STM32L071CZT6
Product Specifications
STM32L071CZT6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32L071CZT6 is an STMicroelectronics ARM Cortex-M0+ MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L071CZT6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L0 | Series | ARM Cortex-M0+ based MCU — L0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L071CZT6 |
| Core | ARM Cortex-M0+ |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L071CZT6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L071CZT6 supported by STM32CubeIDE?
Yes, the STM32L071CZT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L071CZT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L071CZT6: 192 Kbytes of flash, 6 Kbytes of EEPROM and 84 I/O in a 48 pin LQFP
The L0 line is the Cortex-M0+ entry point of the ultra-low-power family, and the 071 member is the one that carries the data EEPROM. The order code reads: 071 subfamily, C is 48 pins, Z is 192 Kbytes of flash, T is the LQFP body at 7 mm by 7 mm, 6 is the industrial range. The Z density letter is easy to misread as 128 Kbytes, and the difference matters when a firmware image is being sized.
The core runs from 32 kHz to 32 MHz at 0.95 DMIPS per MHz. Memory is 192 Kbytes of flash in two banks with read while write, 20 Kbytes of RAM and 6 Kbytes of data EEPROM with ECC. The supply window reaches down to 1.65 V for the analog blocks, and the part keeps its RAM in Stop mode at sub microamp currents. The figures below are from ST's product page for the L071 line and its current data sheet.
The order code, character by character
| Product family | STM32, 32-bit Arm microcontroller |
| Product line | L0, ultra-low-power Cortex-M0+ |
| Subfamily | 071, with data EEPROM and 192 Kbyte flash option |
| Pin count | C, 48 pins |
| Flash density | Z, 192 Kbytes in two banks |
| Package | T, LQFP 7 mm by 7 mm, 1.4 mm body |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Core clock | 32 kHz to 32 MHz, 0.95 DMIPS per MHz |
| RAM | 20 Kbytes |
| Data EEPROM | 6 Kbytes with ECC |
| Supply | 1.65 V to 3.6 V |
| I/O | Up to 84 fast I/Os, 78 of them 5 V tolerant |
| Analog | 12-bit ADC at 1.14 Msps, 16 channels, two comparators |
| Serial | Four USART, one LPUART, six SPI, three I2C |
| Grade | Industrial, ECOPACK2 |
Why the data EEPROM changes the failure model
Calibration constants, meter totals and a service log usually live in a serial EEPROM beside the microcontroller. That part adds a package, a bus and a second supplier to the approved list. On the 071 the 6 Kbytes of EEPROM are on the die with ECC and a hundred thousand write cycles per page, so the log survives a power cut without an external device and without a wear levelling scheme in firmware.
The two flash banks matter for a different reason. Read while write lets the application keep running from one bank while the other is being programmed, which is what an over the air update needs on a product that cannot afford to go dark for the length of a page erase. The 20 Kbytes of RAM is the constraint: a product that stages an image in RAM has to stream it, not buffer it.
Questions that arrive with a shortage quote
Is the Z density the same as the R density? No. R is 128 Kbytes and Z is 192 Kbytes in this line. A firmware image sized for 192 will not fit a 128 part, and the two are not interchangeable on the same reel label.
Does the 5 V tolerant I/O cover the whole port? 78 of the 84 fast I/Os are 5 V tolerant, so a few pins are not. A product that mixes a 5 V sensor bus with a 3.3 V rail has to check which port pins it uses rather than assume the whole device is tolerant.
Can the EEPROM be written from the application while the flash is busy? Yes, they are separate arrays. That is the point of the part, and it is why a meter can record its total during a firmware update.
What to send with an enquiry
Send the quantity, the target date, the full order code and whether the product needs the 1.65 V analog floor, because that decides whether a neighbouring member of the line will do. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. When a density step is short, the pin to pin cross reference page shows which members share the footprint, and the one stop BOM sourcing page covers how the rest of the board is consolidated around the change.