STM32H7B0VBT6
Product Specifications
STM32H7B0VBT6 — ARM Cortex-M7 Microcontroller by STMicroelectronics
The STM32H7B0VBT6 is an STMicroelectronics ARM Cortex-M7 MCU in LQFP-100 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32H7B0VBT6 | Full Part Number | STMicroelectronics ARM Cortex-M7 Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| H7 | Series | ARM Cortex-M7 based MCU — H7 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32H7B0VBT6 |
| Core | ARM Cortex-M7 |
| Package | LQFP-100 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32H7B0VBT6 is an STMicroelectronics ARM Cortex-M7 microcontroller in LQFP-100 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M7 Core — Efficient Processing for Embedded Control
The ARM Cortex-M7 core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32H7B0VBT6 supported by STM32CubeIDE?
Yes, the STM32H7B0VBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32H7B0VBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32H7B0VBT6: 280 MHz and 1.4 Mbytes of RAM behind only 128 Kbytes of flash
This part inverts the usual balance. The core is the same Cortex-M7 that runs at 280 MHz in the H7A3, the RAM is the same 1.4 Mbytes, but the flash array is 128 Kbytes instead of 2 Mbytes. V is 100 pins, B is the 128 Kbyte density, T is the low profile quad flat package at 14 mm by 14 mm, and 6 is minus 40 to plus 85 degrees C. The intent is a part that executes from external memory or from a serial flash and keeps its working set on the die.
The core has double precision floating point and 16 Kbytes of data plus 16 Kbytes of instruction cache, filling a cache line from the 128-bit flash in one access, and ST quotes 599 DMIPS. The RAM is 192 Kbytes of tightly coupled memory split 64 and 128, 1.18 Mbytes of user SRAM and 4 Kbytes in the backup domain. Two Octo-SPI ports run to 140 MHz in single data rate and 110 MHz in double data rate, and both support decryption on the fly. The figures are read from DS13196 Rev 7.
Order code and the memory split
| Family | STM32, 32-bit Arm |
| Line | H7, high performance Cortex-M7 |
| Subfamily | B0, the branch with a small internal array and a large RAM |
| Pin count | V, 100 pins |
| Flash | B, 128 Kbytes plus 1 Kbyte of OTP |
| RAM | 192 Kbytes TCM, 1.18 Mbytes user SRAM, 4 Kbytes backup |
| Package | T, LQFP 14 mm by 14 mm |
| Temperature | 6, minus 40 to plus 85 degrees C |
| Core clock | 280 MHz, 599 DMIPS |
| Supply | 1.62 V to 3.6 V |
| External memory | Two Octo-SPI ports and a 32-bit controller for SRAM, PSRAM, SDRAM and NAND |
| Security | Readout protection, proprietary code protection, active tamper, secure firmware upgrade, secure access mode |
| Low power | 32 microamps in stop with full RAM, 2.8 microamps in standby, 0.8 microamps in VBAT |
| I/O | Up to 138 ports, fast lines to 133 MHz |
Executing from an external array
A 128 Kbyte internal array holds a bootloader, a driver set and a real time kernel, and the application runs from a serial NOR device on the Octo-SPI port. The cache makes that workable: a line fill from the external device costs one access for sixteen bytes of code, so a loop that fits in cache runs at core speed and a loop that does not runs at the memory speed. The decryption on the fly is what makes the arrangement acceptable to a customer who does not want the image readable on the bus.
The trade is determinism. Code in external memory has a variable fetch time, so an interrupt routine with a hard deadline belongs in the tightly coupled memory, which on this part is 192 Kbytes, more than many applications use in total.
Where the RAM is the reason for the part
A machine vision front end, a small display with a graphics buffer, or a data logger that holds a block before writing to storage all need RAM far more than they need flash. With 1.18 Mbytes of contiguous user SRAM, a 640 by 480 frame at 8 bits per pixel fits in one buffer and a second buffer fits beside it, and the core can work on one while the other is being read out. Adding that much external RAM would cost a memory controller, a rail and a set of timing rules.
The 4 Kbytes in the backup domain is small, and it is the right size for a counter or a fault record that has to survive a supply loss without a file system.
What to confirm before a 100 pin order
The density letter, the package, and whether the application expects to boot from the internal array or from an external device. A board specified for the H7A3 with 2 Mbytes of flash will not run its image on this part unchanged, and a board specified for this part needs its external memory on the bill of materials from the first prototype. We check the string and the date code, and the memory cross reference page lists the serial devices that work with the Octo-SPI ports. The MCU cross reference page compares the H7 branches, and the component lead time solutions page covers how a memory part on a long lead time is handled.