STM32L476RET6
Product Specifications
STM32L476RET6
ST — MCU & Embedded Processors
Product Overview
The STM32L476RET6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.
Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.
Key Features
- ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
- Integrated flash memory and SRAM for efficient code execution
- Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
- Low-power modes for battery-operated and energy-sensitive applications
- Hardware security features: secure boot, crypto accelerator, TRNG
- Extensive development ecosystem with IDE, HAL, and RTOS support
Key Specifications
| Core | — |
| Max Frequency | MHz |
| Flash | KB |
| SRAM | KB |
| GPIO | — |
| ADC | bits |
| Interfaces | — |
| Supply Voltage | V |
| Operating Temp | °C |
| Package | — |
Applications
Request Quote — In Stock, 100% New & Original, Full Warranty
STM32L476RET6: 512 Kbyte, LQFP64 body
STM32L476RET6 is a member of the STM32L476xx low power line with floating point described by DS10198 Rev 11. The order code fixes 512 Kbytes of Flash, 128 Kbytes of SRAM, the LQFP64 body at 10 x 10 mm with 64 pins, 51 general purpose I/O and 16 analog channels, and the core runs at up to 80 MHz from a 1.71 to 3.6 V on VDD and 1.05 to 1.32 V on the VDD12 core rail supply.
Order code and memory
| Order code | STM32L476RET6 |
| Program Flash | 512 Kbytes |
| SRAM | 128 Kbytes |
| Data EEPROM | not present on this line |
| Package | LQFP64, 10 x 10 mm, 64 pins |
| Maximum general purpose I/O | 51 |
| Analog input channels | 16 channels on the 12 bit converter |
| Digital to analog converter | 2 channels of 12 bits |
| Segment LCD driver | 4x44 or 8x40 segments |
| Supply voltage | 1.71 to 3.6 V on VDD and 1.05 to 1.32 V on the VDD12 core rail |
| Maximum CPU clock | 80 MHz |
| Temperature grade | suffix 6, minus 40 to plus 85 C ambient |
| Datasheet | DS10198 Rev 11 |
Peripheral and electrical parameters
| Core | ARM Cortex-M4 with single precision floating point at up to 80 MHz, ART accelerator giving zero wait state execution from flash, 100 DMIPS and 273 CoreMark at 80 MHz, 106 ULPMark PP |
| Clock sources | 4 to 48 MHz crystal oscillator, 32 kHz crystal for the RTC, 16 MHz factory trimmed internal RC, internal 32 kHz RC, internal multispeed 100 kHz to 48 MHz oscillator auto trimmed by the 32 kHz crystal, and three PLLs for the system clock, USB and audio |
| Low power modes | 100 microamps per MHz in LDO mode, 39 microamps per MHz from 3.3 V with the external SMPS, 30 nanoamps in Shutdown, 120 nanoamps in Standby, 420 nanoamps in Standby with the RTC, 1.1 microamps in Stop 2 and 300 nanoamps on the VBAT domain |
| Timers | sixteen timers: two advanced control, two 32 bit and five 16 bit general purpose, two 16 bit basic, two low power timers that run in Stop, the two watchdogs and SysTick |
| Serial interfaces | three SPI blocks plus one Quad SPI, three I2C blocks at 1 Mbit/s with SMBus and PMBus, five USARTs, two UARTs, two SAI audio interfaces, one CAN 2.0B controller, USB OTG full speed, SDMMC and SWPMI |
| Analog | three 12 bit ADCs at 5 Msps with hardware oversampling to 16 bit, two 12 bit DAC channels, two operational amplifiers with programmable gain and two comparators |
| Memory interface | not present on this body |
| Flash and EEPROM endurance | two flash banks with read while write on the 1 Mbyte codes, and 10 years of retention at 85 C quoted for the program memory |
| Thermal resistance junction to ambient | 45 C/W on LQFP64 |
| Input tolerance | most I/O 5 V tolerant, with up to 14 I/O on an independent supply down to 1.08 V |
| Debug port | serial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits |
| Backup domain | the VBAT domain keeps the RTC and the backup registers alive with the main rail off |
| Status | full production per the datasheet cover |
Points to check before this part goes on a BOM
The order code is R for 64 pins, E for 512 Kbytes of Flash, T for the LQFP body and 6 for the industrial range. There is no data EEPROM on this line, so anything that needs non volatile storage is either a flash page managed by the application or an external serial memory part.
128 Kbytes of SRAM in one 64 pin part is what makes a signal chain practical: a sample buffer, a filter state array, a display frame and a protocol stack all fit at once, and the part does not need an external RAM to hold a window of samples while it computes on the last one.
The core is an ARM Cortex-M4 with single precision floating point at 80 MHz, helped by the ART accelerator that gives zero wait state execution from flash. 273 CoreMark at 80 MHz and 106 ULPMark PP in the same device is the combination that makes a battery instrument with real arithmetic possible.
The three 12 bit converters sample at 5 Msps and reach 16 bit through hardware oversampling, so a strain gauge or a thermocouple can be read at high resolution without an external converter. One LSB at 3.3 V and 12 bits is 0.806 millivolts, which is the number that decides whether the analog front end needs a gain stage.
100 microamps per MHz in LDO mode is 8 mA at the full 80 MHz, and 39 microamps per MHz from 3.3 V with the external SMPS is 3.1 mA for the same clock. The SMPS option needs the VDD12 rail and its inductor, so the trade is a few components against more than half the run current.
30 nanoamps in Shutdown, 120 nanoamps in Standby and 420 nanoamps in Standby with the RTC are the states that make a handheld last. Batch acquisition mode lets the part collect converter data while the core is stopped, which is where a duty cycled instrument spends most of its life.
The LQFP64 is rated 45 C/W junction to ambient, so 444 mW at an 85 C ambient against a 105 C junction. At 80 MHz with the SMPS the part is inside that on its own; running the core at full speed from the LDO with the display backlight on is what pushes a small board towards the limit.
There is no external memory controller on this body. A board that needs to address an SRAM or a NOR part has to move to the 100 pin body, where bank 1 of the interface is available, or to the 144 pin body for the full interface. The 64 pin part is the one to choose when the memory stays on chip.
Where this order code fits
It is the 512 Kbyte member of the floating point low power line in a 64 pin body, used on portable instruments that run a signal chain and a display from the same chip. Boards weighing it against a neighbouring density or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the Pin to Pin Cross Reference page. Both list the figures that have to match before a substitute goes on a BOM.
Questions buyers ask
Does it have a data EEPROM? No. This line has no EEPROM array, unlike the STM32L1 and STM32L0 parts. Non volatile storage is a managed flash page or an external serial memory part on the board.
Can the converters really reach 16 bits? Yes, through hardware oversampling of the 12 bit converter at 5 Msps. The effective resolution depends on the oversampling ratio and the noise of the analog front end, so the 16 bit figure is a converter capability and not a system guarantee.
What is the difference between LDO and SMPS mode? LDO mode draws 100 microamps per MHz and needs no external components. SMPS mode draws 39 microamps per MHz from 3.3 V and needs the VDD12 rail with its inductor and capacitors, so it is a board decision made when the power tree is drawn.
How much SRAM does the part have? 128 Kbytes, which is the full SRAM of the family and not a density dependent fraction. The 64 pin body carries the same 128 Kbytes as the 144 pin body.
SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Obsolete Part Cross Reference Hub page sets out the checks that keep a substitute from failing on the bench.