Contact Us

INA133U

Brand: Texas Instruments
Texas Instruments INA133U is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA133U — Power Management & Signal Chain | Superb Automation

INA133U

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA133U from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA133U: the plain grade eight pin SOIC in a tube, at 1.5 MHz and 900 microvolts

The INA133U is the plain grade of the fast unity gain difference amplifier in a 75 piece tube. It is the tight bin of the family: 450 µV maximum offset referred to the output against 900 on the UA grade, 0.05 per cent gain error against 0.1, and 80 dB of minimum common mode rejection against 74. The body is the eight pin SOIC at 4.9 by 6 mm, the network is four 25 kΩ resistors, and the gain is fixed at 1 V/V.

What separates it from the slower INA132 is bandwidth and common mode range: 1.5 MHz small signal, 5.5 microseconds of settling to 0.01 per cent, and an input window that reaches 2 times each supply minus 3 V, so a shunt in a motor leg or a battery string sits inside the window without a level shift. Quiescent current is 950 µA, five times the slower part, which is the price of the speed.

The INA133U rows as the addendum publishes them

Part classHigh speed unity gain difference amplifier, trimmed 25 kΩ network
Vendor statusActive, production
Data sheetSBOS115B, revised January 2026, shared with the INA2133
Addendum rowINA133U, 75 pieces per tube
GradeU bin, 450 µV maximum offset, 0.05 per cent gain error
Gain1 V/V fixed
Input offset voltage450 µV maximum referred to the output at plus or minus 15 V, 750 at plus or minus 5 V
Offset drift5 µV per degree maximum
Common mode rejection80 dB minimum, 90 dB typical
Input impedance50 kΩ differential, 25 kΩ common mode
Common mode range2 times each supply minus 3 V
Bandwidth1.5 MHz small signal
Slew rate5 V per microsecond on the SHE flow, 20 on the RFB flow
Settling5.5 µs to 0.01 per cent
OutputWithin 1.5 V of each rail under a gain error condition, 1000 pF stable
Supply rangePlus or minus 2.25 V to plus or minus 18 V, 4.5 V to 36 V single
Quiescent current950 µA typical
BodySOIC, D outline, 8 pins, 4.9 by 6 mm
Moisture levelLevel 3, 260 degrees, 168 hour floor life
Temperature rangeMinus 40 to plus 85 degrees

1.5 MHz at unity gain from a difference amplifier

INA133U is the fast member of the unity gain difference amplifier group: 1.5 MHz of small signal bandwidth against the 300 kHz of the INA132, with the same on-chip resistor network and the same eight pin body. The bandwidth is what a servo feedback path or a string inverter current loop needs, because a 20 kHz loop with 60 degrees of phase margin wants an amplifier an order of magnitude faster than the loop, and a 300 kHz part leaves no margin.

The network is four 25 kohm resistors trimmed as a set, giving a differential input impedance of 50 kohm and a common mode impedance of 25 kohm. Gain is fixed at 1 V/V, gain error is 0.05 per cent maximum on the U bin and 0.1 per cent on the UA bin, and nonlinearity is 0.001 and 0.002 per cent of full scale. At unity gain the offset is quoted referred to the output, so the input and output numbers are the same.

Two chip origins, and 5 against 20 volts per microsecond

The same part number can arrive from two fabrication flows, and the vendor labels the difference by chip site origin. On INA133U the slew rate is 5 volts per microsecond on the SHE flow and 20 volts per microsecond on the RFB flow, a factor of four on a row that no distributor listing shows. Voltage noise moves the other way: 57 nanovolts per root hertz at 1 kHz on SHE and 20 on RFB, and the common mode rejection minimum moves from 80 to 74 dB between the U and UA bins on top of that.

For a servo loop running at a few kilohertz either flow is fine. For a channel that has to settle in a few microseconds after a multiplexer step, the 5 volt per microsecond flow is a 20 microsecond edge on a 10 V step and the RFB flow is 5 microseconds, which is the difference between a working scan rate and a specification that is met only on paper. The flow is printed on the reel label and in the lot record, not on the part.

450 microvolts on the U and 900 on the UA

The offset window on INA133U is 450 microvolts maximum on the U bin and 900 microvolts on the UA bin at a plus or minus 15 V supply, doubling to 750 and 1500 microvolts at plus or minus 5 V, with a drift of 5 microvolts per degree on both. The supply dependence is unusual and worth reading twice: the same part is twice as loose on a 10 V total supply as on 30 V, so a 5 V single rail application starts with a 1.5 mV window on the UA bin.

