STM32G474RBT3
Product Specifications
STM32G474RBT3 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G474RBT3 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-64(10x10) for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G474RBT3 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G474RBT3 |
| Core | ARM Cortex-M4F |
| Package | LQFP-64(10x10) |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G474RBT3 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-64(10x10) package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G474RBT3 supported by STM32CubeIDE?
Yes, the STM32G474RBT3 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G474RBT3 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G474RBT3: the 125 degree grade of the 64 pin part
The last character is the difference that matters here. A 3 in place of the 6 states the industrial range of minus 40 to plus 125 degrees C with a 130 degree junction instead of the minus 40 to plus 85 degrees C of the standard grade. Everything else in the string is the same family: 64 pins, 128 Kbytes of flash, LQFP body, Cortex-M4F at 170 MHz.
A 40 degree extension is not a label on the same test. It changes the retention and endurance tables, the leakage current, the ADC accuracy over temperature and the allowable clock at the top of the range, and it is the grade that gets chosen when the enclosure has no fan or when the board sits beside a power stage. All figures here come from DS12288 Rev 6.
Same silicon, different guarantees
| Order code | STM32G474RBT3, grade 3 |
| Ambient range | Minus 40 to plus 125 degrees C |
| Junction limit | 130 degrees C |
| Flash and RAM | 128 Kbytes with ECC, 128 Kbytes of RAM including 32 Kbytes CCM |
| Core | Cortex-M4F at up to 170 MHz, 213 DMIPS |
| ADC | Five 12-bit converters at 0.25 microsecond, up to 42 channels |
| Analog | Seven DAC channels, seven comparators, six op amps |
| Timers | HRTIM at 184 ps, three advanced motor control timers |
| Fieldbus | Three FDCAN, five USART, four SPI, four I2C |
| Retention | 7 years at 125 degrees C after 1 kcycle, 30 years at 85 degrees C |
| Endurance | 10 kcycles from minus 40 to plus 105 degrees C |
| Package | LQFP64, 10 mm by 10 mm |
What changes at 125 degrees C
Two numbers move first. Retention falls from 30 years at 85 degrees C to 7 years at 125 degrees C after a single erase cycle, so a product expected to hold calibration for fifteen years in a hot cabinet has to be checked against that row and not against the headline. Leakage and quiescent current rise with temperature as well, which matters on a battery backed board that wakes on an RTC alarm.
The ADC is the third. Accuracy is specified over the operating range rather than at 25 degrees C, and the offset and gain drift at the top of the range are larger than the room temperature figures suggest. A board that calibrates once in the factory and never again needs a temperature compensation table, which is cheap in firmware and expensive to add after the product is in the field. Our supplier quality audit page describes how we verify the grade on a delivered lot, because a 6 grade part will not be marked as a 3 and the difference is only visible in the code and the label.
Where the grade is worth the price
A pump controller in a metal cabinet, a valve actuator next to a hot pipe, a downhole tool, a charger mounted beside an engine: these are the places where 85 degrees C stops being enough. The junction runs above ambient by the thermal resistance times the dissipation, so a 0.5 W device in a small LQFP64 body on a two layer board can add 40 degrees, and a 70 degree ambient then sits at the junction limit before any margin is applied.
The 128 Kbyte array is the second half of the decision. It is a single bank part, so a field update cannot run read-while-write, and the loader has to either stop the application or copy itself to RAM before erasing. Where the product must be updated without a stop, the 512 Kbyte member of the same family is the one to quote, and the pin count can stay at 64. The MCU cross reference page lists the density steps inside each body so that a change of plan does not become a change of board.
Checks before the purchase order
Is the marking different from the 85 degree part? The code on the body carries the full order string up to the temperature digit, so the 3 is printed and can be read at goods in. Is the junction limit of 130 degrees C a licence to run at 125 ambient? No, the thermal path has to be calculated, and a 5 degree margin at full load is not a margin.
Does the higher grade cost more? Yes, and the difference is not small at low volume, which is why it is worth confirming that the enclosure really needs it before the order code is frozen. Our component traceability report carries the grade and the lot for every reel we ship, so a later change of grade can be traced to a specific delivery rather than to a general assumption.