Contact Us

STM32L151CBU6

Brand: ST
ST STM32L151CBU6 is a mcu & embedded component designed for general electronics and related applications. In stock at Superb Automation — request a quote for competitive pricing and fast delivery.
quote now

Product Specifications

STM32L151CBU6 — MCU & Embedded Processors | Superb Automation

STM32L151CBU6

ST — MCU & Embedded Processors

Product Overview

The STM32L151CBU6 from ST is a microcontroller / embedded processor engineered for real-time control, signal processing, and connectivity. STMicroelectronics is a European semiconductor leader with a strong portfolio in MCUs, power management, sensors, and analog ICs.

Superb Automation partners with leading brands including Qorvo, TI, ADI, XILINX, NVIDIA, Intel, ST, MACOM, Renesas, and Coilcraft to provide complete BOM and supply-chain solutions.

Key Features

  • ARM Cortex / RISC-V / proprietary core with high-performance real-time processing
  • Integrated flash memory and SRAM for efficient code execution
  • Rich peripheral set: UART, SPI, I2C, ADC, timers, PWM
  • Low-power modes for battery-operated and energy-sensitive applications
  • Hardware security features: secure boot, crypto accelerator, TRNG
  • Extensive development ecosystem with IDE, HAL, and RTOS support

Key Specifications

Core—
Max FrequencyMHz
FlashKB
SRAMKB
GPIO—
ADCbits
Interfaces—
Supply VoltageV
Operating Temp°C
Package—

Applications

Industrial Motor Control IoT Edge Nodes Consumer Electronics Automotive Body Control Smart Home & Appliances Medical Portable Devices

Request Quote — In Stock, 100% New & Original, Full Warranty

STM32L151CBU6: 128 Kbyte, UFQFPN48 body

STM32L151CBU6 is a member of the STM32L151x6/8/B and STM32L152x6/8/B low power line described by DocID17659 Rev 12. The order code fixes 128 Kbytes of Flash, 16 Kbytes of SRAM, the UFQFPN48 body at 7 x 7 mm with 48 pins, 37 general purpose I/O and 14 analog channels, and the core runs at up to 32 MHz from a 1.65 to 3.6 V with the brownout reset enabled, 1.8 to 3.6 V without it and down to 1.65 V in power down supply.

Order code and memory

Order codeSTM32L151CBU6
Program Flash128 Kbytes
SRAM16 Kbytes
Data EEPROM4 Kbytes with ECC
PackageUFQFPN48, 7 x 7 mm, 48 pins
Maximum general purpose I/O37
Analog input channels14 channels on the 12 bit converter
Digital to analog converternot present
Segment LCD drivernot present on this part
Supply voltage1.65 to 3.6 V with the brownout reset enabled, 1.8 to 3.6 V without it and down to 1.65 V in power down
Maximum CPU clock32 MHz
Temperature gradesuffix 6, minus 40 to plus 85 C ambient
DatasheetDocID17659 Rev 12

Peripheral and electrical parameters

CoreARM Cortex-M3 at up to 32 MHz, 1.25 DMIPS per MHz, memory protection unit
Clock sources1 to 24 MHz crystal oscillator, 32 kHz oscillator for the RTC with calibration, 16 MHz factory trimmed internal RC trimmed to plus or minus 1 percent, internal 37 kHz low power RC, internal multispeed 65 kHz to 4.2 MHz RC, and a PLL that also produces the 48 MHz USB clock
Low power modes214 microamps per MHz in Run mode, 9 microamps in Low power run, 1.2 microamps in Stop with the RTC, 0.9 microamps in Standby with the RTC and 10 nanoamps of I/O leakage, with wakeup from Stop under 8 microseconds
Timersten timers: six 16 bit timers with up to four compare channels each, two 16 bit basic timers and the independent and window watchdogs, plus the SysTick counter and the RTC
Serial interfacestwo SPI blocks at 16 Mbit/s, two I2C blocks with SMBus and PMBus, three USARTs with ISO 7816 and IrDA support and one USB 2.0 device port clocked from the internal PLL
Analogone 12 bit ADC at 1 Msps, two 12 bit DAC channels with output buffers and two ultra low power comparators that double as a wakeup source, with capacitance sensing on up to 20 channels
Memory interfacenot present on this body
Flash and EEPROM enduranceprogram memory rated 10 kcycles minimum over minus 40 to plus 105 C with 300 kcycles typical, EEPROM 30 kcycles minimum with 300 typical, and 30 years of retention at 85 C against 10 years at 105 C
Thermal resistance junction to ambient16 C/W on UFQFPN48
Input tolerance5 V tolerant on 73 of the 83 I/O of the 100 pin body, all mappable on 16 external interrupt vectors
Debug portserial wire debug on two pins and JTAG on five, with the trace port sharing low order port bits
Backup domainthe VBAT domain keeps the RTC and the backup registers alive with the main rail off
Statusfull production per the datasheet cover

