STM32L031G6U6
Product Specifications
STM32L031G6U6 — ARM Cortex-M0+ Microcontroller by STMicroelectronics
The STM32L031G6U6 is an STMicroelectronics ARM Cortex-M0+ MCU in UFQFPN-28 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32L031G6U6 | Full Part Number | STMicroelectronics ARM Cortex-M0+ Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| L0 | Series | ARM Cortex-M0+ based MCU — L0 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32L031G6U6 |
| Core | ARM Cortex-M0+ |
| Package | UFQFPN-28 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32L031G6U6 is an STMicroelectronics ARM Cortex-M0+ microcontroller in UFQFPN-28 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M0+ Core — Efficient Processing for Embedded Control
The ARM Cortex-M0+ core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32L031G6U6 supported by STM32CubeIDE?
Yes, the STM32L031G6U6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32L031G6U6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32L031G6U6: 32 Kbytes of flash, 8 Kbytes of RAM and 0.23 microamps in standby
This is the access line of the L0 family, the branch that keeps the ultra-low-power budget but drops the display driver and the USB block. G is the 28 pin UFQFPN body at 4 mm by 4 mm, 6 is the 32 Kbyte density, U is the package code for that quad flat no-lead body, and the final 6 is minus 40 to plus 125 degrees C. The same die is sold in 20, 32 and 48 pin bodies, so a board that needs two more analog inputs can move without changing the firmware.
The core is a Cortex-M0+ at up to 32 MHz with 0.95 DMIPS per MHz. Standby is quoted at 0.23 microamps with two wakeup pins, stop at 0.35 microamps with sixteen wakeup lines, and run current is 76 microamps per MHz. The 12 bit converter samples at 1.14 Msamples per second across up to ten channels and works down to 1.65 V. The figures are read from DS10668 Rev 6.
Order code and the low power budget
| Family | STM32, 32-bit Arm |
| Line | L0, access line ultra-low-power Cortex-M0+ |
| Pin count and density | G6, 28 pins with 32 Kbytes of flash |
| Package | U, UFQFPN28, 4 mm by 4 mm |
| RAM | 8 Kbytes |
| Data EEPROM | 1 Kbyte with ECC, plus a 20 byte backup register |
| Temperature | 6, minus 40 to plus 125 degrees C |
| Supply | 1.65 V to 3.6 V, or 1.8 V when brownout reset is active at power on |
| Standby | 0.23 microamps with two wakeup pins |
| Stop | 0.35 microamps with sixteen wakeup lines |
| Run | 76 microamps per MHz |
| Wakeup | 5 microseconds from flash |
| Converter | 12 bit ADC, 1.14 Msamples per second, up to ten channels |
| I/O | Up to 38 lines on the larger bodies, 31 of them 5 V tolerant |
The 1.65 V question
Two versions of this part exist and they are not the same product. With brownout reset active at power on, the operating range is 1.8 V to 3.6 V. Without it, the part runs from 1.65 V. A product that expects to work down to 1.65 V has to confirm which version the order code buys, because a 1.8 V part on a 1.65 V rail is outside specification and the failure mode is not graceful.
At the other end, the 125 degree ambient grade is unusual in a 4 mm body and it is what makes this part appear on motor housings and on sensors that sit near a heat source. The junction limit is higher still, but the ambient figure is the one that goes on the label of the enclosure.
Where 8 Kbytes of RAM is enough
A pulse counter that logs an interval, a thermostat with a setpoint table and a two wire interface, or a battery monitor that samples once a minute and reports once an hour all fit in 8 Kbytes. A product that buffers a waveform, runs a protocol stack with retries, or holds a rolling log of more than a few hundred records does not, and moving to the 8 Kbyte part to save cost usually costs a second board revision.
The 1 Kbyte data EEPROM with ECC is the part that is easy to overlook. It holds calibration constants and counters outside the program array, so a firmware update cannot overwrite them and a write cycle does not stall instruction fetch. That is why meters and sensors use a part with EEPROM rather than emulating one in flash.
What we check before shipping a 4 mm package
The 28 pin quad flat no-lead body has no leads to inspect, so the paste deposit and the reflow profile carry the joint. We confirm the packing, the date code and the moisture level on the label, and the kitting service page describes how small packages are counted and staged. For a part that is often second sourced, the pin to pin cross reference page lists where a drop in holds, and the incoming inspection plan page shows the checks applied at goods in.