STM32G474CBT6
Product Specifications
STM32G474CBT6 — ARM Cortex-M4F Microcontroller by STMicroelectronics
The STM32G474CBT6 is an STMicroelectronics ARM Cortex-M4F MCU in LQFP-48 for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation.
Part Number Decoded — Field by Field
| Field | Value | Meaning |
|---|---|---|
| STM32G474CBT6 | Full Part Number | STMicroelectronics ARM Cortex-M4F Microcontroller |
| STM32 | Product Family | STMicroelectronics 32-bit ARM-based MCU |
| G4 | Series | ARM Cortex-M4F based MCU — G4 series |
Quick Specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32G474CBT6 |
| Core | ARM Cortex-M4F |
| Package | LQFP-48 |
| Temperature Range | −40°C to +85°C |
| Supply Voltage | 1.8V–3.6V |
Product Overview
The STM32G474CBT6 is an STMicroelectronics ARM Cortex-M4F microcontroller in LQFP-48 package. Part of ST's extensive STM32 portfolio, it delivers a high-performance processing platform with integrated Flash, SRAM, and a rich set of communication peripherals for Embedded control and general-purpose MCU applications. Supplied by SUPERB Automation with full traceability and competitive lead times.
Key Features & Benefits
ARM Cortex-M4F Core — Efficient Processing for Embedded Control
The ARM Cortex-M4F core provides deterministic real-time performance with hardware multiply/divide and optional FPU, executing control loops, communication stacks, and sensor fusion algorithms efficiently in resource-constrained embedded environments.
Rich Peripheral Set — GPIO, Timers, ADC, Communication Interfaces
Features a comprehensive set of on-chip peripherals including multi-channel DMA, 12/16-bit ADCs, advanced PWM timers for motor control, and multiple USART/SPI/I²C interfaces for sensor and communication module connectivity.
ST Ecosystem — CubeMX, HAL, LL, Middleware
Fully supported by ST's STM32Cube ecosystem including CubeMX graphical configuration, HAL/LL driver libraries, FreeRTOS integration, and extensive middleware stacks (USB, TCP/IP, FATFS, graphics) — accelerating firmware development and reducing time-to-market.
Target Applications
Embedded Control & IoT Systems
Functions as the main processing unit in embedded control systems, IoT endpoints, sensor hubs, motor controllers, and human-machine interfaces — leveraging the Cortex-M architecture for efficient, low-power operation.
Industrial Automation & Motor Control
Powers industrial motor drives, PLCs, sensor transmitters, and factory automation equipment — taking advantage of advanced PWM timers, high-speed ADCs, and CAN/RS-485 communication for distributed control architectures.
Consumer & Portable Electronics
Integrates into consumer devices, wearables, smart home products, and portable instruments — benefiting from the STM32 family's low-power modes, small packages, and extensive third-party firmware ecosystem.
Frequently Asked Questions
Is the STM32G474CBT6 supported by STM32CubeIDE?
Yes, the STM32G474CBT6 is fully supported in STM32CubeIDE with graphical pinout configuration, clock tree setup, and automatic peripheral initialization code generation — enabling rapid prototyping and production firmware development.
What firmware/RTOS options are available?
The STM32 family is supported by FreeRTOS, Zephyr, NuttX, ChibiOS, and bare-metal HAL programming. For drone applications, Betaflight, iNav, ArduPilot, and PX4 all have STM32 HAL targets.
What is the minimum order quantity (MOQ)?
Contact SUPERB Automation for a tailored quote. We support quantities from prototype tray to full production volumes.
Request a Quote
SUPERB Automation supplies genuine STMicroelectronics STM32G474CBT6 MCUs with full traceability and batch-level QA documentation. Whether you need a single tray for prototype builds or pallet-level volumes for production, we source through verified channels with competitive lead times. Contact us with your target quantity and delivery date — we'll respond with a detailed quotation within 24 hours.
STM32G474CBT6: the 48 pin entry to the G474 family
The B is 128 Kbytes of flash in this order code, and it is the smallest array the STM32G474 family offers. Everything else is the same family silicon: Cortex-M4F at 170 MHz with a floating point unit and the CORDIC and FMAC accelerators, five 12-bit converters at 0.25 microsecond, the high resolution timer at 184 ps, three FDCAN controllers and USB full speed, in a 7 mm by 7 mm LQFP48 body.
This is the part that gets chosen when a product needs the analog and timing features of the G4 line but runs a compact application. The trade against the 512 Kbyte member is code space and the loss of read-while-write on the flash array, and neither one matters on a control loop that fits in 80 Kbytes. Figures come from DS12288 Rev 6.
What 128 Kbytes buys in this body
| Flash | 128 Kbytes with ECC, single bank, 1 Kbyte OTP |
| RAM | 128 Kbytes total, 96 Kbytes SRAM plus 32 Kbytes CCM |
| Core | Cortex-M4F at 170 MHz, 213 DMIPS |
| ADC | Five converters, 12-bit at 0.25 microsecond, 16-bit by oversampling |
| DAC | Seven channels, three buffered external at 1 MSPS |
| Comparators and op amps | Seven rail to rail comparators, six op amps with PGA |
| Timers | HRTIM at 184 ps, three advanced motor control, two 32-bit general purpose |
| Fieldbus | Three FDCAN, five USART, one LPUART, four SPI, four I2C |
| Package | LQFP48, 7 mm by 7 mm, 0.5 mm pitch |
| I/O | Up to 40 fast lines, several 5 V tolerant |
| Supply | 1.71 V to 3.6 V, separate VDDA |
| Temperature | Minus 40 to plus 85 degrees C, 105 degree junction |
Small code, large RAM
The unusual part of this family is that the RAM does not scale with the flash. 128 Kbytes of RAM against 128 Kbytes of code inverts the usual ratio, and it is what makes the part comfortable for a signal chain where a sample buffer, a filter state array and a communications ring all have to be live at once. A 4096 point FFT on 32-bit floats needs 16 Kbytes for the data and the same again for the working buffer, and that fits with room for the rest.
The CCM block adds a second benefit. It is on its own bus, so a routine that runs from it does not compete with the DMA that fills the sample buffer, and the timing of the inner loop stays flat regardless of what the peripherals are doing. On a motor current loop at 20 kHz that flatness is what a control engineer is buying.
Single bank and the update route
A single bank array cannot be read while it is erased. The loader therefore runs from RAM, copies the new image across and jumps to it, which needs a few kilobytes of RAM and a supply that holds through the erase. Page erase on this array is fast, and a hold up capacitor of a few hundred microfarads on the 3.3 V rail covers the operation on a board with a normal load.
Where the update has to happen with the process running, this is the wrong member and the 512 Kbyte part in the same body is the answer. Our MCU cross reference page lists the density steps inside each package so that the decision is made once rather than after the board is etched.
Buying and handling notes
The part is a standard industrial grade, not an automotive qualified device, and a request that needs AEC-Q100 should be quoted on a different family rather than on a screened version of this one. Packing is tray or tube unless the TR suffix is named, and small builds often arrive on cut tape, which a placement line cannot load without a re-reel step.
Moisture handling follows the bag label. A part that has been out of the bag for longer than the floor life is baked before reflow, and that rule applies here as it does to any fine pitch body. Our kitting service page describes how the reels, the dry pack and the moisture cards are staged per build, and the incoming inspection plan records the marking, the date code and the pack form at goods in.