Contact Us

STM32L4S5QII6

Brand: ST
STM32L4S5QII6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32L4S5QII6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32L4S5QII6 — ARM Cortex-M4F Microcontroller by STMicroelectronics

The STM32L4S5QII6 is an STMicroelectronics ARM Cortex-M4F MCU in UFBGA-132(7x7) for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32L4S5QII6Full Part NumberSTMicroelectronics ARM Cortex-M4F Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
L4SeriesARM Cortex-M4F based MCU — L4 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32L4S5QII6
CoreARM Cortex-M4F
PackageUFBGA-132(7x7)
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32L4S5QII6 is an STMicroelectronics ARM Cortex-M4F microcontroller in UFBGA-132(7x7) package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M4F Core — Efficient Processing for Embedded Control

The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32L4S5QII6 supported by STM32CubeIDE?

Yes, the STM32L4S5QII6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32L4S5QII6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32L4S5QII6: 2 Mbytes of flash, 640 Kbytes of RAM and a MIPI display interface below 2 volts

The L4S5 is the top of the ultra-low-power L4 line and the only branch that pairs a display serial interface with the low power core. Q is the 132 pin ball grid array body, I is the 2 Mbyte density, 6 is minus 40 to plus 85 degrees C, and the leading S5 marks the subfamily with the graphics accelerators. The same family ships at 512 Kbytes and 1 Mbyte, in 100, 132, 144 and 169 pin bodies, so both letters in the middle of the string carry real information.

The core is a Cortex-M4 with floating point at up to 120 MHz, quoted at 150 DMIPS, 409.20 CoreMark and 233 ULPMark CP. Memory is 2 Mbytes of flash in two banks with read while write and 640 Kbytes of SRAM split 192, 64 and 384, with hardware parity on 64 of them. The display path is a TFT controller plus a MIPI display serial interface with two lanes at up to 500 megabits per second each. The figures are read from DS12024 Rev 4.

Order code and the graphics chain

FamilySTM32, 32-bit Arm
LineL4, ultra-low-power Cortex-M4 with FPU
SubfamilyS5, graphics accelerators and display serial interface
Pin countQ, 132 balls
FlashI, 2 Mbytes in two banks with read while write
SRAM640 Kbytes including 64 with parity
PackageUFBGA132 at 7 mm by 7 mm
Temperature6, minus 40 to plus 85 degrees C
Supply1.71 V to 3.6 V
Core clock120 MHz, 150 DMIPS
DisplayTFT controller plus two lane MIPI DSI at 500 megabits per second per lane
GraphicsChrom-ART accelerator and Chrom-GRC memory management
SecurityAES and HASH accelerators
Memory interfaceTwo Octo-SPI ports and a controller for static memories
Low power305 nanoamps in VBAT, 33 in shutdown, 125 in standby, 2.8 microamps in stop 2 with RTC

Why a display interface belongs on a low power part

A handheld instrument with a colour panel spends most of its energy on the panel and its backlight, not on the processor. Driving the panel from a serial interface with two lanes removes the parallel bus and its sixteen data lines, which reduces the pin count and the switching current at the same time. The Chrom-GRC block maps a small internal buffer onto a larger virtual frame, so a 480 by 480 panel does not need a full frame buffer in SRAM; ST states up to twenty percent of graphics memory saved.

The 640 Kbytes of SRAM is what makes a partial update scheme workable. Two buffers, one being composed and one being scanned out, fit without external memory, and the panel keeps its content while the core sleeps because the display controller runs from the same clock tree.

Security and firmware on a connected instrument

The AES and HASH blocks cover a firmware image check and an encrypted link. The readout protection and the proprietary code protection are what keep a service technician from reading the calibration constants and the algorithm out of a returned unit. On a medical or a payment terminal, that is a requirement from the customer rather than a feature.

The two Octo-SPI ports are the expansion route: one holds a serial NOR for code, the other a HyperRAM for a scrolling buffer. Both run at up to 140 MHz in single data rate mode and 110 MHz in double data rate, which is fast enough for a display refresh from external memory when the internal array is used for the application.

What a 0.5 mm ball grid array demands

A 132 ball package at 7 mm by 7 mm needs a via fan out and a controlled paste print. It is not a hand assembly part, and it is not a two layer board part once the display and the Octo-SPI bus are routed. We check the packing and the moisture level, and we treat the reflow profile as part of the process rather than as a supplier document. The tooling and stencil control page covers the stencil and the aperture, the memory cross reference page lists the serial memories that pair with the Octo-SPI ports, and the incoming inspection plan page shows the checks on a ball grid array lot.