Contact Us

STM8S105S4T6C

Brand: ST
ST STM8S105S4T6C is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM8S105S4T6C — MCU & Embedded Processors | Superb Automation

STM8S105S4T6C

ST — MCU & Embedded Processors

Product Overview

The STM8S105S4T6C from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM8S105S4T6C: 16 Kbyte 5 V STM8S access line MCU in LQFP44

STM8S105S4T6C is the 16 Kbyte member of the STM8S105 access line in a LQFP44 body (10 by 10 mm), with 1 Kbyte of true data EEPROM, 2 Kbytes of RAM, 34 general purpose I/O, 31 external interrupt inputs, 8 capture compare channels, 15 high sink outputs and 9 analog inputs. The supply range is 2.95 to 5.5 V, the core runs at up to 16 MHz with zero wait state Flash access, and the converter is 10 bit with its own reference pins.

Order code and memory

Order codeSTM8S105S4T6C
Program Flash16 Kbytes
Data EEPROM1 Kbyte, 300 kcycle endurance
RAM2 Kbytes
PackageLQFP44, 10 by 10 mm
Pin count44
Maximum general purpose I/O34
External interrupt pins31
Timer capture compare channels8
ADC channels9 of the 10 channel converter
High sink outputs15
Temperature gradesuffix 6, minus 40 to plus 85 C

Electrical and peripheral parameters

Supply voltage2.95 to 5.5 V
Maximum CPU clock16 MHz with zero wait state Flash access
Run current7.7 mA typical at 16 MHz from Flash on 5 V, 3.2 mA with the loop in RAM
Halt current6.5 uA typical at 5 V, 25 uA maximum at 85 C and 80 uA at 125 C
Active haltwait, active halt and halt modes, with the auto wakeup unit
Low power modesperipheral clocks can be switched off one by one
Wake up time7 microseconds from halt
Analog to digital converter10 bit, 9 channels, VREF+ and VREF- pins, 14 clock cycles per conversion
Digital to analog converternot present
Comparatorsnot present on this line
Timersone 16 bit advanced control timer with four capture compare channels and three complementary outputs, two 16 bit general purpose timers with five channels between them, one 8 bit basic timer, auto wakeup timer, window and independent watchdog
Serial interfacesUART with LIN master, SmartCard and IrDA, SPI up to 8 Mbit/s, I2C up to 400 kHz
DMAnot present on this line
Data EEPROM endurance300 kcycle for the 1 Kbyte true data EEPROM
Program memory endurance10 kcycle, 20 years retention at 55 C
Identification96 bit unique ID, single wire interface module, option byte read out protection

Points to check before this part goes on a BOM

The S4 is the 44 pin, 16 Kbyte access line part, and the letter S in the STM8S ordering string maps to the 10 by 10 mm LQFP44 body rather than to the 7 by 7 mm 48 pin package. That size difference matters on a densely packed board, but the electrical difference is smaller: 34 port pins instead of 38, 31 external interrupt inputs instead of 35, nine converter channels instead of ten and 15 high sink outputs instead of 16. Everything else follows the family.

Because the 44 pin body keeps the advanced control timer with four capture compare channels and three complementary outputs with dead time insertion, this part can drive a three phase bridge directly, with the general purpose timers handling encoder capture and the 8 bit timer running the system tick. The complementary outputs also have a break input, which is the hardware path that turns off the bridge when a fault pin goes low, and it works without core intervention.

The trailing C in T6C is not a memory or temperature code. It belongs to the ordering string and is read with the reel label, so a buyer matching this line item should match the full string rather than the base name plus a package letter. Two parts that differ only by that letter are electrically the same device, but a line item mismatch is enough to hold an incoming inspection.

Where this order code fits

Three phase motor drives, pump and fan controllers, industrial timers and relay modules where the 5 V rail and the complementary PWM outputs are the deciding features. Teams comparing it against a neighbouring memory size or pin count start from our MCU Cross Reference page, and teams replacing a line that has gone end of life start from the BOM Shortage Recovery page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

What does the S package letter mean? A 10 by 10 mm LQFP44 body. The C letter is the 7 by 7 mm 48 pin body and K is the 7 by 7 mm 32 pin body on this line.

Can it drive a three phase bridge? Yes, through the advanced control timer with three complementary outputs, dead time insertion and a break input that disables the outputs in hardware.

Is the RAM really 2 Kbytes on the 16 Kbyte part? Yes. Table 1 of DS5855 gives 2 Kbytes of RAM for all six order codes in the line, so the 16 and 32 Kbyte parts differ only in the program array.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Vendor Consolidation page sets out the checks that keep a substitute from failing on the bench.