STM32L431CBT6
Product Specifications
STM32L431CBT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32L431CBT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L431CBT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L4 | Series | ARM Cortex-M4F based MCU — L4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L431CBT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L431CBT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L431CBT6 supported by STM32CubeIDE?
Yes, the STM32L431CBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L431CBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L431CBT6: 128 Kbytes of flash, 5 megasample conversion and 48 pins
The L431 is the analog branch of the L4 line: the same 80 MHz Cortex-M4 with floating point as the L433, without the segment LCD driver and without USB, but with a faster converter and a pair of digital to analog channels. C is 48 pins, B is the 128 Kbyte density, T is the low profile quad flat package at 7 mm by 7 mm, and 6 is minus 40 to plus 85 degrees C. The family also ships at 256 Kbytes in the same body, so the density letter is the field to confirm.
The core is quoted at 100 DMIPS and 273.55 CoreMark at 80 MHz. The memory is 128 Kbytes of single bank flash and 64 Kbytes of SRAM, 16 of which carry hardware parity. The converter samples at 5 megasamples per second at 200 microamps per megasample, with hardware oversampling to 16 bits, and there are two 12 bit DAC channels with low power sample and hold. The figures are read from DS11453 Rev 3.
Order code and the analog front end
| Family | STM32, 32-bit Arm |
| Line | L4, ultra-low-power Cortex-M4 with FPU |
| Subfamily | 31, analog and audio without the display driver |
| Pin count | C, 48 pins |
| Flash | B, 128 Kbytes single bank |
| SRAM | 64 Kbytes, 16 with hardware parity |
| Package | T, LQFP 7 mm by 7 mm |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Supply | 1.71 V to 3.6 V |
| Converter | 12 bit ADC at 5 Msamples per second, 200 microamps per megasample, 16 bit by oversampling |
| Outputs | Two 12 bit DAC channels with low power sample and hold |
| Analog support | One operational amplifier with programmable gain, two comparators |
| Serial | CAN, three I2C at 1 Mbit per second, four USART, three SPI plus quad SPI |
| Low power | 28 nanoamps in standby, 8 in shutdown, 1.0 microamp in stop 2, 4 microsecond wakeup |
Five megasamples on a 48 pin body
A current loop that closes at 20 kilohertz needs its samples taken at a fixed interval with little jitter, and a converter that takes 200 nanoseconds per sample leaves most of the period for arithmetic. The 200 microamps per megasample figure is the one that matters in a battery instrument: at a lower rate the converter current falls with the rate rather than staying at a fixed budget, which is unusual and which makes a slow sampling product viable on a small cell.
The two DAC channels are what turn the part into a controller rather than a monitor. A 4 to 20 milliamp loop, a reference for a bridge, or a bias for a sensor all come out of the die, and the sample and hold lets the channel keep its value while the core sleeps, which an external converter usually cannot do without its own supply staying alive.
The 48 pin budget
With 48 pins and a converter that needs its own supply and reference pins, the analog side takes ten lines before any digital function. What remains usually covers one serial port, a programming header, a crystal and a handful of digital inputs. A product that needs two serial buses and a keypad at the same time is at the edge of this body and should look at the 64 pin member of the same family, which keeps the peripheral set.
The 7 mm package is also the practical limit for a two layer board with a ground plane under the analog pins. At this size the converter's own noise floor is set by the return path more than by the die, and a split ground under the analog section is what keeps the last two bits.
What to send with the enquiry
The density, the temperature grade and whether the board uses the DAC channels, because the pin out changes when they are enabled. We confirm the string, the packing and the date code, and we keep the analog support parts on one kit. The ADC and DAC cross reference page covers the converters and references that pair with this family, the MCU cross reference page compares the L4 branches, and the incoming inspection plan page describes the goods in check.