Contact Us

INA106U

Brand: Texas Instruments
Texas Instruments INA106U is a power management component designed for Industrial Automation and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

INA106U — Power Management & Signal Chain | Superb Automation

INA106U

Texas Instruments — Power Management & Signal Chain

Product Overview

The INA106U from Texas Instruments is a power management / signal chain IC delivering high efficiency, precision regulation, and robust protection. Texas Instruments (TI) is a global leader in analog ICs, power management solutions, and embedded processors.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • High-efficiency power conversion with low quiescent current
  • Wide input voltage range with precision output regulation
  • Integrated over-current, over-temperature, and short-circuit protection
  • Small footprint packaging for space-constrained designs
  • AEC-Q100 qualified options available for automotive applications
  • Flexible sequencing and soft-start control

Key Specifications

Input VoltageV
Output VoltageV
Output CurrentA
Switching FrequencykHz
Efficiency%
Quiescent CurrentµA
Topology—
Package—
Operating Temp°C
Protection—

Applications

Industrial Automation Automotive Electronics Telecom Infrastructure Server & Data Center Power Medical Devices Consumer Electronics

Request Quote — In Stock, 100% New & Original, Full Warranty

INA106U: the gain of ten amplifier in an eight pin SOIC

The INA106U is the surface mount version of the INA106, published in a 2500 piece reel and in a tube that the current addendum marks Obsolete. The function is a fixed gain of ten with 86 dB of common mode rejection, 0.025 per cent of gain error and 200 µV of offset, in a body 4.9 by 6.0 millimetres. It is the row a production build should use, because the tube is closed and the reel is the only live carrier.

The part is a good example of a component where the buying decision and the technical decision point the same way: the reel is cheaper per unit than a tube, it is the only live row, and it is level 3 so it needs a moisture plan rather than a bake on arrival.

The INA106U rows as the addendum publishes them

Part classFixed gain differential amplifier, surface mount
Vendor statusACTIVE on the reel row, Obsolete on the tube row
Data sheetSBOS152C, August 1987, revised December 2025
Gain10, fixed
Input offset50 µV typical, 200 µV maximum
Offset drift0.2 µV per degree
Common mode rejection86 dB minimum, 100 dB typical
Gain error0.025 per cent maximum
Gain drift4 ppm per degree
Nonlinearity0.001 per cent maximum
Bandwidth0.5 MHz
Full power bandwidth400 kHz at 20 V peak to peak
Slew rate2 V per microsecond typical
Settling to 0.1 per cent5 µs
Differential input impedance10 kΩ
Common mode rangePlus or minus 11 V
OutputPlus or minus 10 V at 5 mA
Quiescent current1.5 mA typical, 2 mA maximum
Supply rangePlus or minus 6 V to plus or minus 18 V
BodySOIC, 8 pins, 4.90 by 6.00 millimetres
Reel rowINA106U/2K5, 2500 pieces, large tape and reel, Active
Tube rowINA106U, no quantity, call vendor, Obsolete
Moisture levelLevel 3 at 260 degrees, 168 hours floor life
MarkingINA 106U, with a space, as printed in the addendum
Temperature rangeMinus 40 to plus 85 degrees

Two details are easy to miss. The reel string is INA106U/2K5, where the 2K5 is 2500 pieces, and the bare string INA106U now resolves to an obsolete tube row with no quantity. A purchase order written against the bare string will be rejected or back ordered, and the fix is a string change rather than a new supplier.

Using a fixed gain part well

A fixed gain of ten removes the gain resistor from the error budget, which is why the gain error is 0.025 per cent rather than the 0.1 per cent of a resistor programmed part. The remaining errors are offset, drift and the source impedance divider. On a 100 mV full scale signal, 200 µV of offset is 0.2 per cent, and 0.2 µV per degree over a 60 degree swing is another 12 µV or 0.012 per cent. The offset dominates, and it can be trimmed at the reference pin if the circuit allows a one point calibration.

The common mode rejection of 86 dB is specified with a zero source impedance. A 1 kΩ imbalance in the source reduces it by roughly 6 dB, and a 10 kΩ imbalance removes most of it. In a battery test rack where eight cells are measured in series, the source impedances are usually matched by construction, so the rejection holds.

Settling and scan rate

A 5 µs settling time to 0.1 per cent limits a multiplexed scanner to about 200 kilo samples per second, which is far beyond what a battery formation rack needs and close to what a servo current loop wants. At a 20 kHz loop rate the settling is a small fraction of the period, so the amplifier is not the limit.

The full power bandwidth of 400 kHz at 20 V peak to peak is where the slew rate becomes visible. A servo drive that demands a full scale step every 20 µs is inside the limit; one that demands it every 5 µs is not, and the output will show a triangular rather than a square response.

Thermal and board notes

The eight pin SOIC dissipates a quarter of a watt at most, so the junction rise is modest and the offset drift from self heating is small. The part has no exposed pad, so the board is a conventional eight pin footprint with no thermal via requirement, which keeps the assembly simple.

Because the input resistors are on the die and their value is 10 kΩ, the input traces should be short and, where possible, guarded by a trace at the same potential. A high impedance node at 10 kΩ on a board with a switching supply nearby will pick up noise, and the amplifier will faithfully amplify it.

Buying INA106U

One live carrier, 2500 pieces at level 3. For a rack that uses eight per board and builds a hundred boards a year, that is three years of supply, which is a comfortable but not excessive buy. The level 3 window means the reel needs a bake if it is opened and closed over more than 168 hours, and a large reel used slowly will exceed that.

The obsolete tube row is a trap for service organisations. A repair depot that buys 25 pieces at a time has to move to the reel, and a distributor broken reel with a bake record is the practical answer for a small annual demand.

Questions that arrive with this part number

Whether the /2K5 suffix is a grade is the first question, and it is a quantity rather than a grade. The second is whether the surface mount and DIP parts are electrically identical. They are the same function with the same grades, and the difference is the package and the thermal path.

The third is whether the part can be used for a high side current sense on a 24 V rail. It cannot, because the common mode range is plus or minus 11 V, and the correct part for that job has a much wider input window.

The reference pin is the one external connection that can improve the accuracy for free. Tying it to the converter reference rather than to ground makes the amplifier output ratiometric with the conversion, so the reference drift cancels in the reading. A 0.1 per cent reference and a 0.025 per cent gain error then leave the offset as the dominant term, and that can be trimmed at the same node with a divider.

The lead finish is nickel palladium gold, which is the finish this family has used since before the lead free transition. It wets well with both tin lead and lead free solder, so a board that is still on a tin lead process can take the part without a finish change, and a board on lead free can take it without a bake beyond the level 3 window.

Storage is the last item. A 2500 piece reel consumed over three years will be opened and closed many times, and each opening starts the 168 hour clock again only if the parts are returned to a dry pack. A reel left in a drawer between builds will need a bake before every use, which is a schedule cost that rarely appears in the unit price comparison.

A last point on the obsolete tube row: a purchase order that still quotes the bare string will be rejected, and the correction is a string change to the 2K5 reel rather than a new supplier.

For a programme that is moving from the tube to the reel, the incoming inspection plan covers the marking and label check, and the kitting page explains how a broken reel is returned under a moisture barrier bag.