STM32L051K8U6
Product Specifications
STM32L051K8U6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32L051K8U6 is an STMicroelectronics ARM Cortex-M0+ MCU in UFQFPN-32 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L051K8U6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L0 | Series | ARM Cortex-M0+ based MCU — L0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L051K8U6 |
| Core | ARM Cortex-M0+ |
| Package | UFQFPN-32 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L051K8U6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in UFQFPN-32 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L051K8U6 supported by STM32CubeIDE?
Yes, the STM32L051K8U6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L051K8U6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L051K8U6: 64 Kbytes of flash in a 5 mm package that wakes in 3.5 microseconds
The L0 line is the ultra low power family and the 051 is its access member. STM32 is the family, L the ultra low power line, 051 the subfamily, K the 32 pin body, 8 the 64 Kbyte flash density, U the ultra thin quad flat package with no leads at 5 mm by 5 mm and 0.55 mm tall, and 6 the industrial range of minus 40 to plus 85 degrees C. The K8U6 is the part a battery product reaches for when it needs an EEPROM, a real time clock and an ADC that works down to the supply floor, and it is the body most often quoted against a competitor's 8 bit part.
The core is a Cortex-M0+ with a memory protection unit running from 32 kHz to 32 MHz at 0.95 DMIPS per MHz, which is 30.4 DMIPS at the top of the range. The memory is 64 Kbytes of flash with error correction, 8 Kbytes of RAM and 2 Kbytes of data EEPROM with error correction, so a calibration block or a meter total can be written without an external device. The analog side is a 12 bit converter at 1.14 million samples per second over sixteen channels that keeps working down to 1.65 V, two window comparators, and a seven channel DMA engine that can move ADC results without waking the core.
The order code, character by character
| Product family | STM32, 32 bit Arm microcontroller |
| Product line | L0, ultra low power Cortex-M0+ |
| Subfamily | 051, access line with EEPROM and true RTC |
| Pin count | K, 32 pins |
| Flash density | 8, 64 Kbytes with error correction |
| Package | U, UFQFPN 5 mm by 5 mm, 0.55 mm body |
| Temperature | 6, minus 40 to plus 85 degrees C ambient |
| Supply | 1.65 to 3.6 V |
| Core clock | 32 kHz to 32 MHz, 0.95 DMIPS per MHz |
| Memory | 64 Kbytes flash, 8 Kbytes RAM, 2 Kbytes EEPROM |
| Run current | 88 microamps per MHz, so 2.82 mA at 32 MHz |
| Standby | 0.27 microamps with two wakeup pins |
| Wakeup | 3.5 microseconds from RAM, 5 microseconds from flash |
| Analog | 12 bit ADC at 1.14 Msps, two window comparators |
What 0.27 microamps of standby buys a battery product
Standby is the mode the product spends its life in, so the arithmetic is worth doing before the quote. At 0.27 microamps a year is 2.37 milliampere hours, which is under one percent of a 250 milliampere hour coin cell and roughly 0.07 percent of an AA alkaline. Add the stop mode figure of 0.4 microamps and the 0.8 microamps that keeps the RTC and 8 Kbytes of RAM alive, and the choice between the three modes is a choice about what has to survive: RAM retention costs three times the standby current, and the RTC with retention costs more again.
Run current is the other half of the budget. At 88 microamps per MHz the part draws 2.82 mA at 32 MHz, so a product that wakes every second, runs for 5 milliseconds and sleeps otherwise spends 14 microamps of average current on computation and 0.27 on sleep, which means the wake time and not the run current sets the life. A 3.5 microsecond wake from RAM is why the part exists: a conversion started 3.5 microseconds after the interrupt is a real measurement, while a part that takes 50 microseconds has already lost the event that woke it.
Questions that arrive with a shortage quote
Is the 64 Kbyte part the largest in this body? No, the subfamily ships at 32 and 64 Kbytes and the K8 is the larger of the two in the 32 pin body. The flash is 64 Kbytes with error correction and the RAM stays at 8 Kbytes across densities, so a product that moved up for code space gains nothing in RAM.
Does the EEPROM need a special write sequence? It is a separate 2 Kbyte array with its own error correction and it is written a word at a time through the same programming interface as the flash. What matters on a quote is the endurance figure and the retention figure from the current datasheet, because both are stated for the array rather than for the part, and a meter that rewrites a total every minute will exhaust a smaller array faster than a larger one.
Why does the 1.65 V floor matter? Because a lithium cell that is nearly flat still has to measure its own voltage, and the ADC keeps converting down to 1.65 V. A regulator that needs 2.0 V of headroom drops out first, so the useful life of the product is set by the regulator rather than by the microcontroller.
What to send with an enquiry
Four fields decide the price and the date: quantity, target date, the full order code with the temperature suffix, and the packing the line accepts. Send the whole string and we check it against the current revision on our MCU cross reference page, then confirm date codes, origin and packing on the quotation. Reels, trays and cut tape are available through the kitting service, and the incoming inspection plan sets out what is checked before a reel enters a production lot.