Contact Us

NE555DR

Brand: Texas Instruments
Texas Instruments NE555DR is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

NE555DR — Power Management & Signal Chain | Superb Automation

NE555DR

Texas Instruments — Power Management & Signal Chain

Product Overview

The NE555DR from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

NE555DR: single precision timer in an 8-pin SOIC, 4.5 V to 16 V supply

NE555DR is a single bipolar timer that produces delays and oscillations from one resistor and one capacitor in a SOIC body of 8 pins. The NE555 is the commercial grade of a timer that has been in production for five decades, and the DR code is the 8-pin SOIC on tape and reel. The supply range is 4.5 V to 16 V, the output stage sinks and sources 200 mA, and the timing comes from one resistor and one capacitor with the threshold at two thirds of the supply and the trigger at one third. The same part also runs as a Schmitt trigger, a one shot or an oscillator without any change to the pinout.

Order code and package

Order codeNE555DR
Functionsingle precision timer
PackageSOIC, 8 pins, body code D
Supply range4.5 V to 16 V for the NE555, 18 V maximum for the SE555 grade
Output current200 mA sink and source
Thresholdtwo thirds of the supply
Triggerone third of the supply
Timingset by one resistor and one capacitor, from microseconds to hours
Modesmonostable, astable, bistable and Schmitt trigger
Reset pinactive low, forces the output low regardless of the inputs
DatasheetSLFS022, NA555, NE555, SA555 and SE555 families

Electrical parameters that decide the application

Supply current3 mA typical at 5 V with a 5 mA maximum, and about 10 mA at 15 V
Output high at 200 mA3.3 V minimum on a 15 V supply, which is a 1.7 V drop in the output stage
Output low10 mV to 12 mV with no load at 15 V, 3 mV to 6 mV at 5 V
Monostable period1.1 times the product of the timing resistor and capacitor
Astable frequency1.44 divided by the product of the capacitor and the sum of the two resistors
Maximum timing resistance3.4 megohm at 5 V, 10 megohm at 15 V
Temperature grade0 C to 70 C for the NE555, wider for the NA and SE grades
Output configurationtotem pole, so it drives a load to either rail
Discharge transistoropen collector to the discharge pin, used by the timing capacitor
Control voltage pinexposed, so the threshold can be modulated or bypassed

Points to check before this part goes on a BOM

The 200 mA output rating is a current capability, not a clean rail to rail switch. At 200 mA on a 15 V supply the guaranteed high level is 3.3 V, so the output stage drops 1.7 V and dissipates 0.34 W inside the package. Driving a relay coil or a small lamp directly works, and the package temperature rise is the limit rather than the current.

Supply current is not small. 3 mA typical at 5 V and about 10 mA at 15 V means the timer costs more than a modern microcontroller in standby, so a battery product that needs a timer does not use this part for a one second blink unless the blink is the whole product.

Timing accuracy comes from the external parts, not from the timer. The monostable period is 1.1 times the product of resistance and capacitance, so a 100 kilohm resistor and a 1 microfarad capacitor give 110 ms, and a 5 percent capacitor plus a 1 percent resistor is a 6 percent period before the internal comparator offset is counted.

The control voltage pin is the internal two thirds reference brought out. Bypassing it with 10 nF is standard practice, and driving it with an external voltage changes the threshold and therefore the timing, which is how this part is used as a voltage to pulse width converter.

The discharge transistor is open collector, so the timing capacitor discharges through the external resistor and the pin, and the discharge current rating limits how small the timing resistor can be. Below a few hundred ohms the discharge current exceeds the rating and the period is no longer the calculated value.

The reset pin is active low and dominates the output. Leaving it floating is a known cause of intermittent behaviour on old boards, because the internal pull-up is weak and a nearby switching node couples into the pin. Tying it to the supply through 10 kilohm is the usual fix.

Where this order code fits

Missing pulse detection, debounce, power on delay, LED flashing and simple pulse width modulation are the jobs this part still does, mostly because the behaviour is understood by every technician and the external component count is two. Boards comparing it with a neighbouring part start from our Power Management Cross Reference page, and boards replacing a part that has gone end of life start from the Component Lead Time Solutions page.

Questions buyers ask

What is the difference between NE555 and SE555? Temperature grade and supply ceiling. The NE555 is 0 C to 70 C and 16 V, the SE555 covers the military temperature range and takes 18 V. The timer behaviour is the same.

Can it drive a relay directly? A small relay coil of a few tens of milliamps, yes, with a catch diode across the coil. At 200 mA the output drops 1.7 V and the package dissipates a third of a watt.

How accurate is the timing? It is set by the external resistor and capacitor, and the internal comparator adds a small offset. For a repeatable period use a 1 percent resistor and a 2 percent capacitor, and expect the first cycle to differ because the capacitor starts from zero.

SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the How to Reduce Component Cost page sets out the checks that keep a substitute from failing on the bench.