Points to check before this part goes on a BOM

The order code is C for 48 pins, B for 128 Kbytes of Flash, U for the UFQFPN body and 6 for the industrial range. The U letter is the whole difference from CBT6: memory, pinout and peripherals are identical apart from the LCD driver, which this 151 part does not carry.

The UFQFPN48 is rated 16 C/W junction to ambient against 55 C/W for the LQFP48 of the same pin count. That is not a measurement of the plastic, it is the exposed pad: the die sits on a thermal pad that the board has to solder to a copper area, and the figure only holds once that copper exists.

At 16 C/W an 85 C ambient against a 105 C junction leaves 1.25 W, which is more than this part will ever dissipate on its own. The useful reading is that the thermal question disappears and the board area question takes its place, since the pad has to be connected and cannot be used for routing.

37 general purpose I/O out of 48 pins is the same allocation as the LQFP48 codes, so a board that moves between the two bodies keeps its pin functions and changes only its footprint and its assembly process. That is why the U and T codes are treated as a pair in second source work.

The 4 Kbytes of EEPROM carry ECC and 128 Kbytes of Flash carry the application, with 16 Kbytes of SRAM for buffers. On a 48 pin part the memory is the reason to choose this code over C8T6, which drops to 64 Kbytes and 10 Kbytes of SRAM while keeping the same pinout.

1.2 microamps in Stop with the RTC and 0.9 microamps in Standby are unchanged from the LQFP version because the die is the same. The package changes the thermal path and the assembly process, not the current consumption, and a battery budget copied from the LQFP board carries over unchanged.

The 14 analog channels are shared with the USB pair, the crystal and the debug pins, as on every 48 pin body in this line. A quad flat no lead part hides the pins, so the analog assignment has to be settled from the pin table and the connector list rather than by probing a prototype with a scope.

There is no display driver here. A board that needs the glass has to take STM32L152CBU6, which is the same body and memory with 4x18 segments, and a board that needs more memory has to leave the 48 pin body entirely for the 256 Kbyte code in the xC document.

Where this order code fits

It is the 128 Kbyte part in the 48 pin quad flat no lead body, chosen where board height and thermal headroom matter more than a display driver. Boards weighing it against a neighbouring density or pin count start from our MCU Cross Reference page, and boards replacing a line that has gone end of life start from the BOM Shortage Recovery page. Both list the figures that have to match before a substitute goes on a BOM.

Questions buyers ask

Why is the thermal resistance so much lower than the LQFP version? Because of the exposed pad. The 16 C/W figure assumes the pad is soldered to a copper area on the board. Without that connection the number does not apply and the part runs closer to the LQFP figure.

Can a UFQFPN48 board be swapped for an LQFP48 board? The pin functions and the die are the same, so the firmware moves without change. The footprint, the stencil and the inspection method do not, so it is a board revision rather than a component substitution.

Does this part have an LCD driver? No. The driver belongs to the STM32L152 codes. STM32L152CBU6 is the same body and memory with 4x18 segments if the board needs a glass display.

Is 128 Kbytes the largest available in this body? In the x6/8/B document yes. The xC document carries 256 Kbytes in the UFQFPN48 body as STM32L151CCU6, with 32 Kbytes of SRAM and 8 Kbytes of EEPROM.

SUPERB holds and sources ST microcontroller lines including this order code for production and repair demand, quoted against the exact ordering string with date codes and packing stated. When a line is changing, the Pin to Pin Cross Reference page sets out the checks that keep a substitute from failing on the bench.