long life industrial board, that is the reason this order code is still bought, and the SOIC and DIP options keep both an automated and a hand assembly path open.

Where this order code fits

This order code fits digitally controlled gain and offset stages, programmable voltage sources in test equipment, setpoint generation in industrial control, and bias trimming on multi channel analog boards. Eight channels in one 16 pin body with a serial interface is the reason it survives in boards where a modern converter would need eight separate packages. Boards comparing it with a neighbouring part start from our ADC DAC Cross Reference page, and boards replacing a part that has gone end of life start from the Obsolete RF Part Replacement page.

Questions buyers ask

How much current can each output drive? The stage is half buffered, so it drives a high impedance load well and a heavy load poorly. The load resistance is part of the error budget, not a separate specification.

Can all eight outputs change at the same time? Yes, that is what the double buffering and the LDAC terminal provide. Each channel is loaded first and the outputs move together on the LDAC pulse.

What supply does it need? A single rail of 3 to 3.6 V. The 2 times range option is what allows a 2.5 V full scale from that rail.

SUPERB supplies this order code in either package with date codes stated on the offer, and the Pin to Pin Cross Reference page covers what to compare when an older 16 pin converter has to be replaced.