STM32H753XIH6
Product Specifications
STM32H753XIH6 — ARM Cortex-M7 Microcontroller by STMicroelectronics
The STM32H753XIH6 is an STMicroelectronics ARM Cortex-M7 MCU in TFBGA-265 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32H753XIH6 | Full Part Number | STMicroelectronics ARM Cortex-M7 Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| H7 | Series | ARM Cortex-M7 based MCU — H7 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32H753XIH6 |
| Core | ARM Cortex-M7 |
| Package | TFBGA-265 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32H753XIH6 is an STMicroelectronics ARM Cortex-M7 microcontroller in TFBGA-265 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M7 Core — Efficient Processing for Embedded Control
The ARM Cortex-M7 core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32H753XIH6 supported by STM32CubeIDE?
Yes, the STM32H753XIH6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32H753XIH6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32H753XIH6: the 240 ball body of the 480 MHz part
The X in this string is the largest package in the family, a TFBGA240 with 25 extra balls, and the H states the body. The I is the 2 Mbyte flash density and the 6 the industrial range of minus 40 to plus 85 degrees C. What sits inside is the Cortex-M7 at 480 MHz with a double precision floating point unit, 16 Kbytes each of instruction and data cache, and the cryptographic accelerator that separates the 753 from the 743.
The reason to take a 240 ball body is line count: 168 input and output ports with interrupt capability, the full external memory bus, both Ethernet and USB paths, and the camera and display interfaces all brought out at the same time. Nothing else in the family offers that combination. Figures come from DS12117 Rev 10.
The part behind the ball count
| Core | Cortex-M7 at 480 MHz, 1027 DMIPS, double precision FPU |
| Cache | 16 Kbytes instruction plus 16 Kbytes data, MPU and DSP instructions |
| Flash | 2 Mbytes with read-while-write support |
| RAM | 1 Mbyte: 192 Kbytes TCM, 864 Kbytes user SRAM, 4 Kbytes backup |
| TCM split | 64 Kbytes ITCM plus 128 Kbytes DTCM for time critical code |
| Security | Cryptographic accelerator, ROP and PC-ROP, secure firmware upgrade |
| External memory | Controller up to 32-bit data, SDRAM at 100 MHz synchronous, Quad SPI at 133 MHz |
| Power domains | D1 high performance, D2 peripherals, D3 reset and clock control |
| Supply | 1.62 V to 3.6 V, embedded regulator with scalable output |
| I/O | Up to 168 ports with interrupt capability |
| Standby current | 2.95 microamp with RTC and LSE running, backup SRAM off |
| Package | TFBGA240 plus 25, 14 mm by 14 mm |
What 168 ports are for
A 32-bit wide memory bus consumes 50 lines before any peripheral is connected. Add a camera interface, a display interface, an Ethernet RMII or MII, two USB ports and a set of timer channels, and the count is spent. Products that use this body are usually image or radar front ends, motor control platforms with multiple axes, or test instruments where the peripheral set is the product.
A BGA body has a second advantage beyond pin count: the power and ground balls are distributed across the array rather than clustered at the corners, so the current path to the die is short and the return path is direct. At 480 MHz with the cache enabled, that matters more than the package cost. Our MCU cross reference page records which bodies in this family share the die, which matters when a second source or a package change is being considered.
Assembly of a 240 ball array at 0.8 mm
The 0.8 mm ball pitch is forgiving by BGA standards, and the routing escape uses a few layers rather than a dozen. The constraints that matter are the depopulated ball pattern, the via in pad question and the reflow profile. A 240 ball body warps slightly at reflow, so the profile and the board support are part of the first article, not an afterthought.
Inspection needs X-ray for the inner rows, and a continuity test through the boundary scan or a functional test covers the rest. Our supplier quality audit page covers the lot level checks, and the component traceability report ties each shipment to its vendor lot so a ball related field failure can be traced to a production window rather than to a guess.
The 2 Mbyte array supports read-while-write, so a firmware update can be staged while the application runs. The memory map also carries the ITCM and DTCM blocks, which are the part of this device that makes a 480 MHz core useful: a control loop placed in DTCM has a single cycle access and no cache miss, and an interrupt routine in ITCM does not compete with the cache for the main array.
External memory is the other half of the budget. A synchronous SDRAM at 100 MHz on a 32-bit bus gives a bandwidth that no on-chip array can match, and the Quad SPI gives a smaller, cheaper path for boot images and fonts. Products that run a display or a frame buffer put the pixels in external memory and keep the control code in TCM, which is a split this part was built to support.
Questions from a first enquiry
Is the 753 the same as the 743 apart from the crypto block? The silicon is shared and the security engine is the difference, so a product that does not need the accelerator should be quoted on the other part rather than paying for a block it will not use. Does this body exist in the 125 degree grade? The ordering table for the family lists the industrial range only, and a request beyond it needs a different device, not a screened version.
What is the minimum packing? The tape and reel option is not available on every package in this family, and this body is normally supplied in trays. A purchase order that assumes a reel will come back as a tray, and the placement line has to be told. Our incoming inspection plan records the packing form and the date code for every delivery so that assumption is caught before the build.