Contact Us

STM32L011F3U6

Brand: ST
STM32L011F3U6 is a ARM Cortex-M microcontroller from STMicroelectronics, designed for drone electronics, embedded control systems, and industrial IoT applications. Superb Automation supplies genuine STM32L011F3U6 with full traceability, competitive pricing, and fast global delivery — supporting prototype to production volumes for drone, robotics, and industrial customers worldwide.
quote now

Product Specifications

STM32L011F3U6 — ARM Cortex-M4F Microcontroller by STMicroelectronics

The STM32L011F3U6 is an STMicroelectronics ARM Cortex-M4F MCU in N/A for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.

Part Number Decoded — Field by Field

FieldValueMeaning
STM32L011F3U6Full Part NumberSTMicroelectronics ARM Cortex-M4F Microcontroller
STM32Product FamilySTMicroelectronics 32-bit ARM-based MCU
L0SeriesARM Cortex-M4F based MCU — L0 series

Quick Specifications

ParameterValue
ManufacturerSTMicroelectronics
Part NumberSTM32L011F3U6
CoreARM Cortex-M4F
PackageN/A
Temperature Range−40°C to +85°C
Supply Voltage1.8V–3.6V

Product Overview

The STM32L011F3U6 is an STMicroelectronics ARM Cortex-M4F microcontroller in N/A package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.

Key Features & Benefits

ARM Cortex-M4F Core — Efficient Processing for Embedded Control

The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.

Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces

Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.

ST Ecosystem — CubeMX, HAL, LL, Middleware

Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.

Target Applications

Embedded Control & IoT Systems

Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.

Industrial Automation & Motor Control

Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.

Consumer & Portable Electronics

Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.

Frequently Asked Questions

Is the STM32L011F3U6 supported by STM32CubeIDE?

Yes, the STM32L011F3U6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.

What firmware/RTOS options are available?

The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.

What is the minimum order quantity (MOQ)?

Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.

Request a Quote

SUPERB Automation supplies genuine STMicroelectronics STM32L011F3U6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.

STM32L011F3U6: 8 Kbytes of flash and a 32 MHz Cortex-M0+ in a 3 mm QFN

This is the smallest member of the L0 line, and the order code is where most of the argument happens. F means a 20 pin body, F3 means 8 Kbytes of flash, U is the UFQFPN package, and the last 6 is the industrial range. An F3 part with 2 Kbytes of RAM will not take a protocol stack, so a quotation that reads only the family name can promise a part that cannot run the firmware.

The core is a Cortex-M0+ reaching 32 MHz at 0.95 DMIPS per MHz, with 2 Kbytes of RAM and 512 bytes of data EEPROM on the die. The analog side keeps the 12-bit converter at 1.14 Msps with 10 channels and two comparators, and the supply window goes down to 1.65 V, which is what a two cell alkaline product needs at end of life. The figures below are from ST's product page for the L011 line and its current data sheet.

The order code, character by character

Product familySTM32, 32-bit Arm microcontroller
Product lineL0, ultra-low-power Cortex-M0+
Subfamily011, value line with the small memory set
Pin countF, 20 pins
Flash density3, 8 Kbytes
PackageU, UFQFPN 3 mm by 3 mm, 0.6 mm body
Temperature6, minus 40 to plus 85 degrees C
Core clock32 MHz, 0.95 DMIPS per MHz
RAM2 Kbytes
Data EEPROM512 bytes with ECC
Supply1.65 V to 3.6 V
I/OUp to 38 fast I/Os, 31 rated 5 V tolerant
Analog12-bit ADC at 1.14 Msps, 10 channels, two comparators
SerialOne USART, one LPUART, one SPI at 16 Mbit/s, one I2C
GradeIndustrial, ECOPACK2

What fits in 8 Kbytes and 2 Kbytes

A thermostat, a light switch, a battery gauge or a sensor node that wakes, measures and transmits fits comfortably. A product that keeps a ring buffer, a display menu and a bootloader does not. The practical test is the map file of the existing firmware: if the image is above six of the eight Kbytes there is no room for the update path, and the 16 Kbyte member of the same line costs less than a second board spin.

The 512 bytes of EEPROM with ECC are the part most people forget to use. Calibration and a total counter survive a battery change without a coin cell, which is exactly the case where an external EEPROM would have pushed the package count past what the enclosure allows.

Questions that arrive with a shortage quote

Is the F3 density the smallest in the line? There are 16 Kbyte members with the same pinout. A reel labelled with the wrong density letter is the most common mix up on this family, so the code should be quoted in full and checked at incoming inspection.

Does the 20 pin body bring out the comparators? Both comparators are on the die, but the pins that reach them are shared with the ADC channels in this body. A product that needs a comparator input and a full analog sweep has to check the pin map, which is a different constraint from the 32 pin body.

How fast does it wake from Stop? Fast enough for a sampling product that runs at a low duty cycle, and the 1.65 V floor keeps that behaviour at end of battery life. A product that has to wake in under a microsecond is a different line.

What to send with an enquiry

Quantity, target date, the complete order code and the firmware image size are the four fields worth sending, because the size decides whether a neighbouring density will do. We check the code against the current revision on our MCU cross reference page and confirm date codes and packaging on the quotation. The kitting service page covers how a small part is consolidated with the rest of a build, and the incoming inspection plan explains the marking and reel checks that catch a wrong density letter.