STM8S207SBT6
Product Specifications
STM8S207SBT6
ST — MCU & Embedded Processors
Product Overview
The STM8S207SBT6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM8S207SBT6: 128 Kbyte Flash STM8S MCU in LQFP44
STM8S207SBT6 is the 128 Kbyte Flash member of the STM8S 8-bit line in a LQFP44 body (10 by 10 mm), with 1536 bytes of true data EEPROM, 6 Kbyte of RAM, 34 general purpose I/O, 9 analog inputs and 15 high sink outputs. The core runs at up to 24 MHz and the supply range is 2.95 to 5.5 V. There is no controller area network block in this order code; the CAN member of the same body is listed in the cross reference.
Order code and memory
| Order code | STM8S207SBT6 |
| Program Flash | 128 Kbytes |
| Data EEPROM | 1536 bytes, 300 kcycle endurance |
| RAM | 6 Kbytes |
| Package | LQFP44, 10 by 10 mm |
| Pin count | 44 |
| Maximum general purpose I/O | 34 |
| External interrupt pins | 31 |
| High sink outputs | 15 |
| ADC channels | 9 of 16 |
| Controller area network | not present |
| Temperature grade | suffix 6, minus 40 to plus 85 C |
Electrical and peripheral parameters
| Supply voltage | 2.95 to 5.5 V |
| Maximum CPU clock | 24 MHz up to 105 C ambient |
| Flash access | zero wait states to 16 MHz |
| Core | Harvard, 3 stage pipeline, 80 instructions, 20 addressing modes |
| Timers | advanced control timer with 4 CAPCOM channels and 3 complementary outputs, two 16-bit general purpose timers with 2 and 3 channels, 8-bit basic timer |
| Analog to digital converter | 10-bit, 9 channels, scan mode, analog watchdog, 14 clock cycles per conversion |
| ADC clock | 1 to 4 MHz with VDDA 3 to 5.5 V, 6 MHz above 4.5 V |
| Serial interfaces | UART at up to 1 Mbit/s with LIN master mode, SPI up to 10 Mbit/s, I2C up to 400 kHz |
| Run current | 11.0 mA typical at 24 MHz from Flash on 3.3 V, 18 mA maximum |
| Low power | halt 6.5 uA typical at 5 V, active halt 200 uA with the main regulator on and 11 uA with it off |
| Reset | power-on reset 2.65 to 2.88 V, brown-out reset 2.58 to 2.73 V, 70 mV hysteresis |
| Identification | 96-bit unique ID, single wire interface module for debug and programming |
Points to check before this part goes on a BOM
This line and the T6C line resolve to the same 128 Kbyte 44-pin device, so the two pages exist for different ordering strings rather than different parts. A buyer comparing them should compare price and availability at the full string level, and a substitution between them is a documentation change, not a hardware change.
128 Kbytes of Flash with 6 Kbytes of RAM means the firmware image is the resource that grows and the working set is fixed. Constants and lookup tables can be large, buffers cannot, and a 24 MHz part reading 128 Kbytes of Flash uses one wait state on every fetch unless the code is moved to RAM.
The 44-pin body carries 1536 bytes of EEPROM, which is 512 bytes more than the 32 Kbyte member and 512 less than the 80-pin 128 Kbyte part. Applications that keep a calibration record per channel usually fit in 1536 bytes until the channel count passes about twenty.
Where this order code fits
Field instruments and controllers with a fixed, large program image and a 10 by 10 mm board outline, including products that were ported from a larger package to cut board cost. Firmware teams comparing it against a neighbouring memory size or pin count usually start from our MCU Cross Reference page, and teams replacing a part that has gone end of life start from the Component Obsolescence Management page. Both list the resource differences that decide the choice before any code is written.
Questions buyers ask
Is this the same part as STM8S207SBT6C? It is the same device under a different ordering string. Both are 128 Kbyte, 44-pin, 1536 byte EEPROM parts, and the trailing letter is matched with the packing label.
How does 128 Kbyte affect startup? The device starts on the internal 16 MHz RC oscillator divided by 8, at 2 MHz, before the clock tree is programmed. A 128 Kbyte image does not change that sequence, only the time to reach the application entry point.
What is the wakeup time from halt? 52 to 54 microseconds with Flash in operating mode, plus one LSI clock depending on synchronization.
SUPERB holds and sources ST microcontroller lines like this one for production and repair demand, with date codes, packing and quantity breaks quoted against the exact ordering string rather than the base name. When a line is changing, the Strategic Sourcing page walks through the checks that keep a substitute from failing on the bench.