Because the offset is referred to the output and the gain is one, a 900 microvolt offset is 900 microvolts at the output, which against a 2 V full scale is 0.045 per cent and against a 100 mV shunt signal is 0.9 per cent. On a shunt monitor that is a real error and it is why the U bin exists; on a servo feedback path it is trimmed by the loop. Long term stability is 0.3 microvolts per month on both bins.

A common mode range of twice the supply, minus three volts

The input common mode range of INA133U extends beyond both rails: from 2 times the negative rail plus 3 V to 2 times the positive rail minus 3 V. On a plus or minus 15 V supply that is minus 27 V to plus 27 V, and on a plus or minus 5 V supply it is minus 7 V to plus 7 V. The absolute maximum input is 80 V, so the part survives a common mode it cannot measure, which is the useful half of the specification on an industrial rack where a transducer cable can pick up a fault voltage.

That range is what allows the part to sit directly across a shunt in a motor leg or a battery string, where the common mode is neither near ground nor inside the supply. It also means the inputs are not protected by the supply rails: a 40 V common mode on a plus or minus 5 V supply is inside the input window and outside the supply, and the output will do something the loop may not expect. The window has to be checked against the supply, not assumed from it.

The 25 kohm network loads the source and unbalances it

Each input of INA133U sees 25 kohm to the amplifier, and the differential pair presents 50 kohm. Across a 100 ohm shunt that is a 0.2 per cent gain loss, which is larger than the 0.05 per cent gain error row and has to be calibrated. Across a 10 kohm source the loss is 17 per cent and the whole measurement is a divider, which is the point at which a buffer belongs in front of the part rather than after it.

The network is ratio matched, so the loading is common to both inputs and cancels as long as the source impedances match. A protection resistor in one leg, a connector with different contact resistance, or a filter capacitor on one side breaks that match and converts common mode into a differential error. On a board the two input traces should be the same length, the same width and the same distance from any plane, which is ordinary practice for a differential pair and easy to forget on a DC channel.

950 microamps, 5.5 microseconds and the dual INA2133

Quiescent current on INA133U is 950 microamps typical, which is five times the INA132 and the price of the 1.5 MHz bandwidth. Settling to 0.01 per cent takes 5.5 microseconds, short circuit current is 32 mA source and 25 mA sink on the SHE flow and 70 mA both ways on RFB, and the output is stable into 1000 pF. Output swing stops 1.5 V short of each rail under a gain error condition, which on plus or minus 15 V leaves plus or minus 13.5 V of usable range.

The single channel is the eight pin SOIC. The dual INA2133 is the fourteen pin SOIC with two independent channels at 8.65 by 6 mm, sold in 50 piece tubes, and it is specified over minus 55 to plus 125 degrees rather than the minus 40 to plus 85 of the single. On a multi channel board the dual saves one package and one reel but costs board area, and the wider temperature range is worth having when the board sits near a heatsink.

Buying INA133U

A 75 piece tube is the pilot build quantity, and the reel row at 2500 is the production quantity, both active and both at level 3 moisture. The grade decision is the one to take deliberately: the U bin costs more and halves the offset and the gain error, and on a servo feedback path neither matters, while on a shunt monitor both do.

The chip origin is the hidden variable. Slew rate is 5 V per microsecond on one flow and 20 on the other, and voltage noise is 57 against 20 nV per root hertz, so a channel that needs a fast edge has to be specified against the flow rather than against the part number. Our amplifier cross reference page lists what we compare when a second source is needed.

Questions that arrive with this part number

Whether the U and UA grades are the same die is the first question, and they are, with the offset and gain error windows as the difference. Whether the part can replace the INA132 in a socket is the second, and it can, because the pin out and the gain are the same; the differences are five times the supply current, five times the bandwidth and a wider common mode range.

The third is the input loading. Twenty five kΩ per input means a 1 kΩ source loses 4 per cent, which is eighty times the gain error and has to be calibrated. The fourth is the output swing: 1.5 V from each rail is not rail to rail, and on a plus or minus 5 V supply that leaves about 7 V of usable span inside a 10 V window.