Contact Us

INA181A1QDBVRQ1

Brand: Texas Instruments
Texas Instruments INA181A1QDBVRQ1 is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA181A1QDBVRQ1 — Power Management & Signal Chain | Superb Automation

INA181A1QDBVRQ1

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA181A1QDBVRQ1 from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA181A1QDBVRQ1: 20 V/V automotive current sense amplifier in a 6-pin SOT-23

INA181A1QDBVRQ1 is a bidirectional current shunt monitor with a fixed 20 V/V gain in a SOT-23 body of 6 pins. It measures the drop across a shunt at common mode voltages from 0.2 V below ground to 26 V, independent of its own 2.7 V to 5.5 V supply, and it converts that drop to a voltage an ADC can read. The Q1 order code is the automotive qualified member of the INA181 family, and A1 marks the 20 V/V gain option rather than a different die.

Order code and package

Order codeINA181A1QDBVRQ1
Functionbidirectional current shunt monitor, fixed gain
Gain20 V/V, set by the A1 suffix
PackageSOT-23, 6 pins, 2.90 mm by 2.80 mm
Qualificationautomotive qualified Q1 order code
Common mode0.2 V below ground to 26 V, independent of supply
Supply2.7 V to 5.5 V single rail
Outputvoltage output, referenced to the REF pin
Channelsone, in this body
Temperature rangeminus 40 to plus 125 C
DatasheetSBOS793 revision H, November 2023
FamilyINA181 single, INA2181 dual, INA4181 quad

Electrical parameters that decide the application

Offset voltage150 microvolts maximum at a common mode of 0 V, 500 microvolts maximum at 12 V
Offset drift1 microvolt per C maximum
Gain error1 percent maximum over the full temperature range
Common mode rejectionset by the matched resistor network on the die, not by an external pair
Bandwidth350 kHz on the A1 gain option, the widest of the four gains
Slew rate2 volts per microsecond
Quiescent current260 microamps maximum on the single channel part
Gain options20, 50, 100 and 200 V/V across A1 to A4
Input biaslow enough that a 10 ohm shunt does not load the measurement
Output swingrail to rail within 30 mV of each rail at light load

Points to check before this part goes on a BOM

The offset is quoted at two common mode voltages and the gap between them is the number that matters. 150 microvolts at 0 V becomes 500 microvolts at a 12 V bus, so a 12 V rail moves the reading by more than three times what a bench test at ground suggests.

At 20 V/V, a 500 microvolt input offset lands as 10 millivolts at the output. Across a 10 milliohm shunt that is 50 milliamps of apparent current, which is the floor of any low current measurement on this gain option.

The Q1 order code is not a different silicon specification with a new feature list. The gain, offset and drift numbers in this table are the ones printed in the family document, and the buyer should ask for the automotive qualification document separately if the harness or the ECU needs it.

The REF pin sets what zero current reads as. Tying it to ground gives a one directional output, and driving it from a divider or a reference gives a bidirectional window that can show regenerative current on a motor phase. The pin has to be driven from a low impedance source or the gain error moves.

Four gain options share one die, so the A1 to A4 suffix decides the full scale before the shunt is chosen. At 26 V common mode and 20 V/V, a 5 V output range allows 250 millivolts across the shunt, which caps the shunt at 5 milliohms for a 50 amp load.

The 26 V common mode limit is below where a 48 V rail sits, even with the 0.2 V below ground capability. A 48 V system needs a different family member rather than a divider in front of this part.

Where this order code fits

Boards that put this part on a 12 V motor phase or a battery return come to us with the whole BOM, because the shunt, the filter and the ADC usually move with it. Boards comparing it with a neighbouring part start from our Amplifier Cross Reference page, and boards replacing a part that has gone end of life start from the Component Lead Time Solutions page.

Questions buyers ask

Does the automotive order code change the analogue behaviour? No. The gain, offset, drift and common mode numbers in this table are the family document numbers; the Q1 suffix adds the qualification and the order code, not a new transfer function.

Can it measure current in both directions? Yes, if the REF pin is biased above ground. A ground referenced REF gives a single quadrant output, and a mid supply REF gives a window that crosses zero current.

SUPERB holds and sources this Texas Instruments line for production and repair demand, quoted against the exact ordering string with date codes, packing and country of origin stated on the offer. When a line is moving, the Incoming Inspection Plan page sets out the checks that keep a substitute from failing on the bench.